2001 Ford Excursion Xlt 6.8l Limousine on 2040-cars

Auto blog

Why Edmunds took a sledgehammer to its 2015 Ford F-150

The discussion around repair bills for the aluminum-bodied 2015 Ford F-150 pickup continued from the beginning of last year to the end, and haven't abated; as an aside, some Tesla Model S owners have been shocked at disquieting repair estimates for minor damage to their aluminum wunder-sedans. Edmunds decided to inject some fact into the fray: it bought a $52,000 long-term 2015 F-150 and clouted it with an eight-pound sledgehammer. Twice. The rear of the bedside took the impacts since it couldn't be replaced, it would have to be repaired. To the pickup's credit, the only reason associate editor Travis Langness hit it twice was that the first sledgehammer blow didn't do as much damage as Edmunds wanted. After the second, the visible damage included the two direct impacts, a few creases, and a cracked taillight, so they drove the pickup to Santa Monica Ford to get an estimate, complete with a fictitious story about how the damage occurred and the mercy plea that Langness was paying for the repair out-of-pocket. In Part 2 Langness hits on some of the details with getting the truck fixed, such as the massively expensive taillight and the list of tools Ford recommends dealers have to work on aluminum. But he was promised he'd have his truck back in seven days, and Santa Monica Ford got it back to him in seven days. In Part 3 we get the bill. It's not small, but it's quite a bit less than it could have been if the service manager had charged Edmunds the official labor rate for aluminum. We're not going to spoil it here, so check out the videos above and below for the beginning and the end, and head over to Edmunds for the complete story about how it all happened and some riffing on the repair numbers. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Related Video:

Hurricane Sandy cost automakers 15,000 vehicles, may have ruined up to 200k

Hurricane Sandy was the largest Atlantic storm in US history, and its total economic impact is just now coming into view. According to Automotive News, Toyota, Chrysler, Nissan and Honda are set to scrap around 15,000 new vehicles ruined by the storm. Nissan alone accounts for about 40 percent of those, with 6,000 Nissan and Infiniti models deeded "un-saleable" due to damage. The company saw 56 dealerships shuttered due to the storm, but 51 of those have since reopened.
Toyota, meanwhile, had some 4,000 vehicles at its Newark port facility, and of those, 3,000 may be scrapped. An additional 825 were dealer inventory when they were ruined. Honda and Acura dealers are reportedly sending 3,440 vehicles to the salvage yard. By comparison, Chrysler weathered the storm fairly well with 825 units destroyed, while Hyundai suffered only 400 lost units and Kia scrapped around 200.
As you may recall, Fisker also suffered some losses, and Automotive News reports the manufacturer saw 320 Karma models damaged beyond repair. Ford and General Motors have yet to come up with estimates, and no automaker has commented on the full cost of replacing the vehicles.

2015 Ford Transit

As a segment, fullsize vans are stealth-fighter invisible on most consumers' radar. Visit a dealership for any of the four brands that offer them and you'll be lucky to find even one on display. These are commercial vehicles primarily, even more so than pickup trucks. Vans are the shuttles for plumbers, caterers, carpenters, concrete layers, masons, electricians, florists and flooring, and a huge part of this country's productivity is accomplished using them. At the moment, Ford is the 800-pound gorilla in that room - fully 41 percent of commercial vehicles wear a Blue Oval. So when Ford announced three years ago it would be ditching its commercial bread-and-butter E-Series, it meant the Transit that would be replacing the Econoline had huge, 53-year-old shoes to fill.
We were still a bit nostalgic about Econoline vans going away until going directly from the Transit first drive in Kansas City to an E-350 airport shuttle. Climb up through the Econoline's tiny double doors and bang your head on the opening, crouch all the way to your seat then enjoy a loud, rattle-prone, creaky, harsh ride on beam-hard seats while struggling to see out the low windows. This is an experience nearly every traveler has had. By comparison, the Transits we'd just spent two days with were every bit of the four decades better they needed to be. It cannot be understated just how much better the Transit is in every single way. The load floor is barely more than knee high. There's a huge side door, and hitting your head on a door opening is nearly impossible. Stand up all the way if you're under six-foot, six-inches - no more half-hunching down the aisle. There are windows actually designed to be looked out of. The ride is buttery smooth, no booming vibration from un-restrained metal panels and no squeaks. Conversations can be held at normal levels rather than yelling over the roar of an ancient V8. The seats are comfortable. The AC is cold. There are cupholders.
Enough anecdote-laying, what's in a Transit? We're talking about a very fullsized unibody van that's enjoyed a 49-year history in Ye Olde Europe. This latest iteration is part of the "One Ford" initiative, so it was designed as a global offering from the get-go, eschewing the body-on-frame construction the E-Series has used since 1975. Instead, the Transit integrates a rigid ladder frame into an overall frame construction made of high-strength cold-rolled and boron steel. The suspension is a simple but well-tuned Macpherson strut array up front with a rear solid axle and leaf springs.