Srt10 Coupe Gts Blue With White Stripe Only 7501 Miles on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Dodge Challenger Hellcat drift video is pure horsepower porn

We could listen to the whining, snarling 6.2-liter Hemi V8 in the Dodge Challenger and Charger Hellcats all day long. The noise just sounds like power that's being barely restrained and is everything about a muscle car that's right. The team at Pennzoil apparently understands that allure, too. The oil company has a new video where it lets the engine roar for over a minute, while a Challenger does some big, smoky drifts through an abandoned city. The whole stunt is edited together in a slickly produced way that looks fantastic. Although, the big finale might go a little too far and starts straining believability. Nonetheless, the Hellcat's wonderful noise is still the star of this show. Related Video:

1968 Dodge Super Charger is a super Charger with a supercharger

Mopar's latest custom creation is sure to be in the running for coolest car at this year's SEMA show. It's a 1968 Dodge Charger, a car selected in part because this year marks the car's 50th anniversary, but taken to the extreme and renamed Super Charger. The headliner of the car's radical upgrades is the new "Hellephant" engine. It's a take on the original car's 426-cubic-inch Hemi V8. But this new engine, with the same displacement, is based on the current Hemi V8, and adds a supercharger. All told, it makes a whopping 1,000 horsepower and 950 pound-feet of torque on 93 octane pump gas. It will be available as a crate engine, too. The engine is far from the only impressive change to the car. All over the body are mild to wild tweaks. The wide, uninterrupted grille from the original is still here, but it's a one-piece example now. And instead of hiding the headlights behind doors that have to open for illumination, the lights simply shine through the grille, retaining a clean look even at night. The whole car sits 2.5 inches lower than stock, and it's now four inches wider thanks to the huge fender flares. They house 305-mm-wide tires up front, and 315-mm tires in the rear. Likely the most complicated change to the car is the lengthened wheelbase. There are two more inches between the wheels now, something Mopar did to reduce the front overhang. A close second in complexity are the taillights. They're the same shape as the originals, but now the round elements are actually exhaust outlets. The tips also happen to be the same as those on the Alfa Romeo Stelvio. There are other details that help bring together the exterior. The rain rails have been smoothed out on the roof, the vent windows removed, special 426 stickers have been added, and the fuel door now has a Hellephant badge with a blue background with lots of little Mopar Ms. The interior gets some attention, too. The rear seat has been removed, Dodge Demon style. It gets a custom roll bar designed to be as unobtrusive as possible, even getting the hoop around the seats to roughly line up with where the windows meet. Gauges come from the Mopar catalog, and the steering wheel and seats are from the dearly departed Dodge Viper. They're particularly relevant, as the six-speed manual transmission comes from the Viper, too. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.