4wd Black Hybrid Loaded Leather Cheap Delivery With Buy It Now Fully Serviced on 2040-cars

Auto blog

Ford and Lincoln recall about 170,000 vehicles over defective rear-view camera

Ford and Lincoln have jointly issued a safety recall that includes nearly 170,000 vans and SUVs built between the 2018 and 2023 model years. The vehicles included in the campaign are equipped with a rear-view camera whose image can cut out while the driver is backing up. Assigned recall number 23V-598 by the National Highway Traffic Safety Administration (NHTSA), the campaign includes the following cars: 7,649 units of the 2020-2023 Aviator fitted with the standard rear-view camera and built from October 19, 2019, to August 17, 2023. 70,600 units of the 2018-2021 Navigator fitted with the 360-degree camera and built from March 16, 2017, to December 23, 2021. 66,740 units of the 2022-2023 Transit fitted with either camera system and built from February 26, 2021, to August 17, 2023. 24,468 units of the 2021 Bronco fitted with the 360-degree camera and built from September 23, 2020, to December 22, 2021. Ford explains that the defect is present in all of the 169,277 vehicles included in the campaign. While these are different cars equipped with different technology, they all suffer from the same problem. The company explains that "customers may intermittently experience either a rear camera blue image or a full blue or black image on the SYNC [infotainment system] screen when the vehicle is placed in reverse, or when the 360-degree view is selected and available." It adds that losing the camera's image while backing up increases the risk of the crash. The cause of the problem varies from model to model. Ford has narrowed it down to the camera hardware, the wiring retention, and the Image Processing Module - V (IPMB) software. It adds that "fretting corrosion causes tin oxide formation on the internal camera connector due to [a] thermally-induced micro-movement between the tin-plated contact surfaces," and that the rate of tin oxide accumulation depends on factors such as the temperature and the humidity. It has also traced some of these issues to a problem during the manufacturing process. Ford will begin notifying owners of affected vehicles by mail on October 2. When parts are available, owners will be asked to bring their van or SUV to an authorized dealer so that a technician can replace the rear-view camera. Transit models included in the campaign will also receive a software update. Owners who have already paid to fix the problem can claim a reimbursement until June 30, 2024. This isn't Ford's first rear-view camera-related recall.

Ford paying $750 million just to close plant in Belgium

According to a report from Reuters, Ford is shelling out $750 million in a severance deal that will see the automaker close its facility in Genk, Belgium. The automaker reached this deal with the 4,000 hourly workers employed at the plant last week, which means the company will pay out an average of $187,500 per worker.
Ford is still negotiating with the 300 salaried workers at the factory, which currently produces the Mondeo sedan. All told, Ford expects to lose around $2 billion in Europe thanks in no small part to the region's ongoing economic downturn, and two more plants are scheduled to be shut down in Europe this year. The company will log its $750 million payout under "special items" for this quarter.
As you may recall, Ford took a similar path in the US back in 2009 when the domestic market took a spill. Back then, the company shelled out around $50,000 per employee with at least one year of experience, plus either $25,000 toward a new car or an extra cash payment of $20,000. It would seem the cost of closing plants in Belgium is a much harder pill to swallow than in the States...

NHTSA probes 2014 Ford Edge Sport 22-inch alloy wheels

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2014 Ford Edge Sport for the possibility its 22-inch wheels could break while on the road. This affects an estimated 20,000 examples of the crossover, according to NHTSA. The case that instigated this evaluation was submitted to NHTSA in November 2014. The driver reported that the front, right corner of the vehicle suddenly dipped, and the Edge went into a field. No one was harmed, but upon investigation, the wheel had broken into two pieces, according to The Detroit News. When this happened, this crossover had been driven an estimated 8,500 miles. NHTSA's preliminary evaluations are meant "to assess the scope, frequency, and safety-related consequences of the alleged defect in the subject vehicles." If a problem is discovered during the investigation, this process can lead to a recall. Ford spokesperson Kelli Felker told Autoblog, "We will cooperate with NHTSA on this investigation, as we always do." INVESTIGATION Subject : Wheel Separation Date Investigation Opened: MAY 20, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15020 Component(s): WHEELS All Products Associated with this Investigation Vehicle Make Model Model Year(s) FORD EDGE 2014 Details Manufacturer: Ford Motor Company SUMMARY: On November 29, 2014, ODI received a complaint (ODI No. 10661278) reporting the sudden failure of an original equipment 22-inch alloy wheel rim that failed on a model year 2014 Ford Edge. The right-front corner of the vehicle suddenly dropped while driving, causing the vehicle to drive off the road and into a field. The right-front wheel rim was found to have broken into two pieces. The owner said that there was no prior warning or wheel related problems with the vehicle. The vehicle had been driven approximately 8,500 miles at the time of the incident. A preliminary evaluation has been opened to assess the scope, frequency and safety-related consequences of the alleged defect in the subject vehicles. Related Video: