2009 Ford Edge Sel 2wd **private Seller** 69,xxx Miles! on 2040-cars

Auto blog

Shelby GT350R offers first mass-produced carbon fiber wheels

In the world of race engineering, reducing total weight is good, but reducing unsprung weight is flippin' fantastic. That's the reason Ford is pushing the envelope in terms of technology for the Shelby GT350R's wheels. Joining the likes of Koenigsegg in the offering, Ford has teamed with Australian outfit Carbon Revolution to produce the CF rollers en masse for the first time. Destined for the hubs of the new Shelby GT350R, the new hoops weigh just 18 pounds each, versus the 33-lbs weight of a similar aluminum wheel. On top of slashing up to 60 pounds in unsprung weight, there's such a reduction in rotational inertia – 40 percent, versus aluminum wheels – that Ford actually has to recalibrate the magnetic ride control system and springs. Thanks to, we're guessing, scenes of crashed Formula One cars disintegrating and spewing shards of carbon fiber all over the track, Ford seems quite keen to do away with the idea that CF is strong, but brittle. The company conducted extensive shock testing, ramming a wheel into a curb at speed. According to the Blue Oval, the lightweight wheel allowed the suspension to respond so quickly that the impact was "greatly diminished," causing the tester to run the experiment again, thinking there'd been a mistake. After recording brake rotor temperatures of 900 degrees Celsius (over 1,650 degrees Fahrenheit, or well past the point that aluminum or magnesium would melt) during testing, Ford and Carbon Revolution actually redesigned the wheels to "a thermal standard more suitable for motorsports," by adding an "incredibly thin, nearly diamond-hard coating that reliably shields the resin from heat." The same process was used to protect engine turbine blades on the Space Shuttle. While the work by Ford and Carbon Revolution should make GT350R customers excited, the work being done here could have serious implications for performance cars in the future. That's the real takeaway here, and is something that should leave fans of all performance vehicles excited.

2015 Saleen 302 Black Label Mustang unveiled with 730 horsepower

The last time Saleen made these pages it was to report that the firm was out of money. However, just before that announcement, the tuning specialist told us about the three Saleen 302 Mustangs it was developing at three levels - White Label, Yellow Label and Black Label, with those latter two trims to put out 640 horsepower and 565 pound-feet of torque. Well, the Black Label is here - don't let the California Sunset paint fool you - and it's more powerful than planned, with 730 hp and 600 lb-ft blasted out of a 5.0-liter Coyote V8 hooked up to a twin-screw supercharger. Saleen says it's the most powerful, refined, and advanced Mustang it has ever built. Keeping all that power on the road is the increase in downforce that comes from a body that's been extended one inch in front and two inches in the back, and the wing suspended over the decklid. The stock suspension is refitted with Saleen S4 springs, shocks, swaybars and bushings, and the 20-inch wheels on 275-section rubber hide 15-inch dimpled rotors. The interior gets the requisite frills in leather and contrasting stitches, as well as new gauges and badging. It'll take $73,214 to open the door, but just $2,015 to put down a deposit. For more info, check out the press release below. Related Video: 2015 Saleen 302 Black Label Mustang March 15, 2015 -- Earlier this year, Saleen Automotive released their 2015 White and Yellow Label 302 Mustangs to much fanfare. To round out their fleet, Saleen pulled out all the stops and developed one of the best Mustangs to date. This car is set to change the way pony cars are looked at from here on out. At a one-of-a-kind event in Downtown LA, Saleen raised the curtain on the latest pony car out of their Corona, CA headquarters. "Since I started building cars in 1984 my goal has always been to go above and beyond where anybody has been before", said Steve Saleen. "This will by far be the most refined and advanced Mustang we have built to date." With over 30 years of experience in both racing and manufacturing vehicles, it was only a matter of time before Saleen built a Mustang as comprehensive and technologically advanced as the 2015 302 Black Label. Power Saleen combined the reliability and potency of the 5.0L Coyote motor with a twin-screw supercharger. The pair produces the most power from a production Mustang yet at 730 horsepower and 600 lb-ft of torque on 91 octane gas.

Daimler consulting with Ford about 3-cylinder engines

Soon enough, Ford will offer its 1.0-liter EcoBoost three-cylinder engine under the hood of the Fiesta here in the United States, building on the success of the small powerplant overseas. In fact, this success has caused other automakers to take notice, and according to Automotive News Europe, Daimler is now talking to Ford about this engine for use in its own products.
In other markets, Ford offers the 1.0-liter mill under the hood of the Focus (we had the chance to sample this package on our home turf), as well as the B-Max MPV. For this new collaboration, Daimler would use the turbo-three in the next-generation Smart ForTwo, as well as the Renault Twingo, which the German automaker will be collaborating on as part of its alliance with Renault-Nissan. Speaking to AN, a Mercedes-Benz engineer called the 1.0-liter mill an "interesting and impressive engine."
In exchange for details about the EcoBoost inline-three, Daimler will supply Ford with information regarding its Euro6 stratified lean-burn gasoline engine, which is found in the new E-Class sedan.