2014 Ford Escape Se on 2040-cars

Auto blog

Ford issues recalls for Fiesta, Fusion, E-Series, and Lincoln MKZ

Ford has issued two new safety recalls for North America. The first covers certain 2014-15 Ford Fiestas, 2014-16 Ford Fusions, and 2014-16 Lincoln MKZs with doors that might not close properly. The second pertains to 2021 Ford E-Series stripped chassis and cutaway vehicles with a wiring harness that might chaffe and expose important wiring.    Ford is recalling 268,343 Fiesta hatchbacks, Fusion sedans, and MKZ sedans across the United States, Canada, and Mexico, with 248,912 of the affected vehicles located in the U.S. The recall says the "latch pawl spring-tab design" could crack in locations where the temperature gets too hot. If the tab breaks, the door might not shut. Or, worse, the door will shut temporarily and reopen once the vehicle is in motion. As a fix, Ford dealers will remove and replace the side door latches. In a separate recall, Ford is targeting 3,631 2021 E-Series stripped chassis and cutaway vehicles. These vehicles could have frame-mounted wiring harnesses that could deteriorate and break due to rubbing on the frame. If the chaffing wears down the harness, wiring for the fuel, trailer tow, and antilock braking systems could be exposed and damaged. In the worst-case scenario, the damage to the fuel pump wiring could cause the pump to stop working, which could stall the vehicle.  Those with affected E-Series vehicles should bring them in to dealerships for inspection. If there is no damage, technicians will add anti-abrasion tape over the area and "ensure clearance to surrounding components." If the harness is damaged, the wiring will be spliced and fixed, then anti-abrasion tape will be added. Ford also issued a third recall, but it is specifically for the Canadian market. On 54,292 examples of 2006-10 Ford Fusions, 2006-10 Mercury Milans, and 2006-10 Lincoln MKZs, a valve inside the hydraulic control unit might stick open. According to Ford, this could result in a longer brake pedal travel, which could possibly create dangerous situations if the driver is unaware. Dealerships will inspect the control units and replace those that are defective. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. 2021 Ford Bronco and Bronco Sport Leaks!!

The 1965 Ford Mustang could have looked a lot different

The 1965 Ford Mustang is unquestionably an automotive design icon, and nearly every generation of Mustang has some connection to that original car. Because it's such a universally-known vehicle, we were amazed to see all the different designs that were being considered. Head of Ford's archives Ted Ryan recently shared photos of design proposals for the original Mustang on Twitter that he and Jamie Myler found, and we reached out to them to find out more. As Ryan initially noted, the photos were taken on August 19, 1962, and they are proposals for the Ford Mustang. Apparently Ford had committed to doing a Falcon-based youth-oriented car at this point, and it did have plans to launch the car in 1964 for the 1965 model year. But after having little success with early design proposals, the company asked all of its design studios — the Advanced Studio, Lincoln-Mercury Studio and Ford Studio — to submit proposals. With only about two years before the planned launch, Ford was understandably short on time, and it's believed that the studios only had a month to create and present these designs. Lincoln-Mercury design proposal View 8 Photos The majority of the designs, a total of five, came from the Advanced Studio, and part of this was because they already had a couple of concept designs in reserve it could present. Two other models representing three design possibilities came from Lincoln-Mercury, and just one model with two options came from Ford. The Advanced Studio proposals are shown in the gallery at the very top of this article, and the Lincoln-Mercury and Ford proposals are in the gallery directly above this paragraph. The Advanced Studio's most radical design is the one that was clearly related to the Mustang I concept that would be shown later that year with huge wraparound rear glass, turbine-inspired bumpers and enormous side scoops. The other proposals from the studio were more conservative, featuring simple lines, grilles reminiscent of the Falcon, and one even borrowing the jet-thruster-style taillights made famous on the Thunderbird. Lincoln-Mercury had some impressively bold designs, particularly its fastback that had buttresses to extend the shape all the way to the tail. This car had two different side trim possibilities. The other Lincoln-Mercury design was toned down a bit, but had two interesting possibilities for side detailing, as well as some crisp, low-profile tail fins.

2016 Ford F-150 gets propane, CNG conversions

It's a complete mystery if a hybrid Ford F-150 will ever see showrooms, but for buyers looking for an alternative fueling method, Ford has an option ready. For the 2016 model year, the Blue Oval is offering a kit that converts the pickup's 5.0-liter V8 to run on compressed natural gas or propane. The package costs $315 and adds improved valves and valve seats to work with the gaseous fuels. From there, the F-150s go to an upfitter to install the actual fuel tanks, lines, and injectors. Ford estimates this costs $7,500 to $9,500, depending on how much CNG a buyer wants to carry. After the conversion, the tow rating remains the same as running on gasoline, and payload is only reduced by the weight of the system. Ford offered a CNG option on the last-gen F-150's 3.7-liter V6, and sales beat the automaker's forecasts. With the greater grunt available from the V8, the company is expecting the conversion to be even more popular on the new pickups. In times of high fuel prices, CNG models have been a way for fleets to reduce their costs. According to Ford, the average price of natural gas nationwide is $2.11, but it's as low as $1 in some areas. The US Energy Information Administration lists the average for regular gas at $2.57 and diesel at $2.81. Chevrolet and GMC also offer a CNG conversion option on some of their heavy-duty trucks, and Ram does, as well. 2016 F-150 WITH CLASS-EXCLUSIVE COMPRESSED NATURAL GAS, PROPANE CAPABILITY GROWS FORD'S ALTERNATIVE FUEL LEADERSHIP Responding to customer requests, 2016 Ford F-150 with the 5.0-liter V8 engine will offer a gaseous-fuel prep option, making it the only light-duty pickup capable of running on compressed natural gas or propane Ford has sold more than 57,000 vehicles prepped to run on clean, low-cost compressed natural gas and propane – seven times more than all other major U.S. automakers combined – since 2009 Ford has the broadest portfolio of natural gas and propane offerings, including 2016 F-150 and Super Duty trucks, and Transit and Transit Connect vans and wagons Ford Qualified Vehicle Modifiers offer a wide variety of CNG options to help customers find the best, most cost-effective solution to their diverse operating needs Ford, America's truck leader, will offer the 2016 F-150 with an available gaseous-fuel prep package that enables 5.0-liter V8-powered models to run on clean, low-cost compressed natural gas or propane, making Ford the only manufacturer of a CNG/propane-capable half-ton pickup.