2013 Ford E-350 Super Duty E350 Super Duty Van on 2040-cars

Auto blog

280-bhp Elemental RP1 revealed, now with bike-engine option

The Elemental RP1 might be Britain's next big boutique roadster success story. Designed by a team with Formula One experience, it aims to mix road car drivability with racecar performance in a single, adaptable package weighing less than 1,000 pounds. It was first previewed a few weeks ago, but the secrecy has finally disappeared due to its upcoming debut at the Goodwood Festival of Speed. The backbone of the RP1 is a carbon fiber and aluminum tub onto which the front and rear subframes bolt on. Inside, it has an F1-like, feet-up driving position that allows for additional underfloor aerodynamic aids to improve downforce. Despite its hardcore nature, Elemental says that it wants the car to be very user friendly. Buyers should be able to drive the RP1 to the track, adjust it with some wrenches, go racing and drive it home. The company even claims the storage areas to either side of the engine offer enough room for a helmet and other racing gear. Hopefully, buyers don't crash, though, otherwise they might be stuck. Elemental is adding two more engine options for the RP1, as well. In addition to the previously announced tuned Ford 2.0-liter EcoBoost with 280 horsepower, buyers can also choose a upgraded version of Ford's three-cylinder 1.0-liter EcoBoost or a model aimed at pure track use with a 999cc Honda Fireblade motorcycle engine. The 2.0-liter uses a six-speed sequential manual gearbox, and a limited-slip differential and alternate gear sets are available as additional options. The first RP1s built will be pure racers for the 2015 season, and the first road cars will follow in the early summer of next year. Pricing isn't set yet, but scroll down for more details and full specs of Britain's latest feather light car for road and track. Introducing the Elemental Rp1 Press Release: 23/6/2014 British sports car manufacturer, Elemental Motor Company Limited, today released further details of their new and innovative, road legal track car, the Rp1. The Rp1 is an open top, road legal, mid engined sports car that incorporates state of the art road and race car technologies. Designed, Engineered and Built by a team with decades of experience in the Formula One and Supercar industries, it brings the concept of a road legal track car firmly into the 21st Century. The Rp1 will be revealed to the public for the first time, this weekend, at the 2014 Goodwood Festival of Speed, where it will located in the Moving Motor Show tent "First Glance" display.

Here's what the UAW will be angling for in next year's contract negotiations

The United Auto Workers union is about to enter a new round of negotiations with the Detroit Three automakers, and this time, the focus is on the end of the two-tier wage system. Introduced in 2007, the two-tier wage system was enacted to allow General Motors, Ford and Chrysler to categorize its hourly employees under two categories: Tier 1 for veteran employees with full rights and benefits, and Tier 2 for short-term or entry-level employees compensated under a different schedule. The idea was that the system would permit the automakers to invest more in their plants and hire new employees as part of their respective recovery plans without being saddled with all the costs associated with hiring full-time employees. Now that the automakers are (more or less) back on their proverbial feet, however, the UAW wants to see an end to the two-tier system, and will likely make that a center-point of its negotiations next year to replace the current arrangement that is scheduled to end in September 2015. Not all members of the UAW will necessarily be interested in ending the two-tier system, however. According to The Detroit News, some Tier 1 workers may be more interested in negotiating a raise in their hourly rate – something which they haven't received in almost a decade. Tier 2 workers, meanwhile, may be more motivated to keep the tiered system in place, as their arrangement includes provisions for profit-sharing payments that have seen the automakers pay out billions to so-called short-term employees in lump-sum payments. Reconciling the two competing demands from two categories of union members and presenting a united front in negotiations may prove the biggest challenge for the UAW's new president, Dennis Williams. And with the right to strike – something which was suspended during the last round of negotiations in 2011 – the union has a bigger bargaining chip in its pocket.

Slew of Ford recalls affect more than a million vehicles

Ford is closing out September with the sad task of alerting owners to five different recalls, two of them camera related. The first is a safety compliance recall affecting 620,246 units of 12 models from the 2020 model year: Edge, Escape, Expedition, Explorer, F-150 and Super Duty, Mustang, Ranger, and Transit, plus the Lincoln Corsair, MKX, and Nautilus. On these vehicles, the circuit board in the rearview camera suffers from insufficient electrical conductivity. The issue can cause the resulting image to not appear or to be distorted, which can lead to an accident while reversing. Ford will begin notifying owners as of November 7 to get their vehicles to dealers for replacement of the rearview camera. The internal Ford reference for this recall is 20C19. The second camera-related issue affects the 2020 and 2021 Ford Explorer, Lincoln Corsair and Lincoln Aviator with the 360-degree camera. Technically, if you own a 2021 Explorer that only has a rearview camera and not a 360-degree camera, neither the above recall nor this one apply to you, but it's probably better safe than sorry here. There are 354,330 crossovers covered by this action. A video output issue could cause the displayed image to cut out, increasing the chances of a reversing accident. Ford will notify dealers starting October 7, the fix being to have a dealer update the Image Processing Module software. The NHTSA campaign number for this recall is 21V735, Ford’s internal reference number is 21S44.  The F-250 and F-350 Super Duty are in for another recalls thanks to potentially improper welds on the front axle's wheel end yoke. A bad weld could alter steering performance, getting the truck to pull left or right, or change the sensitivity of the steering. There are 9,628 affected trucks in the U.S. and 961 in Canada. Dealers will replace the axle assembly if any bad welds are found. Ford's reference number for this is 20S56. The fourth recall affects 38,005 Mustangs in the U.S. and another 2,873 Mustangs in Canada and Mexico from the 2020 model year. In this instance, the brake pedal bracket might fracture during sudden stopping, which can decrease brake pressure and increase the chances of an accident. Ford's internal reference for this recall is 20S52, the fix being to have a dealer replace the brake pedal bracket assembly. Finally, 126,033 units of the 2011 to 2013 Explorer are being recalled over a potential suspension issue.