No Reserve! 4dr Fwd Suv 3.5l Cd 4whl Abs 4whl Disc Brake 6speed A/t Am/fm Stereo on 2040-cars

Auto blog

Ford F-150, Chevy Silverado, Toyota Tundra flunk IIHS headlight test

The Insurance Institute for Highway Safety put pickup truck headlights to the test and found that the majority of them were equipped with subpar units. The 2017 Honda Ridgeline was the only truck to earn a rating of "good." The large pickup truck test was comprised of the: 2016 to 2017 GMC Sierra, 2017 Nissan Titan, 2016 Ram 1500, 2016 to 2017 Chevrolet Silverado, 2016 to 2017 Ford F-150, and 2016 to 2017 Toyota Tundra. The Sierra's headlights earned a rating of "acceptable," the headlights found on the Titan and Ram 1500 were found to be "marginal," and the ones on the Silverado, F-150, and Tundra were rated as "poor." IIHS claims the F-150 was the most disappointing out of the large pickup trucks as both its halogen and optional LED headlights failed to provide adequate visibility during testing. The Ridgeline (which earned a "good rating"), is usually considered a midsize or small truck, though IIHS included it in the field of large pickups. The headlights on the 2016 Chevrolet Colorado, 2016 GMC Canyon, 2016 Nissan Frontier, and 2016 to 2017 Toyota Tacoma, which made up the small pickup truck group, all earned a rating of "poor." The IIHS claimed the Colorado had the worst headlights of any truck that was tested, as the base vehicle's units were only able to illuminate up to 123 feet in front of the car. The Ridgeline's headlights, for reference, were able to illuminate up to 358 feet in front of the vehicle. To conduct its test, the IIHS utilizes a special tool to measure how far light is projected out of the headlights in different driving situations. The trucks' headlights were tested in a straight line and in corners, while vehicles with high-beam assist were given extra praise. The headlights on the pickup trucks also mimic the testing that was done on small SUVs and cars earlier this year. Next year, automakers will need to fit their vehicles with headlights that earn a rating of either good or acceptable to earn the IIHS Top Safety Pick+. Related Video:

Shelby GT350R offers first mass-produced carbon fiber wheels

In the world of race engineering, reducing total weight is good, but reducing unsprung weight is flippin' fantastic. That's the reason Ford is pushing the envelope in terms of technology for the Shelby GT350R's wheels. Joining the likes of Koenigsegg in the offering, Ford has teamed with Australian outfit Carbon Revolution to produce the CF rollers en masse for the first time. Destined for the hubs of the new Shelby GT350R, the new hoops weigh just 18 pounds each, versus the 33-lbs weight of a similar aluminum wheel. On top of slashing up to 60 pounds in unsprung weight, there's such a reduction in rotational inertia – 40 percent, versus aluminum wheels – that Ford actually has to recalibrate the magnetic ride control system and springs. Thanks to, we're guessing, scenes of crashed Formula One cars disintegrating and spewing shards of carbon fiber all over the track, Ford seems quite keen to do away with the idea that CF is strong, but brittle. The company conducted extensive shock testing, ramming a wheel into a curb at speed. According to the Blue Oval, the lightweight wheel allowed the suspension to respond so quickly that the impact was "greatly diminished," causing the tester to run the experiment again, thinking there'd been a mistake. After recording brake rotor temperatures of 900 degrees Celsius (over 1,650 degrees Fahrenheit, or well past the point that aluminum or magnesium would melt) during testing, Ford and Carbon Revolution actually redesigned the wheels to "a thermal standard more suitable for motorsports," by adding an "incredibly thin, nearly diamond-hard coating that reliably shields the resin from heat." The same process was used to protect engine turbine blades on the Space Shuttle. While the work by Ford and Carbon Revolution should make GT350R customers excited, the work being done here could have serious implications for performance cars in the future. That's the real takeaway here, and is something that should leave fans of all performance vehicles excited.

GM, Ford, Chrysler halt some Michigan operations over natural gas shortage

WASHINGTON - General Motors said late on Wednesday it will temporarily suspend operations at 11 Michigan plants and its Warren Tech Center after a utility made an emergency appeal to users to conserve natural gas during extreme winter cold. Fiat Chrysler Automobiles also said it had canceled a shift on Thursday at both its Warren Truck and Sterling Heights Assembly plants and was considering whether it would need to cancel additional shifts. GM said it had been asked by Consumers Energy, a unit of CMS Energy Corp, to suspend operations to allow the utility to manage supply issues after extreme cold temperatures and a fire at a compressor station. It said workers were told not to report for the shifts at its Orion Assembly, Flint Assembly, Lansing Delta Township Assembly and Lansing Grand River Assembly plants, as well as other stamping and transmission plants on Wednesday evening and early Thursday. GM said it was still assessing when employees could return to work. Workers at its Warren Tech Center were also told to stay home on Thursday. In a video message posted on Facebook, CMS Energy Chief Executive Patricia Poppe said large companies, including Fiat Chrysler, Ford Motor Co and GM, had agreed to "interrupt" production schedules through Friday to tackle the issue prompted by a fire at a Michigan facility and the record-breaking cold. Poppe said the usage cuts by large businesses were not enough, and urged 1.8 million Michigan customers to turn down thermostats as much as they could to cut natural gas use in order to protect critical facilities like hospitals and nursing homes. "I need you to take action right now," she said. Ford said it had also taken steps to reduce energy use at its four Michigan plants supplied by Consumers Energy, but added the situation remained fluid. A spokeswoman said it had reduced heating levels at Livonia Transmission and Van Dyke Transmission, stopped heat treatment processes at Sterling Axle and shut down the paint process at Michigan Assembly. Consumers Energy sent an alert to mobile phones in Michigan asking residents to reduce natural gas use.