1952 Fiat 500 Base 0.6l on 2040-cars

Auto blog

2019 Fiat 500X First Drive Review | Anchor's away!

MALIBU, Calif. — We lived with the Fiat 500X for a year and were pleasantly surprised by everything it had to offer but — and this is a big but, a but worthy of Sir Mix-a-LotÂ’s affection — the entire powertrain.  ItÂ’s no small feat that the small crossover was able to charm us despite our distaste for the very thing that makes it move. For 2019Â’s mid-cycle facelift, Fiat has addressed that exact issue. Gone is the old, naturally aspirated 2.4-liter inline-four that Fiat called the Tigershark, but we called a boat anchor. It was noisy, unresponsive, and an insult to tiger sharks. We preferred the lower-spec 1.4-liter turbo to the higher-spec 2.4, and suggested that it should be offered on all trims. Now the sole engine on all trim levels is a turbocharged 1.3-liter with stop-start and Multiair III, FiatÂ’s third-generation cam-less variable intake valve system. Fiat also eliminated the front-wheel-drive option for 2019, making all 500Xs all-wheel drive. Though the motor is down three horsepower overall — 177 versus the TigersharkÂ’s 180 — it more than makes up for it in torque. The outgoing engine produced 175 lb-ft at a lofty 3,900 rpm, which wasnÂ’t really useful in real-world driving. The 2019 comes with 210 lb-ft at a mere 2,200 rpm, giving drivers significantly more grunt at the low end. Beyond that, Fiat says the engine is less thirsty than the 2.4-liter — the only engine available in 2018 all-wheel-drive models — returning 24 city and 30 highway mpg. ThatÂ’s 3 mpg better in the city and 1 on the highway, made possible with more efficient technologies like needle roller bearings around the exhaust cam, a variable displacement oil pump, and an integrated charge-air cooler and exhaust manifold. We'll note that the 2018 500X equipped with front-wheel drive, the 1.4-liter turbocharged engine and six-speed manual transmission is still the most efficient of them all, returning 25 city and 33 highway mpg. “The engine is about 80 pounds lighter than the 2.4,” chief engineer Adam Remesz told us, putting total curb weight for the AWD model with 17-inch alloys at 3,305 pounds. Improved efficiency also means reduced CO2 emissions, down from 264 grams per mile to 242. According to Remesz, thatÂ’s “about the amount expelled by an average adult male running a 10k race.” Sure. The new mill mostly addresses our biggest gripe with the 500X. The throttle feels peppier, and rolling acceleration is much improved.

Dodge Charger and Challenger will live on, but a new Viper is unlikely

BALOCCO, Italy — As FCA's latest five-year plan was presented last week, most of the day was focused on four brands — Jeep, Ram, Maserati and Alfa Romeo. That left a lot of people wondering about the future of the Chrysler, Fiat and Dodge nameplates. At the last five-year event, Dodge was one of the main features. We heard plans for an expanded lineup that included refreshed versions of the Viper, Challenger and Charger, the last two riding on the Alfa Romeo Giorgio platform. Times sure have changed. Dodge isn't going away, but the brand will be narrowed and focused. Performance is the name of the game, but don't look for a new Viper anytime soon. FCA CEO Sergio Marchionne simply said it's "not in the plan." Marchionne thought it was a great idea but that it couldn't live on as a standalone product. If it does eventually return, expect it to share parts with other FCA products, possibly with one of the upcoming Maseratis. On the other hand, Marchionne confirmed that both the Dodge Challenger and Charger will continue to live on. In the last five-year plan, FCA said that the pair would share underpinnings with future Alfa Romeos. That was promising news for those hoping for smaller, lighter versions of each model that would be better suited to fight models like the Ford Mustang and Chevy Camaro. It seems the Alfa Romeo platform is off the table. Marchionne said the current LX platform would indeed live on, though it would be "unrecognizable" compared to what we have today. The LX architecture is ancient, and, although it's been continuously updated, its basic bones date back to the DaimlerChrysler days. Marchionne said that the Alfa platform just doesn't have the character American shoppers are looking for in those vehicles. It's unclear when the next iteration of the Charger and Challenger will arrive, but expect another refresh sometime before 2022. Look for an updated version of the tried-and-true Hemi V8. Rumors continue to swirl about a larger and more powerful 7.0-liter variant dubbed the Banshee, but we'll have to wait and see how that pans out. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Final Toledo Jeep decision may have nothing to do with city's efforts

Toledo, OH is doing all that it can to keep production of the Jeep Wrangler in its boundaries, but the biggest issue facing the plant may be insurmountable, no matter how desperately the city wants to keep the Wrangler local. The Wrangler is built in a rather interesting manner at the Toledo Supplier Park: Fiat Chrysler only handles the very final assembly of each vehicle, while two other companies, Kuka, a German firm, and Hyundai-Mobis, a member of the sprawling Hyundai empire, produce the body and chassis, respectively. The vehicles are then transferred over to the FCA part of the park, where they're painted and completed. This was, as The Detroit News explains, a convenient arrangement back in 2006 when the supplier park opened. Chrysler, which was still owned by Daimler at the time, arranged for Kuka and Mobis to handle production, saving it a huge sum of money. Both suppliers own their own machinery and buildings and employ their own workers. Now that FCA is a relatively healthy entity, though, there's not a lot of need to be sharing profits with two other companies. "What [FCA boss Sergio Marchionne] would like is to have the advantages of high-capacity utilization, owning that capacity and taking advantage of that for himself versus having a supplier doing some of the things his competitors do internally," David Cole, chairman emeritus at the Ann Arbor, MI-based Center for Automotive Research, told The News. "It really adds another level of complexity to the situation." While Sergio Marchionne is a man that generally gets what he wants, it seems unlikely that either Mobis or Kuka would give up their role quietly. According to Jon Zapf, Mobis North America's chairperson for UAW Local 12, the company "definitely wants to maintain their part of this production process." According to The News, Jeep is likely to announce the location of next-generation Wrangler production in June. Expect to hear much more on this one in the coming months.