2011 Ford Escape Limited V6 4x4 Certified on 2040-cars

Auto blog

Slew of Ford recalls affect more than a million vehicles

Ford is closing out September with the sad task of alerting owners to five different recalls, two of them camera related. The first is a safety compliance recall affecting 620,246 units of 12 models from the 2020 model year: Edge, Escape, Expedition, Explorer, F-150 and Super Duty, Mustang, Ranger, and Transit, plus the Lincoln Corsair, MKX, and Nautilus. On these vehicles, the circuit board in the rearview camera suffers from insufficient electrical conductivity. The issue can cause the resulting image to not appear or to be distorted, which can lead to an accident while reversing. Ford will begin notifying owners as of November 7 to get their vehicles to dealers for replacement of the rearview camera. The internal Ford reference for this recall is 20C19. The second camera-related issue affects the 2020 and 2021 Ford Explorer, Lincoln Corsair and Lincoln Aviator with the 360-degree camera. Technically, if you own a 2021 Explorer that only has a rearview camera and not a 360-degree camera, neither the above recall nor this one apply to you, but it's probably better safe than sorry here. There are 354,330 crossovers covered by this action. A video output issue could cause the displayed image to cut out, increasing the chances of a reversing accident. Ford will notify dealers starting October 7, the fix being to have a dealer update the Image Processing Module software. The NHTSA campaign number for this recall is 21V735, Ford’s internal reference number is 21S44.  The F-250 and F-350 Super Duty are in for another recalls thanks to potentially improper welds on the front axle's wheel end yoke. A bad weld could alter steering performance, getting the truck to pull left or right, or change the sensitivity of the steering. There are 9,628 affected trucks in the U.S. and 961 in Canada. Dealers will replace the axle assembly if any bad welds are found. Ford's reference number for this is 20S56. The fourth recall affects 38,005 Mustangs in the U.S. and another 2,873 Mustangs in Canada and Mexico from the 2020 model year. In this instance, the brake pedal bracket might fracture during sudden stopping, which can decrease brake pressure and increase the chances of an accident. Ford's internal reference for this recall is 20S52, the fix being to have a dealer replace the brake pedal bracket assembly. Finally, 126,033 units of the 2011 to 2013 Explorer are being recalled over a potential suspension issue.

2015 Ford Mustang already under recall, but just 53 units

Ford has issued a small - but significant - recall for one of its spotlight cars: the 2015 Mustang.
The recall affects just 53 cars, with 50 in the United States and three in Canada. Ford said the passenger side safety belt buckle tension sensor may not have been calibrated properly by the supplier. This could lead to "misclassification" of the passenger seat occupant, and could cause the airbag to deploy improperly.
A Ford spokesperson didn't immediately respond to a request for comment. In a statement, the automaker said it is not aware of any accidents or injuries, and dealers will replace the buckle assembly at no cost to customers. The cars affected were built at Flat Rock Assembly Plant in Michigan from Aug. 18 to Oct. 2.

Ford F-150 production hampered by frame shortage

If anyone has questions about how Ford's new aluminum-bodied F-150 will hold up, it's not buyers. Orders are so strong for the fullsize pickup that competitors General Motors and Ram are discounting their offerings to hold onto market share. It's a shame for the Blue Oval then, that it can't build all the trucks it needs because frame supplier Metalsa isn't delivering enough frames. Neither Ford nor Metalsa has said what the problem is, but Ford employees are at Metalsa's Kentucky plant trying to get it sorted out, Automotive News reports. Overtime shifts at the Dearborn Truck Plant and the Kansas City Assembly Plant have been canceled due to the shortage that's been a problem for at least two months now. The issue is exacerbated by this being the changeover period in production from the old model to the new, which comes with its own issues. That would help explain why even though Dearborn production finished ramping up in January, output in April was down 9.2 percent compared to last year, according to AN. Transaction prices are up for the new truck, but overall F-150 production in Q1 was down 40 percent, and missing product means missing profits. Combined with the production drop for the new Ford Edge, the company's Q1 bottom line was robbed of $1 billion. It isn't clear when the frame issue will be solved, but workers at the plants are ready to run "all-out" when it is. Related Video: News Source: Automotive News - sub. req.Image Credit: Copyright 2015 Drew Phillips / AOL Plants/Manufacturing Ford Truck kansas city assembly plant