Used 1998 Ford Escort Zx2 Hot Coupe 2 0l on 2040-cars

Auto blog

Project Ugly Horse: Part VI

Solid axle? What solid axle?
I was fully prepared to embark on a seven-day journey down a rabbit hole of broken bolts, internet hearsay and consternation.
This should not have gone this easily. Having a long and checkered history of simple projects punctuated by much wailing and gnashing of knuckles, I was fully prepared to embark on a seven-day journey down a rabbit hole of broken bolts, internet hearsay and consternation when I finally decided to lay hands on the '89 Mustang with the goal of relieving the car of its stock rear axle. Instead, it took less than a full morning's worth of work to carve the old 7.5-inch solid axle from its moorings and mock up something, well, different.

NHTSA closes Ford F-150 EcoBoost acceleration probe

Typically when we report on the findings of an investigation from the National Highway Traffic Safety Administration, it's because the government body has discovered a safety issue and prescribed a recall. In this case, however, NHTSA has closed an investigation into a reported performance deficit without ever getting to the recall stage.
The issue revolves around the Ford F-150 - specifically those equipped with the 3.5-liter EcoBoost engine - of which some 360,000 were built in the 2011, 2012 and 2013 model years. After receiving an initial 95 complaints, NHTSA opened an investigation last May - almost a year ago - into the reported issue of reduced engine power under hard acceleration. The agency has since received a total of 525 such complaints, and Ford itself reported receiving over 4,000.
Together, NHTSA and Ford determined that the problem resulted from cylinders misfiring, an issue itself stemming from water getting into the charge air cooler (CAC) mated to the turbochargers. In particularly humid or rainy conditions, water was found to get into the CAC, causing some of the cylinders to misfire, which in turn triggered the ECU to disable those cylinders in order to protect the catalytic converter from damage.

Introducing the 1965 Ford Mustang

Put on your space suits and diving bell helmets, for it's time to step into a time capsule. The 50th anniversary of a historic model, like, say, the Porsche 911 this year, is certain to bring flights of nostalgia. This historical trip with the 1965 Mustang, though - preliminary hype for next year's anniversary, we know - is a swell museum exhibit for anyone who enjoys bygone days of the automobile.
Lee Iaccoca gave a speech to motoring journalists on April 1, 1964 at the New York World's Fair to introduce a sporty car for younger drivers. His opening line: "Good morning, ladies and gentlemen. Welcome to one of the proudest moments of our lives." The company was so excited by what it had made that the Mustang was Ford's first "International Press Introduction," being introduced to some 2,000 journos around the world on the same day in the US and 11 European cities. Even through its difficult points, no one at the time could have known how well the Mustang would acquit that pride.
After the intro, the press drove Mustangs 750 miles from New York to Dearborn, MI, reading press kits that touted features like the "vertical, three-sectional taillights/turn signals," "170" six-cylinder engine with 101 horsepower and the available Cruise-O-Matic transmission.