Garage Kept 1 Original Owner Dodge Viper Rt-10 Flawless Collector Condition Look on 2040-cars

Auto blog

Dodge Scat Packages add Mopar performance upgrades in three stages

Dodge has revealed what it calls Scat Package Stage Kits that enhance the performance of the Charger and the Challenger equipped with the 5.7-liter V8, and the Dart equipped with the turbocharged 2.4-liter inline four-cylinder engine. The Scat Packs use Mopar performance parts that also can be bought separately. Most of the upgrades increase engine output, but Dodge somehow manages to not specifically mention the power gains associated with each Scat Pack.
The three Scat Packs offered for the V8-powered cars focus on higher power ratings, and each stage comes complete with a unique engine-management calibration to optimize output. Stage one comes with a cold-air intake and a cat-back exhaust; stage two adds a performance camshaft; and stage three really gives you the goods, adding ported polished cylinder heads and performance headers.
For the Dart, the Scat Packs focus on engine, transmission, chassis and brake upgrades. Stage one will net you a cold-air intake, a short-throw shifter and slotted rotors with performance brake pads; stage two adds a cat-back exhaust system and an engine-management calibration to increase output by taking advantage of premium-octane gasoline; and stage three adds 13-inch vented brake discs up front clamped by four-piston calipers, suspension with adjustable springs and struts and performance front and rear antiroll bars.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

Man crashes car through store window, says he needs a beer

Police body cameras captured a chaotic scene at a Cleveland-area convenience store after a man drove his car through the front of the store and barricaded himself in a walk-in cooler. According to WJW, the Convenience Mart in Rocky River, Ohio, had just closed in the early hours of May 7 when a black Dodge Challenger barreled through the security bollards at around 40 miles per hour and crashed through the front window. Police arrived to find the car parked in the store with its hazards on, the store clerk trapped beneath debris, and no driver. The clerk told officers the driver got out, told the clerk that he needed a beer, then wandered into the walk-in cooler. Officers found the driver barricaded inside the cooler. A tense standoff ensued with the agitated, confused man, who dared the cops to shoot him. Police learned he was suffering PTSD-related issues from his military service and job with the Federal Protective Service. "The conversation he was having with the police was deranged, consistent with somebody who was going through a mental crisis," RRPD Chief Kelly Stillman told WJW. Eventually, an officer was able to use a taser on the man, who put up a fight but was eventually subdued. He faces charges that include DUI and reckless driving. Thankfully, the store clerk escaped relatively unscathed. His life was saved by a deli case that absorbed the impact of the car and sheltered him from falling debris. "Had the car been over a couple more feet, he was hurt, it could have been serious bodily injury, even possibly death. I mean that's a four, five thousand pound automobile coming at 30, 40 miles an hour. He was lucky, very lucky," said Chief Stillman. Related Video News Source: WJW Auto News Dodge cleveland challenger