Find or Sell Used Cars, Trucks, and SUVs in USA

2009 Ford Crown Victoria Lx With Police Interceptor Package on 2040-cars

Year:2009 Mileage:83440 Color: Black /
 Gray
Location:

Paso Robles, California, United States

Paso Robles, California, United States
Advertising:
Transmission:Automatic
Body Type:Sedan
Vehicle Title:Clear
Engine:4.6L 281Cu. In. V8 FLEX SOHC Naturally Aspirated
Fuel Type:FLEX
For Sale By:Private Seller
Condition:
Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ...
VIN (Vehicle Identification Number)
: 2FAHP71VX9X108146
Year: 2009
Make: Ford
Model: Crown Victoria
Warranty: Vehicle does NOT have an existing warranty
Trim: Police Interceptor Sedan 4-Door
Safety Features: Anti-Lock Brakes, Driver Airbag, Passenger Airbag
Drive Type: RWD
Power Options: Power Driver's Seat, Air Conditioning, Cruise Control, Power Locks, Power Windows
Mileage: 83,440
Exterior Color: Black
Interior Color: Gray
Number of Doors: 4
Number of Cylinders: 8

I have a 2009 Ford Crown Victoria LX Police Interceptor with 83,440 miles on it for sale. Because it is a retired police cruiser, they have exempted the miles so the title is "branded" with true miles unknown (exempt). The odometer still works fine though, and as far as I and the previous owner can tell, the miles appear to be actual. It's in great shape inside and out and is ready for work. Along with all of the normal Crown Victoria LX equipment like power driver's seat, power adjustable foot pedals, power windows, power door locks, power steering, cruise control, tilt steering wheel, air conditioning, AM/FM stereo, dual air bags, traction control, and 4-wheel ABS it also comes with the special police interceptor turning and equipment. Some of the items that the package includes are upgraded air intake box, upgraded brakes, external oil-to-engine-coolant oil cooler, heavy duty built transmission, and "severe duty" shock absorbers just to name a few things. The working spotlights can be removed if desired.

Auto Services in California

Zube`s Import Auto Sales ★★★★★

New Car Dealers, Used Car Dealers, Wholesale Used Car Dealers
Address: 225 Tank Farm Rd Ste B2, Shell-Beach
Phone: (805) 541-9823

Yosemite Machine ★★★★★

Auto Repair & Service, Automobile Machine Shop, Engine Rebuilding & Exchange
Address: 229 Empire Ave, Ceres
Phone: (209) 578-5654

Woodland Smog ★★★★★

Auto Repair & Service, Automobile Inspection Stations & Services, Gas Stations
Address: 208 Main St, Knights-Landing
Phone: (530) 662-5253

Woodland Motors Chevrolet Buick Cadillac GMC ★★★★★

Auto Repair & Service, New Car Dealers, Automobile Parts & Supplies
Address: 1680 E Main St, North-Highlands
Phone: (888) 969-7133

Willy`s Auto Service ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting
Address: 7542 Warner Ave # 104, Midway-City
Phone: (714) 842-3161

Western Brake & Tire ★★★★★

Auto Repair & Service, Brake Repair, Tire Dealers
Address: 801 E Ball Rd, Rowland-Heights
Phone: (714) 533-1152

Auto blog

Ford Mustang hit by Moore' Oklahoma's EF5 tornado lives to do another burnout

Fri, 07 Jun 2013

Oklahoma recently saw the destructive power of an EF5 tornado, but in the aftermath of the devastation, we've also been witness to the incredible resilience of the human spirit. Moore, OK resident Jack Haden survived the storm but found that his 2003 Ford Mustang wasn't quite as lucky. As you can see in the image above, the tornado's 200+ mph winds did quite a number on the car, but while most people would have likely called their insurance company and scrapped the car, Haden had other plans.
After finding the car and seeing that its V6 still fired up, Haden spent a couple hours getting the car, um... roadworthy(?)... by removing the doors and front clip, cutting off the roof and putting on some new wheels and tires. He noticed that driving it around brought some comic relief to an area that needed a reason to laugh and smile. Check out the KSBI TV news report video below showing before and after pictures of the tough 'Stang, as well as a video showing the newly lightweight coupe doing a smoky burnout.

2016 Ford Focus RS shows up in Geneva, still bound for America [w/video]

Tue, Mar 3 2015

Representing the super-hot hatchback movement at the 2015 Geneva Motor Show, we have the 2015 Ford Focus RS, the third-generation to wear the performance-focused designation. Bound for America for the first time, it's fair to say we're darn excited for the Focus RS and its 2.3-liter, turbocharged four-cylinder. With at least 315 horsepower under the hood and the long-awaited inclusion of an all-wheel-drive system, there's little arguing that the RS will be seriously quick off the line. It should be darn good through the bends, too. The all-wheel-drive system packs a Dynamic Torque Vectoring Control system that sends up to 70 percent of the power to the rear axle. On top of the AWD's torque vectoring ability, the Focus RS adds a brake-based torque vectoring system, which transfers power laterally, as needed. Michelin Pilot Sport Cup 2 tires should only help keep the RS glued to the tarmac. A three-pedal setup is the sole transmission option, which should delight purists. According to Ford, both the clutch and the trans itself have been bolstered to handle the 2.3-liter's power. Ford also comprehensively upgraded the looks of the Focus RS relative to the lesser Focus ST. Its enormous rear wing and the back bumper's rear diffuser complement the car's menacing face. The ST's center-exit exhaust has been ditched for a meaty set of pipes, while the car on display in Geneva shows off a different set of alloys than what we saw during the car's original debut. Check out our full gallery of live photos of this hot Ford, available up top. And be sure to check out our Short Cut of the new hot hatch by scrolling down. All-New Ford Focus RS; High-Performance Hatch with Innovative All-Wheel Drive Set for U.S. Debut - Third-generation Ford Focus RS will be available in major markets around the world and for the first time in the United States; Focus RS follows the reveal last month of the new Ford GT supercar – a new era of Ford performance that will deliver 12 new vehicles by 2020 - All-new Ford Performance All-Wheel Drive with Dynamic Torque Vectoring Control paired with a powerful 2.3-liter EcoBoost® four-cylinder engine will provide impressive performance - Aggressive, functional design inside and out makes Focus RS the most powerful production Focus ever, with highly capable performance on both road and track - Professional rally driver and star of Gymkhana films Ken Block teamed with Ford as a consultant on development of Focus RS Cologne, Germany, Feb.

Ford continues autonomous tech development

Sat, Jun 27 2015

Some of the autonomous-driving features that Ford offers in Europe will come to the United States as soon as next year. The Blue Oval will add the pre-collision assist and pedestrian detection technologies that it has already installed on the Mondeo sedan in Europe. Those features, part of what Ford calls the "second of three phases" in driverless technology, will be brought stateside in a yet-to-be disclosed model, while most of Ford's US vehicle line will have the features by 2019. It has been testing an automated Fusion for more than a year. Ford is looking to build upon the autonomous-vehicle technology that it already has on models such as the Fusion, Taurus, F-150, Edge, and Explorer. Those amenities include active-park assist, lane-departure warning, and blind-spot monitoring. Ford said early last year that it was working with the Massachusetts Institute of Technology (MIT) and Stanford University to develop algorithms for use in driverless cars. The effort is part of Ford's so-called "Blueprint for Mobility" geared toward autonomous driving features that are being developed over the next decade. FORD COLLABORATES WITH SILICON VALLEY INNOVATION ECOSYSTEM ON AUTONOMOUS VEHICLES, 3D PRINTING, WEARABLE TECHNOLOGY Autonomous vehicle technology is another step closer to production at Ford – moving from a research effort to an advanced engineering project Ford announces it is working with Silicon Valley-based 3D-printing firm Carbon3D to quickly produce high-quality automotive-grade parts Ford kicks off wearable technology development with MyFord® Mobile app extension – coming soon to smartwatches including Android Wear – providing customers the ability to check vehicle driving range, battery charge and more for their plug-in hybrid or electric vehicle quickly from their wrists Autonomous vehicle technology is another step closer to production at Ford, moving from a research effort to an advanced engineering program, the company announced today. Ford has appointed a director of autonomous vehicle development – 29-year Ford veteran Randy Visintainer – and created a global team to work on the advanced program. Ford Research and Innovation Center Palo Alto is working on the global Ford team to deliver the Ford Smart Mobility plan, which aims to take the company to the next level in connectivity, mobility, autonomous vehicles, the customer experience and big data.