2003 Ford Excursion Limited Suv 7.3l Power Stroke Diesel 2wd Tv/dvd Third Row on 2040-cars

Auto blog

Winnebago re-introduces classic Brave RV [w/video]

Winnebago is saying 'Let's do the time warp again,' using its new Brave RV to do it – have a look at the first Winnebago RV from 1966 and you'll know exactly where this one comes from. The modern version of this swinging sixties motorhome is accurate from its size, either 26- or 27-foot version, to its trademark eyebrow above the front windshield. The foldaway bunk above the front seats that necessitated the eyebrow design has been updated, and is now a power bed that descends from the ceiling. It is among a set of standard features that also includes a 19-foot motorized awning, leveling jacks at all four corners, heated mirrors, LED ceiling lights, two available floorplans and detailing like a workstation for the front passenger, a sliding dash cluster and and a waterfall countertop in the kitchen with built-in extensions. The Brave sits on a Ford F53 chassis complete with its Triton V10 engine and five-speed automatic transmission. No word yet on any potential diesel alternatives. Naturally, that 1966 price of $4,000 will also come in for an update, but the company hasn't yet revealed it. The good folks from Winnebago will be happy to take you on a thorough personal tour of the Brave in the video below. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. News Source: Winnebago via YouTubeTip: John Auto News Ford Truck Special and Limited Editions Videos motorhome recreational vehicles winnebago

Ford issues recalls for Fiesta, Fusion, E-Series, and Lincoln MKZ

Ford has issued two new safety recalls for North America. The first covers certain 2014-15 Ford Fiestas, 2014-16 Ford Fusions, and 2014-16 Lincoln MKZs with doors that might not close properly. The second pertains to 2021 Ford E-Series stripped chassis and cutaway vehicles with a wiring harness that might chaffe and expose important wiring.    Ford is recalling 268,343 Fiesta hatchbacks, Fusion sedans, and MKZ sedans across the United States, Canada, and Mexico, with 248,912 of the affected vehicles located in the U.S. The recall says the "latch pawl spring-tab design" could crack in locations where the temperature gets too hot. If the tab breaks, the door might not shut. Or, worse, the door will shut temporarily and reopen once the vehicle is in motion. As a fix, Ford dealers will remove and replace the side door latches. In a separate recall, Ford is targeting 3,631 2021 E-Series stripped chassis and cutaway vehicles. These vehicles could have frame-mounted wiring harnesses that could deteriorate and break due to rubbing on the frame. If the chaffing wears down the harness, wiring for the fuel, trailer tow, and antilock braking systems could be exposed and damaged. In the worst-case scenario, the damage to the fuel pump wiring could cause the pump to stop working, which could stall the vehicle.  Those with affected E-Series vehicles should bring them in to dealerships for inspection. If there is no damage, technicians will add anti-abrasion tape over the area and "ensure clearance to surrounding components." If the harness is damaged, the wiring will be spliced and fixed, then anti-abrasion tape will be added. Ford also issued a third recall, but it is specifically for the Canadian market. On 54,292 examples of 2006-10 Ford Fusions, 2006-10 Mercury Milans, and 2006-10 Lincoln MKZs, a valve inside the hydraulic control unit might stick open. According to Ford, this could result in a longer brake pedal travel, which could possibly create dangerous situations if the driver is unaware. Dealerships will inspect the control units and replace those that are defective. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. 2021 Ford Bronco and Bronco Sport Leaks!!

NHTSA investigating Ford's solution to May 2014 power steering recall

The National Highway Traffic Safety Administration is investigating a complaint that Ford's response to a May 2014 recall of the 2008 to 2011 Ford Escape and Mercury Mariner doesn't quite go far enough to solve a troubling power-steering problem. Roughly a year ago, Ford recalled nearly a million vehicles after it was found that a problem with the torque sensor's communication with the power steering control module could cut steering assistance for drivers. While manual steering would still be available, the problem was enough to ask drivers to report in to have the PSCM inspected, and if necessary, replaced (along with the torque sensor, or in dramatic cases, the entire steering column). That would only happen, though, if trouble codes were being thrown. If there weren't any problems, dealers were told to simply update the PSCM's software so that any issues between it and the torque sensor would simply throw a visual and audio warning – power steering would still be maintained. The petitioner claimed that following the recall work, he still experienced a problem with the torque sensor. According to NHTSA, a claim was made that Ford didn't go far enough in its solution to the problem, and that "the software update itself may in fact cause further issues with the affected vehicle's power steering, causing it to fail, and ultimately requiring replacement of the torque sensor or entire steering column." The petition was filed in early February and is now officially being looked into by NHTSA.