1998 Ford Crown Victoria No Reserve P71 on 2040-cars

Auto blog

A cool boost to turbocharger performance

Since the advent of the forced-induction engine, we have been looking for ways to get every drop of performance we can. There are many approaches to getting additional power using better intercooling, water injection, or even adding nitrous oxide. One take on a short instant burst of power is being researched by Mahle and involves providing supercooled air to an engine, which allows it to burn a leaner fuel mixture and produce more power. The supercooling idea is not new and was examined by Ford in 1993 on the Mustang Mach III concept car, then brought up again in 2003 with the SVT F-150 Lightning concept. Ford called its system the SuperCooler; it was designed to work with any turbocharged or supercharged engine equipped with a water-to-air intercooler. The system on the Lightning concept used a small tank of antifreeze that was hooked up to the truck air conditioning compressor. The air conditioning compressor cooled the antifreeze down to about 30 degrees. The other side of the tank was hooked up to the air-to-water intercooler, which usually had a temperature over 100 degrees. Once the antifreeze was circulated from the tank into the intercooler, it would lower the intercooler temperature and provide for a cooler, denser air charge into the engine; the result was around 50 extra horsepower for a burst of about 30 seconds to a minute, depending on the size of the tank. The system for the Lightning was to be offered as a $750 option and would have been targeted towards drag racers and the like, as it could be used for a run down the drag strip and then re-cooled by the time the truck was back in line. The system was fairly non-intrusive – it only weighed about 25 pounds and did not require a new compressor or intercooler. But as with many concepts, it was ultimately scrapped. The technology was always stuck in the back of my mind, but with larger and more powerful engines being produced it could not find its place. With the advent of new fuel economy standards, we have seen small-displacement turbocharged engines pop up and they seem like the perfect candidate for this type of technology. Ford's EcoBoost 1.0-liter three-cylinder turbocharged engine, as used in the Fiesta and Focus, is one such candidate for this technology. It would add a negligent amount of weight but could provide a boost of 10 to 20 horsepower when needed, like merging onto the highway or catching up to traffic.

BMW, Hyundai score big in JD Power's first Tech Experience Index

While automakers are quick to brag about winning a JD Power Initial Quality Study award, the reality, as we've pointed out before, is that these ratings are somewhat misleading, since IQS doesn't necessarily distinguish genuine quality issues. JD Power's new Tech Experience Index aims to solve that problem. The new metric takes the same 90-day approach as IQS but focuses exclusively on technology – collision protection, comfort and convenience, driving assistance, entertainment and connectivity, navigation, and smartphone mirroring. It splits the industry up into just seven segments, based loosely on size, which is why the Chevrolet Camaro is in the same division (mid-size) as Kia Sorento and the Mercedes-Benz GLE-Class is in the same segment as the Hyundai Genesis (mid-size premium). It makes for some screwy bedfellows, to be sure. Still, splitting tech experience away from initial quality should allow customers to make more informed and intelligent decisions when buying new vehicles. In the inaugural study, respondents listed BMW and Hyundai as the big winners, with two segment awards – the 2 Series for small premium and the 4 Series for compact premium, and the Genesis for mid-size premium and Tucson for small segment. The Chevrolet Camaro (midsize), Kia Forte (compact), and Nissan Maxima (large) scored individual wins. Ford also had a surprising hit with the Lincoln MKC, which ranked third in the compact premium segment behind the 4 Series and Lexus IS. This is a coup for the Blue Oval, whose woeful MyFord Touch systems made the brand a victim of the IQS' flaws in the early 2010s. But Ford and other automakers might not want to celebrate just yet. According to JD Power, there's still a lot of room for improvement – navigation systems were the lowest-rated piece of tech in the study. Instead, customers repeatedly saluted collision-avoidance and safety systems, giving the category the best marks of the study and listing blind-spot monitoring and backup cameras as two must-have features – 96 percent of respondents said they wanted those two systems in their next vehicle. But this isn't really a surprise. Implementation of safety systems from brand to brand is similar, and they don't require any input from users, unlike navigation and infotainment systems which are frustratingly deep.

Ford F-150 production hampered by frame shortage

If anyone has questions about how Ford's new aluminum-bodied F-150 will hold up, it's not buyers. Orders are so strong for the fullsize pickup that competitors General Motors and Ram are discounting their offerings to hold onto market share. It's a shame for the Blue Oval then, that it can't build all the trucks it needs because frame supplier Metalsa isn't delivering enough frames. Neither Ford nor Metalsa has said what the problem is, but Ford employees are at Metalsa's Kentucky plant trying to get it sorted out, Automotive News reports. Overtime shifts at the Dearborn Truck Plant and the Kansas City Assembly Plant have been canceled due to the shortage that's been a problem for at least two months now. The issue is exacerbated by this being the changeover period in production from the old model to the new, which comes with its own issues. That would help explain why even though Dearborn production finished ramping up in January, output in April was down 9.2 percent compared to last year, according to AN. Transaction prices are up for the new truck, but overall F-150 production in Q1 was down 40 percent, and missing product means missing profits. Combined with the production drop for the new Ford Edge, the company's Q1 bottom line was robbed of $1 billion. It isn't clear when the frame issue will be solved, but workers at the plants are ready to run "all-out" when it is. Related Video: News Source: Automotive News - sub. req.Image Credit: Copyright 2015 Drew Phillips / AOL Plants/Manufacturing Ford Truck kansas city assembly plant