Rare Mint Collector Quality 2000 Dodge Viper Gts Coupe V10 Nicely Modded!!!! on 2040-cars

Auto blog

2014 Dodge Durango bows with eight-speed auto, updated looks [w/video]

Dodge has significantly updated its full-size Durango for the 2014 model year, giving the seven-passenger hauler a fresh look and a well-rounded boost of competitive features as it enters its fourth year in the showroom.
Cosmetically, it is hard to miss the revised front end with projector-beam headlamps and LED daytime running lamps, "floating" crosshair grille, a taller front bumper and a new lower fascia. The rear end of the facelifted Durango has been redesigned with the automaker's now-signature LED "racetrack" taillamps and resculpted rear fascia. All of the wheels are new too, with 18- and 20-inch options for each trim level with a variety of factory finishes.
Inside the cabin, buyers can select the automaker's latest Uconnect infotainment system with a full suite of infotainment features and connectivity accessed through an 8.4-inch touchscreen. Other optional goodies include a heated steering wheel, heated second-row seating and a Blu-Ray player capable of running unique programs on the twin individual rear monitors.

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

2020 Dodge Charger Hellcat Widebody, Scat Pack Widebody get grip, go faster

You all knew this was coming. Dodge basically showed it to the public a few months ago. But it's finally official, the 2020 Dodge Charger Hellcat Widebody and naturally aspirated Scat Pack Widebody are going into production. Like the Challenger Widebody, the Charger version is defined by its, well, wide body, which is now standard on all Hellcats and an option on Scat Packs. The fender flares add a total of 3.5 inches of width. Dodge also tweaked the front and rear bumpers and added wider side skirts to help the flares blend into the body. The Hellcat gets a unique rear spoiler, whereas the Scat Pack sticks with the same one its scrawnier twin uses. 2020 Dodge Charger Scat Pack Widebody View 20 Photos But the big advantage to this wide body is the fact Dodge can stick way more tire under the Charger. All Charger Widebody models get 11-inch-wide wheels with 305-mm tires at all four corners. Each version gets revised suspension, too. The Hellcat gets stiffer front springs, thicker front and rear anti-roll bars and retuned shocks. The Scat Pack gets a similar update, but without the thicker front anti-roll bars. Both cars also get six-piston front brake calipers from Brembo with two-piece rotors. All these handling upgrades mean the Charger is an even more impressive track machine. Dodge says the Hellcat now pulls 0.96g on a skid pad, and the Scat Pack Widebody does a little better at 0.98g. The Hellcat has also improved its lap time of Chrysler's 2.1-mile test course by 2.1 seconds, and the Scat Pack improved by 1.3 seconds. Both cars are also still fast in a straight line, with Dodge saying the Hellcat will hit 60 mph in 3.6 seconds on the way to a 10.96 quarter-mile time. Which, Dodge proclaims, makes it the world's most powerful and fastest mass-produced sedan. The Scat Pack Widebody will hit 60 in 4.3 seconds on the way to a 12.4-second quarter-mile.