2012 Ford Edge Sel on 2040-cars

Auto blog

NHTSA investigating 250k F-150s for possible power brake failure

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2011-2012 Ford F-150 with the 3.5-liter EcoBoost V6 because of potential failure of the power braking assist. If a recall is required, it could affect an estimated 250,000 of the trucks. This investigation is prompted by NHTSA receiving 32 complaints about the electric vacuum assist pump allegedly failing in these trucks, which then causes the power braking assist to stop working. Drivers claim having no warning beforehand. There are also two reports of crashes that are purportedly linked to the problem, but the government agency lists no injuries. According to NHTSA, the issue may be getting worse because 60 percent of these allegations are from the past nine months. A preliminary evaluation doesn't necessarily lead to a recall, though. NHTSA uses them "to assess the cause, scope and frequency of the alleged defect." Ford spokesperson Kelli Felker tells Autoblog: "We will cooperate with NHTSA on this investigation, as we always do." Related Video: INVESTIGATION Subject : Brake Vacuum Pump Failure Date Investigation Opened: JUN 22, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15026 Component(s): SERVICE BRAKES, ELECTRIC , SERVICE BRAKES, HYDRAULIC All Products Associated with this Investigation Vehicle Make Model Model Year(s) FORD F-150 2011-2012 Details Manufacturer: Ford Motor Company SUMMARY: The Office of Defects Investigation (ODI) has identified 32 complaints alleging electric vacuum assist pump failures resulting in loss of brake power assist and increased brake pedal effort in model year (MY) 2011-2012 Ford F-150 full-size pickup trucks equipped with 3.5L GTDI engine. None of the complaints reported any warning indicators to alert the driver of brake power assist loss or the potential of increased stopping distance. Two reports alleged crashes due to increased brake pedal effort required to stop or slow the vehicle. The complaints show an apparent increasing trend, with approximately 60 percent of complaints received within the past nine months. A Preliminary Evaluation has been opened to assess the cause, scope and frequency of the alleged defect.

Ford considering bringing Ranger pickup back to the US

When Ford announced last month that it was moving Focus and C-Max production out of the Michigan Assembly Plant after 2018, it said that it was looking for other products to build at the facility and such proposals would be part of discussions with the UAW on a new contract. According to a report in The Detroit News, one of those vehicles could be a new Ford Ranger midsize pickup. We're a long way out from a decision being made, and both the UAW and Ford's board of directors would have to sign on, but the report says it's in the air. The last Ranger was built in the now-shuttered Twin Cities Assembly Plant in St. Paul, MN, in December 2011. After 29 years on the market, slow sales for the truck itself and the midsize truck segment doomed it, annual Ranger sales numbers having dropped from a peak of roughly 350,000 in 1999 to just 70,832 in 2011. The midsized truck market is still coming out of its own doldrums, with 211,797 sold through July 2015, the Toyota Tacoma accounting for 50.1 percent of that, followed by the Chevrolet Colorado, Nissan Frontier, and GMC Canyon. Even with analyst predictions that the market will grow to 300,000 in the near future, compare that to the fullsize truck market that has already sold 1.2 million units this year. The Wayne plant has built trucks before over its 57-year history, but it would likely need more than just the Ranger to keep it afloat; it builds five vehicles now, pumping out 265,000 units last year. According to Bloomberg, this could also mean the possible return of the Bronco. If we do get a new Ranger, it probably won't be anything like the old Ranger. Ford still makes it for 180 global markets, but if you've seen one you know it's a different animal. The wheelbase on the 2015 Ranger sold in Australia is fifteen inches longer than our 2012 Regular Cab model, about an inch longer than the 2012 Supercab. It has a bulkier design, weighs 700 pounds more, and can be had in numerous configurations we didn't get like a five-seat Dual Cab. A new version for us would also need updating for US regulations, and Ford would want to make sure it could be built with price and size separation from the fullsize F-Series.

V8-powered 2022 Ford F-150 Raptor R spied testing alongside Ram TRX

Spy photographers captured Ford engineers testing what appears to be a 2022 F-150 Raptor R alongside a Ram TRX this week, giving us a sneak preview of the first major battle in the coming war for super-pickup dominance.  Ford has remained tight-lipped about the Raptor R's performance specs. We know only that it will be powered by a V8 (likely a variant of the 760-horsepower, supercharged 5.2-liter unit from the Ford Mustang Shelby GT500), and that it's due to break cover some time later this year. Given that the 702-horsepower Ram TRX will be the Raptor R's only competition (and pretty much the only reason it exists in the first place), Ford's decision to benchmark the fast Ram is a bit of a no-brainer.  The Blue Oval's performance engineers have years of practice when it comes to building high-performance off-road trucks, so despite Ram's first-strike advantage and Hellcat trump card, the TRX might actually be the underdog in this fight. Why? Well, based on what we've seen of the EcoBoost-powered 2021 Raptor so far, it should weigh at least 500-600 pounds less than the TRX, and while we expect that gap to shrink with the addition of the bigger engine, it's likely that it will still favor Ford, and perhaps significantly.  While the larger, supercharged V8 will certainly weigh more than the EcoBoost V6, it's still an all-aluminum engine (all SRT motors are based on cast-iron blocks) and Ford still has the advantage of its lightweight body panels. There will likely be more to the Raptor R's chassis modifications than a new set of engine mounting points, since the existing Raptor was not engineered to handle an 800-horsepower engine, but even with the chassis modifications necessary to handle that power, we expect the Raptor R to be the featherweight of the two.  Since Ford plans to get the Raptor R into production for the 2022 model year, we shouldn't have to wait much longer to find out just exactly how it shapes up against Ram's big dinosaur. Stay tuned. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.