08 Leather Upholstery Tint Traction Control 6 Disc Cd Player Tow Hitch on 2040-cars

Auto blog

2020 Ford Super Duty Tremor vs. 2020 Ram 2500 Power Wagon: How they compare on paper

(Editor's Note: Due to inconsistencies in manufacturer reporting methods for ground clearance, an earlier version of this article stated the Ram Power Wagon's "ground clearance" to be 14.3 inches when in fact that is its "running clearance," which is deemed the ground to the lowest point of the truck MINUS the axles. The numbers below now reflect true ground clearance, or the ground to the lowest point of the truck, period. The chart and text have been updated to show both measurements for maximum accuracy and clarity.) For several years, the Ram 2500 Power Wagon has been the unquestioned king of heavy duty off-roaders. But competition is coming, and some of the strongest is from the 2020 Ford Super Duty Tremor. We decided to take a look at these trucks' specs and features to see how they compare in the realm of capability. The raw numbers are below along with some notes on each truck's unique features that go beyond the spec sheet. Off-road capability While both of these trucks boast impressive clambering abilities, each with particular strengths. The Super Duty Tremor earns points for better ground clearance and axle clearance, as well as approach angle. Some of the credit goes to the larger 35-inch tires and a shortened front air dam. On the other hand, the Power Wagon leads the Ford in departure angle, and in the ramp travel index. The latter is largely the result of the Power Wagon's electronically disconnecting sway bars, and for those unfamiliar, the ramp travel index measures articulation by having a truck drive one wheel up a ramp with the other on the ground. The farther the truck goes with the ground wheel in contact with the, well, ground, the better the score and the better the articulation. Numbers aren't everything, though. It's important to look at the equipment each truck offers, and things are closer, here, but the Ram still has an edge. Both feature off-road-friendly solid axles at both ends, but only the Power Wagon has fully locking differentials front and rear. The Tremor has a locking rear differential while the front is a limited-slip differential. The Power Wagon comes standard with a 12,000-pound integrated Warn winch, whereas such a winch is an option on the Tremor. The Tremor has its own unique features, though, including the 35-inch tires rather than the Ram's 33-inchers, and it has Ford's fancy off-road cruise control function called Trail Control. Both trucks have shocks and springs tuned for off-road use.

The 1965 Ford Mustang could have looked a lot different

The 1965 Ford Mustang is unquestionably an automotive design icon, and nearly every generation of Mustang has some connection to that original car. Because it's such a universally-known vehicle, we were amazed to see all the different designs that were being considered. Head of Ford's archives Ted Ryan recently shared photos of design proposals for the original Mustang on Twitter that he and Jamie Myler found, and we reached out to them to find out more. As Ryan initially noted, the photos were taken on August 19, 1962, and they are proposals for the Ford Mustang. Apparently Ford had committed to doing a Falcon-based youth-oriented car at this point, and it did have plans to launch the car in 1964 for the 1965 model year. But after having little success with early design proposals, the company asked all of its design studios — the Advanced Studio, Lincoln-Mercury Studio and Ford Studio — to submit proposals. With only about two years before the planned launch, Ford was understandably short on time, and it's believed that the studios only had a month to create and present these designs. Lincoln-Mercury design proposal View 8 Photos The majority of the designs, a total of five, came from the Advanced Studio, and part of this was because they already had a couple of concept designs in reserve it could present. Two other models representing three design possibilities came from Lincoln-Mercury, and just one model with two options came from Ford. The Advanced Studio proposals are shown in the gallery at the very top of this article, and the Lincoln-Mercury and Ford proposals are in the gallery directly above this paragraph. The Advanced Studio's most radical design is the one that was clearly related to the Mustang I concept that would be shown later that year with huge wraparound rear glass, turbine-inspired bumpers and enormous side scoops. The other proposals from the studio were more conservative, featuring simple lines, grilles reminiscent of the Falcon, and one even borrowing the jet-thruster-style taillights made famous on the Thunderbird. Lincoln-Mercury had some impressively bold designs, particularly its fastback that had buttresses to extend the shape all the way to the tail. This car had two different side trim possibilities. The other Lincoln-Mercury design was toned down a bit, but had two interesting possibilities for side detailing, as well as some crisp, low-profile tail fins.

Ford Mondeo with 1.5-liter EcoBoost debuts in China

Does the car above, posing fancifully in white, look familiar? Well, it should. Although it wears Mondeo badges in the form you see above for the Chinese market - as it does in Europe - the car is basically the same thing sold in the US as the Ford Fusion. Of course, it's what's under that shapely skin that counts.
Ford has chosen the Shanghai Motor Show as the venue with which to unveil its 1.5-liter EcoBoost four-cylinder engine. We'd heard about the engine before, but now we have a few performance estimates to share: 133 kW of power (about 178 horsepower) and 240 Nm of torque (about 177 pound-feet).
Those numbers pretty much confirm previous rumors indicating about 177 in each category, and it's right on par with what Ford's own 1.6-liter EcoBoost produces. Ford is claiming best-in-class fuel economy as well, but no specific figures have yet been provided. In any case, we'll surely have all the data soon enough, as the 1.5-liter mill is destined for the US Fusion in 2014.