Ford : Early Bronco 1967 Frame Off Restoration on 2040-cars
Vista, California, United States
Body Type:SUV
Vehicle Title:Clear
Engine:289
Fuel Type:Gasoline
For Sale By:Owner
Number of Cylinders: 8
Make: Ford
Model: Bronco
Trim: SUV
Options: 4-Wheel Drive, CD Player
Drive Type: RWD 4x4
Mileage: 1
Exterior Color: White
Disability Equipped: No
Interior Color: Black
Warranty: No
1967 Ford Bronco
This Bronco build was a Body off restoration, built from the ground up. Build completed Sept 2013, a lot of upgrades, all wiring cleaned up, runs strong, shifts flawlessly, 4 wheel works like a champ, and is rust free! I do have most receipts and a full spread sheet of everything that has gone into this build. I have photos of the build from start to finish. I do have a full soft top and the hardware that came with the bronco when i purchased it, it is not new but does the trick, thanks.
Body Exterior
-Body was fully reworked
-New Driver and Passenger Inner Fender supports
-New Sport side mirrors
-New front bumper
-Rear bumper painted to match
-New Flex Fender flares
-New red Poly body mounts and hardware
-New Windshield and gasket
-New Clear H4 Headlights
-New Clear park light lens
-New brake lens
-All lights work perfect (Headlights (Hi/Lo), park lights, flashers, reverse lights and license plate light)
-New Bikini Top
-OEM Bronco script emblems, powder coated satin black
-New side window anti rattlers and felts
-New OE hood
-New Diamond plate bed rails, powder coated satin black
-New OEM V289 Emblems (kept the look original)
-New Red FORD lettering on grille
-New Black FORD lettering on tailgate
-All new bolt hardware for the fenders and grille
-New tire carrier latch
-Tire carrier painted satin black
-New audio antenna
-New Wiper blades
Body Interior
-New Clutch, Brake and Gas Pedals
-Inner doors painted satin black
-Door jams painted satin black
-New Glove Box insert
-New Rear view mirror
-New Door Limiting straps and hardware
-New Roll bar pad and tape
-Floor pans replaced
-Interior floors are Line-X
-New carpet w/ aluminum hold downs (Floor and tailgate)
-New Retractable front seat belts
-New Rear seat belt
-New Floor mats
-Diamond plate door seals, powder coated black
-New aftermarket front seats, black with red stitching (racing style)
-Original back seat w/ custom upholstery to match, black with red stitching
-New Billet "Gun Grip" transfer case handle
-New Hurst floor shifter w/ white knob
-New Aluminum steering column surround bezel
-New matching ignition switch and door locks
-New ignition switch bezel
-New hazard switch and relay
-New billet dash knobs
-Custom bed side walls (same material as rear seat)
-Custom door panels (same material as bed walls and rear seat)
-New Sony sound system, CD Head unit w/ Aux input, 6x9" 3-way in rear panels, 5.25" 3-way in doors
-Dual motors for windshield wipers
-New wiper switch
-All light bulbs replaced in Instrument cluster
-All gauges work
-New Grant 4 spoke steering wheel (horn works)
-New lighter
-New door lock knobs
-New Hi/Lo beam foot switch
Under the Hood
-Rebuilt 289 w/ 302 Heads (9.8:1 compression) - approx 500 miles on motor
-New Pro Comp air gap intake manifold
-Performance 351 cam
-New Holley 670 carburetor w/ dual fuel feed, Avenger Series
-All New MSD ignition (6A ignition box, 8mm plug wires, Blaster 2 coil)
-New spark plugs (autolite 45s, gapped @ .044)
-New Headman Long tube headers
-All New V-belts
-New chrome crank pulley
-New chrome water pump pulley
-New chrome power steering pulley
-New chrome radiator fan shroud
-New Chrome valve covers
-New Chrome PCV
-New Chrome water neck w/ 180 degree thermostat
-New oval air cleaner, billet with washable K&N filter
-New aluminum radiator
-New upper and lower radiator hoses
-New heater hoses
-New electric distributor
-New Alternator
-New Starter
-New mufflers (Flowmaster original 40s)
-New oval exhaust tips, side exit before back tires
-New full 2.5" exhaust system
-All wiring cleaned up and installed in braided loom
-New aluminum gas line, from gas tank to carburetor (all 3/8")
-New glass fuel filter (replaceable filter inside glass housing)
-New windshield washer tank and pump
-New windshield washer rubber tube lines
-New brake master cylinder
-All New fluids (Coolant, Oil, Washer, Transmission, Transfer case and Brake)
-New side hood bumpers
-New adjustable hood bumpers
Drive train
-Manual 3 speed
-Dana 20 transfer case
-Dana 30 Front axle w/ 4.10 gears
-9" rear axle w/ 3.50 gears
-Drums in all corners, painted silver
-New Delphi power steering box
-New Flaming River steering U-joint
-New chrome Saginaw power steering pump
-New Custom fit hydraulic hoses for power steering box to pump
-Strong clutch
-New transfer case seals
-Newly replaced rear drive shaft
-Fully rebuilt originally front drive shaft (Borg Warner)
-3" lift, front coil springs powder coated red
-New front and rear Pro Comp shocks w/ matching red boots
-New front stabilizer shock w/ red boot
-All New red poly bump stops
-New Hurst floor shifter
-New Hurst back up light switch
-New drum brake bleeders
-New chrome lugs
-New Locking lugs (one for each rim plus spare)
-New adjustable front drag link
-New radius arm poly bushings
-New Grade 8 hardware for radius arms
-5 New 15" Mickey Thompson rims
-5 New General Grabber red letter edition tires (33x12.50x15)
Paint
-Chassis: Satin black
-Under cab: Flat Black
-Body: Pure White
-Grille: Pure White boarder w/ Satin black center
-Under Hood: Satin Black
-Engine Bay: Satin Black
-Interior: Satin Black
-Axles: Flat Black w/ Red third members
-Bumpers: Satin Black
PAYMENT: I require a $500 deposit via PayPal within 48 hours of end of auction. The balance is due within 5 days of end of auction.
BUY IT NOW: This is a Buy It Now auction. This bronco is for sale locally , I have the right to end auction early should the bronco sell. If you would like to purchase this car directly, please contact me.
Please understand that the bronco listed is sold AS-IS
Ford Bronco for Sale
Ford bronco, restored and customized(US $38,888.00)
1974 bronco beautiful classic 4x4 fresh paint and interior v8 power steering
1966 ford early bronco(US $8,000.00)
1970 ford bronco original(US $35,000.00)
"wow" no reserve, 1974 bronco explorer "classic"
1973 ford bronco 4x4(US $45,000.00)
Auto Services in California
Zube`s Import Auto Sales ★★★★★
Yosemite Machine ★★★★★
Woodland Smog ★★★★★
Woodland Motors Chevrolet Buick Cadillac GMC ★★★★★
Willy`s Auto Service ★★★★★
Western Brake & Tire ★★★★★
Auto blog
Huge, pricey trucks haul jobs and profits for the Detroit Three
Tue, Feb 5 2019DECATUR, Texas — Mickey McMaster is on his 12th pickup truck. The 61-year old farm equipment dealer in Decatur, Texas, two weeks ago treated himself to a 2019 GMC Denali for around $69,000 — a reward for long hours at work. "For me this is the Cadillac of trucks, it's a real luxury vehicle," McMaster said. "I've worked my way up to afford a truck like this and it shows that I've earned it." McMaster is the kind of customer General Motors Co is banking on as it plans to add 1,000 jobs at a plant in Flint, Michigan that will build a new generation of its largest pickups. Demand from Texas and other heartland states for big pick-ups is providing a lifeline to many workers the No. 1 U.S. automaker is laying off at plants elsewhere. The Detroit Three automakers and thousands of their U.S. workers are counting on customers like McMaster to keep buying bigger and more luxurious pickup trucks even if overall U.S. vehicle demand weakens this year, as most analysts predict. At Flint, GM will build a new generation of its heavy-duty Chevrolet Silverado and GMC Sierras, including luxury models that are some of the most profitable vehicles on the planet. GM, Ford Motor Co and Fiat Chrysler Automobiles NV's Ram division own the segment and are each doubling down with new or redesigned models launching this year. Sales of heavy-duty pickups in the United States have grown to more than 600,000 vehicles a year, up more than 20 percent since 2013, according to industry data. Prices for luxury models can easily top $70,000. GM on Tuesday celebrated the launch of a new generation of heavy-duty GMC and Chevrolet pickups at the assembly plant in Flint, Michigan, that is now building all such trucks for the company. At the same time that GM is laying off thousands of U.S. workers and planning to shutter five North American factories, Flint is hiring. The plant runs on three daily shifts, six days a week. As the new model's assembly system ramps up, the plant's capacity will increase by more than 25 percent, plant manager Mike Perez told Reuters. The Flint plant plans to add 1,000 workers, more than half of the 1,500 factory workers who have asked to transfer from plants GM has targeted for shutdown as part of CEO Mary Barra's restructuring plan. "We're bringing in 50 to 100 people every week," said Perez. Workers last week were still finishing the job of retooling the Flint factory to build the new heavy-duty trucks as part of a $1.5 billion investment project.
Ford celebrates 1 millionth Mustang built at Flat Rock
Thu, 18 Apr 2013Yesterday, the Ford Mustang turned 49 years old, and Ford didn't miss the opportunity to celebrate the one millionth version of the Mustang rolling off the assembly line at the Flat Rock Assembly plant. Production of the Mustang at Flat Rock coincided with the fifth-generation design launching in 2004, and the one millionth car was the car shown above, a 2014 GT convertible painted in Ruby Red.
In total, Ford has sold more than 8.5 million Mustangs since the original car went on sale, but some of the key milestones over the car's nine years at Flat Rock include the Shelby GT-H, Bullitt, Boss 302 and, of course, the 662-horsepower Shelby GT500. Scroll down for a press release celebrating Flat Rock's milestone Mustang.
Driving the Kia K5 and Mini Cooper JCW GP, plus an interview with Jimmy Chin | Autoblog Podcast #637
Fri, Jul 24 2020In this week's Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by Senior Editor, Green, John Beltz Snyder and News Editor Joel Stocksdale. They veer off right away into talking about their dream project garages. Next up is news, including some info on the next Nissan Z car, the Honda Fit being discontinued in the U.S., new Mercedes-Benz EQS details, and some talk about the new, electric GMC Hummer being adapted for the military. Then they talk about driving the new Kia K5 sedan and the Mini Cooper JCW GP, before they opine about the 1966 Pontiac GTO. Autoblog Senior Producer Chris McGraw interviews Oscar-winning filmmaker Jimmy Chin about his collaboration with Ford for the Bronco reveal, and more. Finally, our editors help a listener in the U.K. pick a used vehicle in the "Spend My Money" segment. Autoblog Podcast #637 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown Some thoughts on project cars News Nissan suggests the next-generation Z won't be electrified at launch Fit Is Gone! Honda drops subcompact hatch in U.S. Mercedes-Benz announces the electric EQS will offer over 435 miles of range GMC's electric Hummer could someday serve alongside the Humvee in the U.S. Army Driving the 2021 Kia K5 Driving the 2020 Mini Cooper JCW GP 1966 Pontiac GTO: Love it or hate it? We talk Ford Bronco and other adventures with Oscar-winning filmmaker Jimmy Chin Spend My Money Feedback Email – Podcast@Autoblog.com Review the show on iTunes Related Video: