Limited, Ecoboost, 1-owner, Clean Carfax on 2040-cars

Auto blog

Ford recalls 650,000 trucks and SUVs for defective wipers

Ford announced earlier this month that it is recalling 652,996 F-Series pickups, Expeditions and Lincoln Navigators produced for the 2020 and 2021 model years to address an issue that may cause their windshield wipers to separate, reducing visibility and leading to potentially hazardous driving conditions.  According to the Blue Oval, one of its suppliers used worn tooling components that resulted in wiper arms being produced with splines that are not tall enough to fully engage the motor pivots they're mounted to, which can cause the connection to strip when the motors are turned on. This could result in the wiper arms not moving at all, or engaging only intermittently.  "Worn wiper arm spline tooling core inserts at the supplier resulted in insufficient spline tooth height, which can cause the arm attachment to strip when used with a certain wiper motors with higher torque," Ford said in its defect report to NHTSA. "Potential symptoms include erratic or slow wipe speed of the driver or passenger wiper arm. An improper functioning wiper arm may potentially result in reduced visibility in certain conditions, which could increase the risk of a crash." Ford says the vehicles were not produced in VIN order, so while not all of the nearly 653,000 vehicles have bad wiper arms, they're all suspect until proven safe. Ford will notify owners of the recall campaign starting in May.  Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Recalls Ford Lincoln Safety Truck SUV

Fiat Panda by M-Sport a one-of-a-kind rally car

English racing and engineering firm M-Sport is probably best known for the Bentley Continental GT3 endurance racer and the Ford Fiesta R5 customer rally car. Since building the first of 294 Fiesta R5 Mk. I cars in 2013, the fleet of pint-sized competitors has won a total of more than 950 races. So when a longstanding M-Sport customer asked the company to do something special with a clapped-out, 1990s-era Fiat Panda that would retain the car's Panda-ness but also make it a stonking rally car, M-Sport decided to combine the Italian with the Anglo-American. The result is the Panda by M-Sport, a widened Panda bodyshell lowered atop a Fiesta R5 chassis and engine. Otherwise known as Panda'monium. Or Pandiesta, if you're tipsy. Just fitting the skinny Fiat over the tube-frame chassis meant widening the Panda's body shell by 14.2 inches; that slick grille is actually made of two Panda grilles to gain the required width. That surgery helps maintain the original Panda's silhouette, but more was needed to slide the Fiesta's wider track underneath. More latitudinal stretch was provided by the box-section wheel arches that, up front, flow into a front bumper that is half snowplow. In the longitudinal direction, the Pandiesta's wheelbase is 12.6 inches longer than that of the stock Panda. The Ford's 1.6-liter EcoBoost four-cylinder lives under the hood. It sends nearly 300 horsepower and 332 pound-feet of torque to four Pirelli P Zeros through a five-speed sequential transmission and two custom differentials. The new rear diffuser and single, central exhaust convey the seriousness of the endeavor. Hand-embossed lettering spells "PANDA 4x4" on the rear hatch in case anyone has questions about this having as much capability as the standard Panda 4x4. The interior is all Fiesta R5 save for the Panda-mimicking instrument panel and the co-driver's footrest. The latter is also inscribed with the word "PANDA." Despite the license plate, there's no question of street legality here, or rather illegality. M-Sport says the Panda'monium is ready to do any special stage on tarmac or gravel. Seems this is also the car that launches a new division for customer creations called MS-SV, which is M-Sport Special Vehicles. You can watch M-Sport owner Malcom Wilson take you on tour of the Panda by M-Sport in the video at top, and check out what the finished product can do on a track here.  Related Video: This content is hosted by a third party.

2017 Ford GT looks resplendent in Liquid Silver and will be built in Ontario

You didn't think we'd let an opportunity to capture another high-res image gallery of our favorite vehicle from the North American International Auto Show pass by, now that it's taking center stage in Chicago, did you? Especially since it's now painted in a brand-new hue? Of course not. And so we're happy to present to you the 2017 Ford GT in Liquid Silver, wearing titanium-tinted racing stripes. It may not be as classically American as the show-stopping blue that debuted with the concept in Detroit, but it's beautiful nonetheless. And, in even better news, we hear that the GT has been confirmed for production at Ford's factory in Markham, Ontario, according to our Canadian friends at CTV News. To recap what we know about the Ford GT – besides the fact that we're in mad, mad love with it, of course – it's beautiful, will be powered by a mid-mounted 3.5-liter twin-turbo V6 with "more than 600 horsepower," it's beautiful, it sends all that power to the rear wheels through a seven-speed dual-clutch gearbox, it's beautiful, blends a carbon fiber monocoque and body panels with aluminum subframes, and it's beautiful. We think it's likely headed for endurance-racing competition, as was the original GT40 that is its spiritual grandfather, and we're sure it will look good doing it. Heck, maybe it'll even win at Le Mans. In any case, check it out in high-res glory below, in multiple color schemes, in both images and video. Related Video: Related Gallery Ford GT Concept: Detroit 2015 View 45 Photos Related Gallery Ford GT View 11 Photos Related Gallery 2017 Ford GT: Chicago 2015 View 30 Photos Image Credit: Live photos copyright 2015 Drew Phillips / AOL Design/Style Plants/Manufacturing Chicago Auto Show Ford Coupe Performance Supercars Videos autoblog black