1996 Ford Crown Victoria White With Gray Leather Old Man Sunday Church Car on 2040-cars

Auto blog

FIA introduces 'Hypercar Concept' for World Endurance Championship

One of the most common jabs at hypercars is the question, "Where can you drive them to their potential?" Imagine the answer being: to the checkered flag in the 24 Hours of Le Mans. We're not there yet, but the FIA World Motor Sport Council took a step closer to the possibility during its second annual meeting in Manila, the Philippines. One of three initiatives the WSMC announced for the 2020 World Endurance Championship was "Freedom of design for brands based on a 'Hypercar' concept." This "Hypercar concept" would replace LMP1 as the premier class in the WEC. The dream, of course, would be seeing racing versions of the AMG Project One, Aston Martin Valkyrie AMR Pro, Bugatti Chiron, Koenigsegg Regera, McLaren Senna GTR, Pagani Huara BC, and the rest of the gang trading paint and carbon fiber through Dunlop in a heinously expensive version of "Buy on Sunday, sell on Monday." The reality is that we don't have all the details yet on the set of regulations called "GTP," but the FIA wants race cars more closely tied to road cars, albeit with the performance level of today's LMP1 cars. Exterior design freedom would shelter internals designed to reduce costs, the FIA planning to mandate less complex hybrid systems and allow the purchase of spec systems. One of the FIA's primary goals is lowering LMP1 budgets to a quarter of their present levels. Audi and Porsche budgets exceeded $200 million, while Toyota - the only factory LMP1 entry this year and next - is assumed to have a budget hovering around $100 million. Reports indicated that Aston Martin, Ferrari, Ford, McLaren, and Toyota sat in on the development of the proposed class. If the FIA can get costs down to around $25 million, that would compare running a top IndyCar team and have to be hugely appealing to the assembled carmakers. The initiative represents another cycle of the roughly once-a-decade reboot of sports car racing to counter power or cost concerns. The FIA shut down Group 5 Special Production Sports Car class in 1982 to halt worrying power hikes, and introduced Group C. In 1993, Group C came to an ignoble end over costs; manufacturers were spending $15 million on a season, back when that was real money and not one-fifth of a Ferrari 250 GTO. Then came the BPR Global GT Series that morphed into the FIA GT Championship, which would see the last not-really-a-road car take overall Le Mans victory in 1998, the Porsche 911 GT1. That era would be most aligned with a future hypercar class.

Ford spills SEMA all over its Expeditions

If you're going to this year's SEMA Show in Las Vegas, it's going to be tough to miss the Ford booth, simply for its size. The Blue Oval is bringing over a dozen customized examples of the 2015 Mustang and a quintet of modded Transits. The latest announced addition is a trio of upgraded 2015 Expeditions showing different takes on the recently refreshed SUV.
Any vehicle tuned by Dub Magazine needs to ride on massive wheels, and the Expedition (pictured above) that it has for SEMA is no exception. The SUV has 26-inch Dropstars wheels wrapped in Pirelli tires, and, making them look even larger, the suspension is also lowered. The rest of the custom has some mild upgrades like mesh grilles in front, tinted windows, an integrated radar detector and new upholstery inside.
Tijn wants to boost the performance of the 3.5-liter EcoBoost V6 for its take on the Expedition. The company claims to add 40 horsepower to bring total output to a claimed 405 by upgrading the engine with a charge cooler from Vortech Engineering, a custom side exhaust and a custom tune. To match the extra grunt, the SUV also gets bigger brakes, an Air Lift suspension and 24-inch, copper-colored wheels with custom fender flares.

Ford recalling 433k cars for engines that don't shut off

Ford Motor Company has announced an enormous recall affecting 433,000 vehicles built between April 2014 and June 2015. There's a problem with the body control module in the affected vehicles that can prevent them from turning off, even if the key is removed from the ignition or stop/start button has been pressed. Individual models include the Focus and C-Max, both built at the Michigan Assembly Plant. The defective Foci were built between June 17, 2014 and June 12, 2015, while the C-Maxes were built between April 22, 2014 and June 12, 2015. Also affected are model year 2015 Escape CUVs, built at the Louisville Assembly Plant in Kentucky, between April 1, 2014 and June 12, 2015. As is usually the case, the overwhelming majority of vehicles – 374,381 – are registered in the United States, while the 52,180 are in Canada and 5,135 are in Mexico. The Blue Oval is not aware of any injuries or accidents due to this defect. Individual consumers, meanwhile, will need to report into dealers to have the body control module's software updated. Scroll down for the brief press release from Ford. Related Video: FORD ISSUES SAFETY COMPLIANCE RECALL IN NORTH AMERICA DEARBORN, Mich., July 2, 2015 – Ford Motor Company is issuing a safety compliance recall for approximately 433,000 vehicles in North America, including certain 2015 Focus, C-MAX and Escape vehicles, for an issue with the body control module. In these vehicles, it could be possible for the engine to continue to run after turning the ignition key to the "off" position and removing the key, or after pressing the Engine Start/Stop button. This is a compliance issue with FMVSS 114 regarding theft protection and rollaway prevention. Ford is not aware of any accidents or injuries associated with this issue. Affected vehicles include certain 2015 Focus vehicles built at Michigan Assembly Plant from June 17, 2014, through June 12, 2015; certain 2015 C-MAX vehicles built at Michigan Assembly Plant from April 22, 2014, through June 12, 2015; and certain 2015 Escape vehicles built at Louisville Assembly Plant from April 1, 2014, through June 12, 2015. There are 432,096 vehicles in North America, including 374,781 in the United States and federalized territories, 52,180 in Canada and 5,135 in Mexico. Dealers will update the body control module software at no cost to the customer.