2012 Fiat 500 Lounge Low Miles 1 Owner Clean Carfax on 2040-cars

Auto blog

Fiat's Ecobasic concept shows what the city car of the future looked like in 1999

In the late 1990s, Fiat set out to prove cheap and eco-friendly weren't mutually exclusive. It argued a car could be both with an innovative, opinion-cleaving concept named Ecobasic built to preview the econobox of the future. Fiat quietly presented the Ecobasic at the 1999 edition of the Bologna auto show, which was still a big deal 21 years ago, and it displayed it again at the following year's Geneva show. Its high-top Converse-shaped silhouette turned heads everywhere it went, and that was only the beginning. Looking closer revealed its front end received a transparent panel that let users add oil, coolant, wiper fluid, or give the battery a jump. Audi adopted a similar solution for its A2. It had one door on the driver's side, two on the passenger's side, and a transparent hatch underlined by a pair of horizontal lights. It stretched 137.7 inches long, 67.3 inches wide, and 57.8 inches tall, dimensions that made it about two inches taller, three inches wider, and an inch lower than a modern-day 500. Keeping manufacturing costs in check was a priority, so Fiat used plastic body panels dyed with color during the production process and mounted them to a steel structure, a configuration not unlike the Smart ForTwo's. They were designed to be recycled at the end of the car's life cycle. Inside, the passengers were treated to a marvelous exercise in simple, back-to-the-basics design. The driver sat in front of a four-spoke steering wheel, while a speedometer and a fuel gauge were integrated into a pod that sprouted from the center of the dashboard. The automatic transmission's gear selector, a handful of buttons, and the HVAC controls were aligned below it. The domed, bolted-down hood covered a 1.2-liter four-cylinder turbodiesel developed specifically for the Ecobasic. It showcased Fiat's Multijet common-rail technology, which promised improve fuel economy without compromising power. On paper, that's exactly what it achieved. The four developed 61 horsepower at 3,500 rpm and 118 pound-feet of torque at 1,800 rpm, which were reasonably respectable figures for an Italian city car made in the late 1990s, and it returned nearly 80 miles per gallon. Fiat quoted a 13-second 0-62-mph time. The company apparently did not blush when it hinted it could build 200,000 units of the Ecobasic annually and sell each one for approximately 5,000 euros, a price which would have made it one of the cheapest new cars sold in Europe.

Ram and Fiat working on possible midsize pickup for global markets

The midsize pickup segment is enjoying a recent boom globally, with updated models like the new Ford Ranger on the way and a revised Toyota Hilux already testing. The next automaker to take the plunge into the market might be FCA with this recently spotted, highly camouflaged truck. Click through the gallery to see the pickup wearing two different disguises during cold-weather testing. Unfortunately, they keep the truck very well hidden, and even the bed is covered in both of them. Still, it appears that the front end wears a fairly upright design, and the four-door cab is obvious. Also, take a look at the rear to spot coil springs for the suspension, rather than leaf springs. According to our spies, this vehicle's size is larger than the current front-wheel drive Fiat Strada and is closer in dimensions to models like the Ranger and Hilux. Of course, the most intriguing question is whether FCA might bring this vehicle to the US as a Ram competitor against the Chevrolet Colorado and GMC Canyon. The company's five-year plan makes no mention of such a model here through at least 2018, though. However, Europe and South America are set to receive a midsize pickup in 2016. Perhaps, that's what we are seeing here. Related Video: Featured Gallery Fiat-Ram Pickup Spy Shots View 14 Photos Image Credit: CarPix Design/Style Spy Photos Fiat RAM Truck FCA

Stellantis announces ‘Circular Economy’ business to drive revenue, decarbonization

Stellantis has already announced its plans to reach net-zero carbon emissions by 2038. Today, the automaker has announced a new business unit to help it reach that goal while generating 2 billion euros per year in revenue by 2030. The “Circular Economy” business will help make revenue less dependent on finite, rare and ecologically problematic materials. The Circular Economy model features what Stellantis calls a “4R” strategy, comprising remanufacturing, repair, reuse and recycling. The goal is to make materials last as long as they can, reducing reliance on the acquisition of those precious new materials in the future by returning them to the business loop when theyÂ’ve reached the end of their first life. Through these processes, Stellantis says it can save up to 80% raw material and 50% energy compared to manufacturing a new part. Remanufacturing, or “reman” in Stellantis shorthand, means dismantling, cleaning and rebuilding parts to OEM spec. Nearly 12,000 remanufactured parts are available for customers to purchase. Some remanufacturing is done in-house, and some with partners and through joint ventures. Repair is pretty obvious — fixing parts to put back into vehicles. This also consists of reconditioning, to make a vehicle feel like new. Stellantis boasts 21 “e-repair” centers for repairing electric vehicle batteries.  Reuse refers to parts still in good condition from end-of-life vehicles sold as-is. Stellantis says it has 4.5 million multi-brand parts in inventory. These are sold in 155 countries through the B-Parts e-commerce platform. Reuse also refers second-life options, such as using batteries outside of automotive purposes. Recycling involves dismantling parts and scraps back into raw material form that is then looped back into the manufacturing process. Stellantis says it has collected 1 million parts for recycling in the past six months. Recycling doesnÂ’t get counted in that aforementioned 2 billion euros of revenue, but it does save the company money on acquisition of raw materials. As for batteries, specifically, Stellantis expects this recycling business to ramp up after 2030, when the packs currently in service begin to reach the end of their lifecycle. Stellantis will use its new “SUSTAINera” label to denote parts that are offered as part of its Circular Economy business.