2001 Ford E-250 Cargo Van on 2040-cars

Auto blog

Ford dissects the heart of the 2015 Mustang, its engine range

Happy Mustang Day. Are you tired of hearing about the 2015 Ford Mustang yet? No? Good, here's a bunch of mechanical data on Ford's sixth-gen muscle car, along with cutaways of the GT's 5.0-liter V8 and the new 2.3-liter, EcoBoost four-cylinder shown above. We also have a smattering of info on the Stang's updated transmissions and an exploded-parts-diagram view of its all-new independent rear suspension.
Ford is set to make waves offering the Mustang with a turbo for the firs time since the small-volume SVO of the 1980s. Displacing 2.3 liters, the engine's twin-scroll turbo should help the four-cylinder turn out a projected 305 horsepower and 300 pound-feet of torque, while also returning the best fuel economy in the Mustang's engine lineup. As we said in our Deep Dive, the EcoBoost will be slotted in as a premium engine, above the 3.7-liter V6 but below the 5.0-liter V8.
Speaking of that high-revving eight-cylinder, it's receiving a new cylinder head with high-flow ports. The intake and exhaust valves are larger and the cams have been replaced, among other tweaks. It should rev even higher thanks to a rebalanced crankshaft and forged connecting rods. Ford is still claiming a projected 420 hp and 390 lb-ft, although as many of the changes for the 2015's V8 come from the 2013 Boss 302, we're going to assume there's some sandbagging at work.

2020 Ford Explorer, Lincoln Aviator reportedly facing numerous QC issues

A lengthy report in the Detroit Free Press delves into a range of quality control issues confronting the 2020 Ford Explorer and its luxury platform sibling, the 2020 Lincoln Aviator. Freep says it's been following the issue for two months, tapping various unnamed sources for information on the automaker's unorthodox route to resolution. Seems the problem is Explorers and Aviators leaving the production line at the Chicago Assembly Plant with flaws in areas like the chassis, transmission and suspension, said vehicles trucked to Ford's Flat Rock Assembly Plant (FRAP) outside of Detroit for repair. The estimates range from 10,000 to 18,000 vehicles affected, numbers so high that Ford has sought help from Roush Engineering in nearby Allen Park, and brought workers and managers from other plants in the Midwest to FRAP to get vehicles repaired and shipped to dealers. Ford hasn't shared the nature of the problems with anyone outside the company, including dealers and customers. Freep's sources are said to include workers who have provided photos of certain vehicles and of tents used to house parts at the FRAP repair site. The Explorer chassis allegedly has an unidentified problem that engineers are using X-rays to diagnose, and the transmission is having problems sensing when it's in park or going into park. Both the Explorer and Aviator have come off the line with HVAC units that only blow hot air. And the Aviator's height-adjustable suspension enters failure mode for unknown reasons. These come on top of quotidian mishaps common to every new vehicle, but that are meant to be sorted in pre-production, like missing emblems and trim pieces. They also come on top of a recall in early August issued for the Explorer and Aviator concerning the instrument cluster and parking brake, and another at the end of August over rear seatbacks that could collapse in a crash. An automaker spokesperson told Freep, "Making updates to preproduction models based on all-new platforms as they roll off the assembly line – is standard industry practice." Except these aren't pre-production, these are early production vehicles that paying customers and dealers are waiting for, and some of the affected vehicles have been pulled off dealer lots. Dealers say they are fine waiting for the trucks to get sorted out, and they'd rather have Ford fix the problems before the SUVs go to customers.

J.D. Power study identifies top seats for your tush

File under News your fanny can use: The seating systems in the Ford Escape and Edge, the Audi A3, Chevrolet Cruze, Kia Cadenza, Porsche Cayenne and Toyota Tundra received top marks in a new J.D. Power study on seating and seat belt quality and satisfaction. The J.D. Power 2017 Seat Quality and Satisfaction Study asked more than 77,000 new owners and lessees of 2017 model-year cars and light trucks to rate their vehicle's seats and seat belts within the first 90 days of taking ownership. The survey is broken up into seven vehicle segments and scored on total seat problems per 100 within each segment, with awards presented to the seating system supplier. Canadian auto supplier Magna won three of seven first-place awards for its seating systems in the A3, Escape and Edge. Ireland-based Adient got top marks for its seats in the Cadenza and Cayenne. Lear Corp. won for the Cruze, and Avanzar Interior Technologies scored highest for seats in the Tundra. J.D. Power says its study is intended for automakers and suppliers with quality and satisfaction information to be used in developing and marketing seating systems. "But the results are just as interesting to a consumer audience," the company says. "After all, some drivers spend a considerable amount of time behind the wheel, and it's helpful to know which vehicles offer the most comfortable seats for those long commutes." Ain't that the truth. Ford was the only automaker whose seat systems, both manufactured by Magna, received top honors in two segments: the Escape for mass-market compact SUV and the Edge for mass-market midsize/large SUV. J.D. Power says it used 22 attributes to measure seat quality, three measures of seat belt quality and 12 to measure satisfaction. Awards were presented to the seating suppliers. Related Video: Image Credit: Audi Auto News Design/Style Audi Chevrolet Ford Kia Porsche Toyota Safety JD Power seats