2014 Ford Escape Se on 2040-cars

Auto blog

Ford recalls 1.48 million F-150s for transmission, plus other models

Weeks after recalling more than 800,000 F-Series pickup trucks for a fire risk, Ford has issued another separate recall for approximately 1.48 million 2011-2013 F-150s for a transmission fault. The six-speed automatics could unexpectedly downshift into first gear without warning. Ford and Lincoln tangentially issued much smaller recalls for the Mustang, Continental, Nautilus, and Navigator. According to Ford, some 2011-2013 model year F-150 pickups with six-speed automatic transmissions could "experience an intermittent loss of the transmission output speed sensor signal to the powertrain control module." This could potentially cause the trucks to temporarily downshift, which could be dangerous if it occurs while driving. Of the 1.48 million affected trucks, 1.26 million are in the U.S. while 221,000 are in Canada. Thus far, Ford knows of five reported accidents involving the issue. To remedy the problem, owners can take their trucks to dealers to update the power control module software. Ford also issued recalls for about 4,350 2019 Mustangs, Lincoln Nautiluses, and Lincoln Navigators in the U.S. and Canada due to a possible fault with the instrument clusters. Although there have been no reports of accidents, Ford says the instrument panel clusters assemblies might be blank or not turn out when the vehicle is started. Additionally, Ford issued a third recall for 28,200 2017-2019 Lincoln Continentals in the U.S. and Canada. Ford says silicon contamination might build up inside the door latch motor, causing it to malfunction. As a result, the door latch might not always fully engage, and the doors could possibly open unexpectedly. Despite no reports of accidents, Ford will remove and replace door latch assemblies on all doors for those affected by the defect. If any of these apply to a vehicle you own, contact Ford to discuss whether it is included in any of these recalls and have the vehicle checked out at a Ford dealership.

Detroit 3 to implement delayed unified towing standards for 2015

Car buyers have a responsibility to be well-informed consumers. That's not always a very simple task, but some guidelines are self-evident. If you live in a very snowy climate, you generally know a Ford Mustang or Chevrolet Camaro might not be as viable a vehicle choice as an all-wheel drive Explorer or Traverse, for example. If you want a fuel-efficient car, it's generally a good idea to know the difference between a diesel and a hybrid. But what if it's kind of tough to be an informed consumer? What if the information you need is more difficult to come by, or worse, based on different standards for each vehicle? Well, in that case, you might be a truck shopper. For years, customers of light-duty pickups have had to suffer through different ratings of towing capacities for each brand. For 2015 model year trucks, though, that will no longer be a problem. According to Automotive News, General Motors, Ford and Chrysler Group have announced that starting with next year's models, a common standard will be used to measure towing capacity. The Detroit Three will join Toyota, which adopted the Society of Automotive Engineers' so-called SAE J2807 standards way back in 2011. The standard was originally supposed to be in place for MY2013, but concerns that it would lower the overall stated capacity for trucks led Detroit automakers to pass. Ford originally passed, claiming it'd wait until its new F-150 was launched to adopt the new standards, leading GM and Ram to follow suit. Nissan, meanwhile, has said it will adopt the new standards as its vehicles are updated, meaning the company's next-generation Titan should adhere to the same tow ratings as its competitors. While the adoption of SAE J2807 will be helpful for light-duty customers, those interested in bigger trucks will still be left with differing standards. There is no sign of the new tow standards being adopted for the heavy-duty market.

2017 Ford GT looks resplendent in Liquid Silver and will be built in Ontario

You didn't think we'd let an opportunity to capture another high-res image gallery of our favorite vehicle from the North American International Auto Show pass by, now that it's taking center stage in Chicago, did you? Especially since it's now painted in a brand-new hue? Of course not. And so we're happy to present to you the 2017 Ford GT in Liquid Silver, wearing titanium-tinted racing stripes. It may not be as classically American as the show-stopping blue that debuted with the concept in Detroit, but it's beautiful nonetheless. And, in even better news, we hear that the GT has been confirmed for production at Ford's factory in Markham, Ontario, according to our Canadian friends at CTV News. To recap what we know about the Ford GT – besides the fact that we're in mad, mad love with it, of course – it's beautiful, will be powered by a mid-mounted 3.5-liter twin-turbo V6 with "more than 600 horsepower," it's beautiful, it sends all that power to the rear wheels through a seven-speed dual-clutch gearbox, it's beautiful, blends a carbon fiber monocoque and body panels with aluminum subframes, and it's beautiful. We think it's likely headed for endurance-racing competition, as was the original GT40 that is its spiritual grandfather, and we're sure it will look good doing it. Heck, maybe it'll even win at Le Mans. In any case, check it out in high-res glory below, in multiple color schemes, in both images and video. Related Video: Related Gallery Ford GT Concept: Detroit 2015 View 45 Photos Related Gallery Ford GT View 11 Photos Related Gallery 2017 Ford GT: Chicago 2015 View 30 Photos Image Credit: Live photos copyright 2015 Drew Phillips / AOL Design/Style Plants/Manufacturing Chicago Auto Show Ford Coupe Performance Supercars Videos autoblog black