1939 Ford Deluxe Frame Off Restoration 4dr Sedan on 2040-cars

Auto blog

NHTSA closes investigations into Ford Taurus, Hyundai Santa Fe

Ford and Hyundai are out from under the scrutinizing eyes of the National Highway Traffic Safety Administration after the government agency said it was closing investigations against both automakers over vehicle safety concerns.
Ford was being investigated for reported damaged speed control cables on Ford Taurus (shown above) and Mercury Sable models, both built between 2000 and 2003. Vehicles with the company's Duratec engines allegedly failed to allow owners to brake as expected. Owners lodged 100 complaints and were involved in five accidents, according to NHTSA records. The American automaker responded to the reports, and on June 21 of this year, said that it would inspect and repair all affected vehicles, regardless of the mileage.
Hyundai was under investigation for a reported loose fastener on the steering shaft of its 2011 Santa Fe (shown in the gallery below). After NHTSA launched its inquiry, the Korean automaker responded with its own investigation that yielded four affected vehicles. Following the inspection of 680 vehicles at its assembly plant, Hyundai said the issue was due to employee error and that no further defects have been found.

Ford recalls 125,000 Maverick, Escape, Corsair hybrids over fire risk

Ford is recalling more than 125,000 Maverick, Escape and Lincoln Corsair hybrids produced for the 2020-2023 model years to address a fire risk associated with failure of their internal combustion engines, which Ford says is happening with undue frequency. In the event of an engine block breach, oil and fuel vapors may collect under hood in places that would make them prone to ignition, meaning that an engine failure can do more than leave owners stranded.  "Isolated engine manufacturing issues have resulted in 2.5L HEV/PHEV engine failures involving engine block or oil pan breach," Ford said in its defect report to NHTSA. "In the event of an engine block or oil pan breach, the HEV/PHEV system continues to propel the vehicle allowing the customer to continue to drive the vehicle. As the customer continues to drive after a block breach, oil and/or fuel vapor continues to be expelled and accumulates near ignition sources, primarily expected to be the exhaust system." Per Ford, the "manufacturing issues" include poor machining of the engine crankshaft and contamination of engine block mating surfaces during assembly. The issue has been fixed in production, but 2.5-liter engines that escaped the factory with defects could be ticking time bombs. Ford's solution is to re-work the underhood components that allow combustible liquids and vapors near ignition sources. This way, the cars are better protected against immolation regardless of the circumstances. Signs of failure will be obvious, Ford says. Loud clanging or booming noises, a loss of power and smoke are all immediate signs that the customer should exit the roadway as safely and quickly as possible and shut the car down.  Owners should expect to receive notifications by the end of June or early July. They should begin circulating by mid-month. All remediation will be handled for the customer free of charge by their Ford dealerships.  Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. 2020 Ford Escape Hybrid and Plug-In Hybrid

NHTSA closes Ford F-Series Super Duty steering probe without recall

The National Highway Traffic Safety Administration's investigation into 2008 Ford F-250 and F-350 Super Duty pickups, which was originally opened last year, has now ended without a recall. NHTSA was looking into steering failures on some 336,000 trucks.
The issue rested with the steering gear - NHTSA received five complaints of failures - which was redesigned in 2005. According to the report on the matter, investigators "found evidence of broken sector shaft gear teeth and piston damage consistent with incidents of single event overload."
NHTSA investigators, however, "found no evidence of fatigue or material property defects in any of the fractures. Analysis of complaint rates by vehicle build month showed no patterns indicating potential manufacturing quality issues and no difference before and after Ford introduced design changes to the input shaft and sector shaft seals in July 2007 to address potential leak concerns," according to the report, obtained by The Detroit News.