2001 Ford Expedition Xlt 4x4 Triton V8 Auto Clean!! No Reserve!! on 2040-cars

Auto blog

Ford recalls 2020-21 Explorer and Lincoln Aviator, 2021 E-Series

Ford announced safety recalls for the 2020-2021 Explorer and Lincoln Aviator along with the 2021 E-Series early Monday. The recalls address entirely different issues.  In the case of the 2020-2021 Ford Explorer and Lincoln Aviator, that issue is motor mount hardware. Specifically, the fasteners that secure the passenger-side motor mount may back out. In Ford's words, this can result in a "loss of power," which is the entirely predictable result of an engine parting ways with the vehicle it powers.  As alarming as that may sound, owners should not have to worry about anything extreme, as the passenger side mount is only one of multiple, and Ford says it is not aware of any incidents that have occurred with vehicles in customer hands. Ford says it impacts only about 1400 examples of the Explorer and Aviator in the States (plus two in Mexico and 65 in Canada) that were built at Chicago Assembly Plant between July 28 and 30, 2020. Ford is in the process of alerting its owners to the recall, and those with affected models will have their mount hardware replaced by their local Ford dealerships free of charge.  The 2021 E-Series is being recalled for a potential heat management issue resulting from improperly aligned thermal insulation on the underside of its engine cover. In vehicles where this insulation was not properly installed so that it reaches all the way to the edges of the cover, the resulting heat bleed can cause high in-cabin surface temperatures, and direct contact them could result in burns.  This is the larger of the two recalls, as Ford says it covers nearly 33,000 examples sold in the United States and Canada. Fortunately, as with the above issue, Ford says it has not been made aware of any customer incidents. Ford says the remedy is a set of insulation patches for the exposed areas.  Related Video:

Ford to revisit CVTs?

Today, Ford wishes its first experience with non-hybrid continuously variable transmissions was far behind it. The Blue Oval was awash in complaints and a couple of class-action lawsuits over the CVTs used in its 2005-2007 Ford Freestyle, Five Hundred and Mercury Montego models, which were a manufactured in Batavia, Ohio as part of a joint venture with ZF. The company gave up on the CVT after just two years, but with fuel economy standards pressing automakers to conjure new tricks, Ford's global product development head, Raj Nair, is now saying the transmissions might make a return, "particularly in the low torque applications," says Automotive News. An obvious candidate for CVT consideration is the 1.0-liter Fiesta that can presently only be had with a five-speed manual. Beyond that, the company's 1.6-liter and 2.0-liter four-cylinder engines might fit the bill. Ford hasn't given any indication as to what vehicles it might use to reintroduce the CVT to the US market, or hints about timeline or who would develop it, however. Some CVT trivia: The 1990 Subaru Justy II was the first US passenger car offered with a continuously variable transmission - Subaru called it the ECVT. It handled gearing duties for a 1.2-liter, inline three-cylinder engine that got all of 70 horsepower. A contemporary blurb about the car begins with "Goodness, gracious, great gobs of gimmickry," and goes on to say that "We can't imagine where you would take this car for repairs, but we are certain that the one mechanic in the world who can fix it lives in a very expensive house." The transmission didn't win any fans, but the ECVT and the car have been largely forgotten, while Subaru played the long game and now you'll find its vastly improved Lineartronic CVT on six of the eight models it sells.

Will the new Ford GT race at Le Mans?

Ford stole the spotlight here on the floor of the Detroit Auto Show this year with the reveal of the new GT. Its carbon-fiber chassis, 600-plus-horsepower EcoBoost engine and radical aerodynamic shape made sure of that, but flanking it with the debuts of the Mustang GT350R and F-150 Raptor didn't hurt any, either. Any racing fan looking at the new Blue Oval supercar, however, had to wonder whether Dearborn is planning on putting it on the race track. The House that Hank Built is, after all, a known entity in motor racing. It may be canceling its V8 Supercars program Down Under, withdrawn its support from the World Rally Championship, and it's been years since it's competed in Formula One or Indy. But it still competes in the United SportsCar Championship, NASCAR, NHRA and a variety of motor racing disciplines. One of its most famous and celebrated of racing endeavors, however, came in the form of the original GT40 that brought Ford four consecutive victories at the 24 Hours of Le Mans, starting with a dominant one-two-three finish in 1966. It's the 50th anniversary of that landmark win which the new Ford GT celebrates, but while the press materials made clear reference to that historical event, any mention of a return as was previously speculated was carefully omitted. That, according to Autosport, could come down purely to the ACO, the organizers of the event and sanctioning body for its associated series, which has yet to announce the revised format for the GTE class under which a potential Ford GT racer would compete in 2016. Longtime Ford racing partner Multimatic is said to have closely consulted with the ACO on the formation of those rules, however, and assuming they're finally formulated to Dearborn's liking, we could be looking at a GTE-spec Ford GT to return to La Sarthe next year in celebration of that landmark victory half a century prior. Chip Ganassi Racing – which races under Chevy power in NASCAR and Indy but recently switched to Ford for its Daytona Prototype – is said to be in line to field the car on Dearborn's behalf. If given the green light, it would be the first time Ford would field a factory effort at Le Mans since the C100 project under the Group C category in the early 1980s. A racing version of the previous Ford GT was prepared by Switzerland-based Matech a few years ago, but without factory support or notable success beyond the FIA GT3 European Championship.