Limited Expedition One Owner 5.4 on 2040-cars

Auto blog

A cool boost to turbocharger performance

Since the advent of the forced-induction engine, we have been looking for ways to get every drop of performance we can. There are many approaches to getting additional power using better intercooling, water injection, or even adding nitrous oxide. One take on a short instant burst of power is being researched by Mahle and involves providing supercooled air to an engine, which allows it to burn a leaner fuel mixture and produce more power. The supercooling idea is not new and was examined by Ford in 1993 on the Mustang Mach III concept car, then brought up again in 2003 with the SVT F-150 Lightning concept. Ford called its system the SuperCooler; it was designed to work with any turbocharged or supercharged engine equipped with a water-to-air intercooler. The system on the Lightning concept used a small tank of antifreeze that was hooked up to the truck air conditioning compressor. The air conditioning compressor cooled the antifreeze down to about 30 degrees. The other side of the tank was hooked up to the air-to-water intercooler, which usually had a temperature over 100 degrees. Once the antifreeze was circulated from the tank into the intercooler, it would lower the intercooler temperature and provide for a cooler, denser air charge into the engine; the result was around 50 extra horsepower for a burst of about 30 seconds to a minute, depending on the size of the tank. The system for the Lightning was to be offered as a $750 option and would have been targeted towards drag racers and the like, as it could be used for a run down the drag strip and then re-cooled by the time the truck was back in line. The system was fairly non-intrusive – it only weighed about 25 pounds and did not require a new compressor or intercooler. But as with many concepts, it was ultimately scrapped. The technology was always stuck in the back of my mind, but with larger and more powerful engines being produced it could not find its place. With the advent of new fuel economy standards, we have seen small-displacement turbocharged engines pop up and they seem like the perfect candidate for this type of technology. Ford's EcoBoost 1.0-liter three-cylinder turbocharged engine, as used in the Fiesta and Focus, is one such candidate for this technology. It would add a negligent amount of weight but could provide a boost of 10 to 20 horsepower when needed, like merging onto the highway or catching up to traffic.

Ken Block's 1965 Ford Mustang Hoonicorn RTR and CR Supercars Villain are retro done right

Gymkhana king Ken Block has had a pretty simple car history in his trademark videos, starting out with Subaru Impreza rally cars before moving into Ford Focus racers for the past four installments. His next video, though, Gymkhana Seven, kind of goes back in time.
Rather than the cutting-edge rally racers of past videos, Block will pilot a heavily modified 1965 Ford Mustang, called the Hoonicorn. How heavily modified is it? Well, Block's Hooligan Racing Division, ASD Motorsports and Vaughn Gittin Jr.'s RTR, spent two years working on it, ditching the standard engine and rear-wheel-drive layout and replacing it with a 410-cubic-inch Roush Yates V8. Yes, that's a NASCAR engine, and it produces 845 horsepower.
A NASCAR-powered Mustang would be news in itself, but it's the other powertrain changes made by Block and Co. that really makes headlines. Power is channeled through a one-off Sadev transmission and all-wheel-drive system, meaning that Block has basically married a NASCAR stock car with a WRC racer. ASD also developed the customized suspension, tubular chassis and roll cage. The wide Mustang body is the work of RTR and Block's own Hoonigan Racing Division, while the 18-inch fifteen52 wheels are shod in Pirelli Trofeo R tires that use a specialized compound exclusive to Block.

2015 Ford F-150 spied in the rain

Standing as quite a contrast from the spy shots of the 2015 Ford Mustang we saw earlier today, our spies also sent along these pictures of the next-generation F-150 pickup out testing in its (heavily camouflaged) full prototype body. Much of the new truck's design is hidden under the bulky coveralls, but we expect a lot of its new lines to be inspired by the Atlas concept that debuted at the 2013 Detroit Auto Show.
Perhaps the biggest unknown surrounding the new F-150 is what, exactly, its body will be made of. Earlier reports have suggested that lightweight aluminum materials may be used throughout, offering a serious reduction in weight versus previous models. But Ford engineers will need to be careful, though, as they need to keep a tight rein on costs while preserving class-competitive (if not class-leading) towing and payload capacity.
On the powertrain front, the new F-150 will undoubtedly carry on with EcoBoost engines, and we'd bet on a normally aspirated V8 as well. A diesel option hasn't been confirmed, but we wouldn't be surprised to see one some time in the truck's lifecycle. Mum's the word on when the production F-150 will be revealed, but our best guess is that we'll see it at the 2014 Detroit Auto Show.