2003 Ford E-350 Base Extended Cargo Van 2-door 7.3l on 2040-cars

Auto blog

Ford reveals 345-horsepower output for new Focus RS [w/video]

When Ford revealed the new Focus RS at the Geneva Motor Show, it promised it would deliver "well in excess of 315 horsepower." It didn't say exactly how much that would come to, but now it has. On the eve of its dynamic debut at the hands of Ken Block at the Goodwood Festival of Speed, Ford has confirmed that its new hot hatch will pack 350 metric horsepower. Those reaching for their calculators will find that works out to 345 horsepower by our standards. The power output is backed up by 324 pound-feet of torque, capable of being boosted up to 347 for up to fifteen seconds at a time. Those figures come from a retuned version of the same 2.3-liter EcoBoost turbo four as the one available in the Mustang, but produces over ten percent more power thanks to a new turbocharger, upgraded intake and exhaust, and a larger radiator. All that muscle will be channeled to all four wheels through Ford Performance's new all-wheel drive system with dynamic torque vectoring, launch control, and selectable drive modes, including a Drift Mode that (as you can see from the video below) allows the hot hatch to get more than a little sideways. Ford still isn't saying what those specs will translate to in terms of measurable performance figures, but as far as output goes, things are looking pretty good. The 30th Ford RS model already packs more power and torque than the new Honda Civic Type R (306 hp, 295 lb-ft), Volkswagen Golf R (292 hp, 280 lb-ft), Subaru WRX STI (305 hp, 290 lb-ft) or the Nurburgring-conquering Renault Megane 275 Trophy-R (271 hp, 266 lb-ft) and Seat Leon Cupra (276 hp, 258 lb-ft). It even respectably holds its own against the more upscale BMW M235i (320 hp, 330 lb-ft), Mercedes A45/CLA45 AMG (355 hp, 332 lb-ft), and Audi RS3 (362 hp, 343 lb-ft). Whether it'll outshine them all in real-world conditions remains to be seen, but we're looking forward to finding out whenever Ford deems fit to drops those performance stats on us. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.