Autopark Navigation Sync Xenon Bluetooth Sony Camera Bsa Mirror 19" Wheels Turbo on 2040-cars

Auto blog

NHTSA investigating Ford Fiesta for faulty door latches

The National Highway Traffic Safety Administration has opened a preliminary investigation on the 2011-2013 Ford Fiesta because the regulator has received 61 complaints from drivers, including one claim of an injury, about the doors on the subcompacts failing to latch and sometimes even flying open while driving. NHTSA has estimated that the problem could affect as many as 205,000 vehicles.
NHTSA is still gathering further data about the problem, but looking at the complaints so far, both front and rear doors appear to be potentially involved with the alleged failures. Among the reports, there are 12 claiming that the door opened while driving. Several also indicate the "Door Ajar" warning illuminating during this problem. The one purported injury happened when someone attempted to shut the door, and it bounced back.
Ford spokesperson Kelli Felker told Autoblog via email, "We are cooperating with NHTSA on this investigation, as we always do." Scroll down to read the report from NHTSA.

RTR Spec 5 Concept shows off 2015 Ford Mustang's drifty potential

Meet the Ford Mustang RTR Spec 5 Concept, a fully functional drift car that, according to our team in Sin City, has been doling out demo drifts in front of the Las Vegas Convention Center.
Destined to be the flagship of RTR's Tactical Performance Line, the Spec 5 Concept is, in addition to its 5.0-liter Aluminator V8 engine, chock full of performance parts that you can buy for your very own 2015 Mustang. In addition to the Ford Racing engine, the OEM parts supplier has lent the Spec 5 an aluminum radiator and a close-ratio six-speed transmission.
ASD Motorsports provided the front lower control arms, while the car itself rides on a fully customized coilover suspension. Magnaflow and American Racing have provided the exhaust system and headers, respectively. 20-inch HRE wheels, designed for RTR, are wrapped in sticky Nitto rubber.

Automakers' rush on aluminum may result in shortage

Aluminum is the new buzzword in the automotive industry. The latest Range Rover and Range Rover Sport both take advantage of the lightweight material to shave huge amounts of body fat (only it's called "aluminium" over there). Audi and Jaguar have been using the stuff for years in their A8 and XJ, respectively, and now, aluminum is going mainstream, arriving on the 2015 Ford F-150.
While we're excited to see aluminum make an impact outside the premium market, its widespread adoption apparently won't come without some problems, notably in terms of supply. "There isn't an automotive manufacturer that makes vehicles in North America that we're not talking to," Tom Boney, of Novelis, the largest global supplier of aluminum sheetmetal, told The Detroit News.
According to Boney, Ford's use of aluminum on such a large scale has forced auto manufacturers in "every boardroom" to reconsider their plans following the F-150's unveiling, for one simple reason: there's not exactly enough aluminum to go around, at least in the short term. The auto industry presently only accounts for six percent of the aluminum sheet produced, but as the material is adopted by more and more brands, that figure is expected to swell to 25 percent within the next six years.