2014 Ford Edge Se on 2040-cars

Auto blog

2017 Ford F-150 Raptor desert testing heats up

In case there was any doubt, Ford is taking the development of the second-generation SVT Raptor very, very seriously. The Blue Oval recently completed over 1,000 miles of testing in the boiling heat of the American southwest. Apparently, that mileage was accrued over a 66-mile route designed to mimic the torturous terrain encountered by racers in the Baja 1,000 off-road race. The prototypes, which were built from a mix of existing and next-gen Raptor components, were tested with "fast sandy washes, deep-rutted silt beds, steep climbs in deep sand, and slow meticulous crawls through tight trenches." Ford claims the new truck managed to run the circuit 25-percent faster than the current F-150 SVT Raptor, averaging 50 miles per hour while going as fast as 100 mph in stretches. That said, Dearborn didn't release any dedicated times, so it's unclear just how quickly the 66-mile stage was completed. We do know that durability was a big part of the testing. Ford claims each lap was completed by what sounds like a pretty significant jump, with the trucks ascending a steep ramp onto a two-foot plateau and then completing a step-down to level ground. We have to take Ford at its word here, though. "Steep" can mean any number of things, and we've no idea just how fast the trucks were hitting the ramp or how much air they got. Hopefully, the jumps were aggressive enough to prevent future frame issues. Still, Ford boasting about how rough the Raptor's testing is can be taken as a positive sign for fans of the next-generation of SVT's rugged pickup. NEW F-150 RAPTOR WRAPS UP INITIAL DESERT DURABILITY TESTING DEARBORN, Mich., July 7, 2015 – The 2017 F-150 Raptor – Ford's toughest, smartest, most capable off-road truck ever – recently completed more than 1,000 miles of testing in the southwestern United States. Over 1,028 miles of desert trail designed to parallel the Baja race course in Mexico, the 66-mile route featured a wide range of surfaces including fast sandy washes, deep-rutted silt beds, steep climbs in deep sand, and slow meticulous crawls through tight trenches. The truck topped speeds of 100 mph in places, slowing to 10 mph in others, for an average speed of approximately 50 mph. The 2017 Raptor is 25 percent faster than the current truck based on lap times. At the end of each lap, the new Raptor completed a tabletop jump consisting of a steep ramp up to a two-foot plateau, then a step-off back to level ground.

All eyes on Detroit as automakers prepare for slow, careful reopening of plants

DETROIT — The U.S. factories that make Fords, Chevys and Jeeps are coming back to life this week as workers install new safety equipment and wake up machines ahead of the high-stakes restart the Detroit automakers plan to launch on Monday. Ford, General Motors and Fiat Chrysler Automobiles all plan to reopen North American factories on May 18. The reopening of the U.S. auto sector will be a closely watched test of whether workers across a range of industries can return to factories in large numbers without a resurgence of COVID-19 infections. How well the automakers do will be significant for the U.S. economy, as nearly 1 million workers are employed in the sector. Executives at Ford and GM said separately this week the companies have not recorded any cases of COVID-19 transmission in plants outside the United States since adopting new safety protocols. Those procedures include mandatory face masks, separation of workers on assembly lines, frequent cleaning of work areas and requirements that workers pass through temperature monitors and report any symptoms before entering a plant. The Detroit Three have taken unprecedented steps to share information about coronavirus safety practices and develop a common set of workplace standards for their restarts, working with the United Auto Workers union, executives said. "We thought it was critical that we did it together," Ford manufacturing and labor chief Gary Johnson told Reuters. "We've never done this as an industry." The Detroit automakers will restart U.S. plants without regular testing of workers, because they do not have access to sufficient testing capacity, executives and UAW officials said. They will test workers who report COVID-19 symptoms or have fevers discovered by temperature scanners installed at factory entrances. "We have to continue to push for this testing," United Auto Workers union Vice President Cindy Estrada told Reuters on Wednesday. "Unless we have testing weekly to keep sick people out of the plant there is always a risk." Adopting new safety practices is just part of the work the companies must do to reopen after an extraordinary shutdown that has lasted two months.   Wave zero At Ford, workers going in to ready factories are part of what Chief Operating Officer Jim Farley calls "wave zero." The work of wave zero employees "is really important for success of the startup," he said in an interview.

Recharge Wrap-up: BMW tests AdBlue pumps, Drivr is a Tesla taxi service

BMW is testing AdBlue pumps in Germany. AdBlue fluid is used to remove NOx from diesel exhaust, and it is stored in its own tank within the vehicle. Filling AdBlue is easy enough for drivers to do it themselves, and with the proliferation of diesel vehicles in Europe, a pump filling system could make more sense than using the current hand-held containers. BMW is testing AdBlue pumps at three fueling stations in Munich and Berlin to help develop further AdBlue dispenser technology. Read more at Green Car Congress. Drivr Green Personal Transportation is a Tesla taxi service in Cincinnati. Two former employees of Tesla Motors founded the startup, which bills itself alongside ride-hailing services like Uber and Lyft. Customers book a ride online, and are picked up by a Tesla Model S. The ride costs $2.50 per mile with a $15 minimum. Drivr currently operates three cars with seven drivers, with plans to lease another 10 Teslas and employ up to 30 drivers. The service will also be expanding to Denver soon, according to the website. Learn more at the Drivr website, or read more at Clean Technica. Ford is opening a research and development facility in Silicon Valley. The Ford Research & Innovation Center, which will be located less than three miles from Tesla Motors headquarters in Palo Alto, California, is expected to be one of the automotive industry's largest R&D facilities. "We're driving to be both a product and a mobility company, and ultimately to change the way the world moves," says Ford CEO Mark Fields. Read more at Automotive News. Law firms advising Fisker Automotive have been denied a $2.50-million fee enhancement in the car company's bankruptcy. Brown Rudnick LLP and Saul Ewing LLP were denied the extra fees, as a Delaware bankruptcy judge ruled there is "no evidence" that the firms provided anything more than what they originally expected. In denying the fee enhancement, the judge cited a "very high bar" for such awards. Read more at Law360. Featured Gallery BMW Tests AdBlue Pumps in Germany Related Gallery Tesla Factory News Source: Green Car Congress, BMW, Clean Technica, Drivr, Automotive News Green BMW Fisker Ford Tesla Transportation Alternatives Diesel Vehicles Electric recharge wrapup