2006 Dodge Viper Srt10 Coupe Launch Edition Supercharged on 2040-cars

Auto blog

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.

Dodge Viper ACR reportedly green lit [w/video]

The Dodge Viper might be getting a little more venomous in the near future thanks to a return of the performance-honed ACR trim. According to an anonymous source leaking the info to Allpar, the version would go into production in July as a 2016 model year vehicle. FCA US showed a concept for a future ACR (pictured above) at the 2014 SEMA Show that sported carbon fiber parts for the front splitter and dive planes, plus a picnic-table-sized rear wing. The body also received ducts at the rear to shoot cool air to the differential. A set of 15.4-inch carbon-ceramic brake rotors also brought things to a halt in a hurry. The company promised all the aero pieces were sculpted in the wind tunnel to give the coupe even more downforce. To shed weight, engineers chucked the radio, speakers, carpet and sound deadening out of the interior, and they replaced many bits with even more carbon fiber. All of the tweaks are necessary because the ACR moniker carries serious cachet for the Viper at the track, especially at the Nurburgring. One reportedly did a 7:22 lap around the 'Ring in 2008, and another improved that further to 7:12 in 2011. Autoblog reached out to FCA US for comment about the possibility for the hotter Viper, but the company wasn't willing to comment about any possible, future projects. Related Video:

Dodge Hellcats change their stripes for 2016

If you've been on the fence about ordering up a new Dodge with Hellcat power, this might just provide the extra incentive you were looking for. Starting this month, Dodge is offering a new stripe option, exclusive to its most powerful muscle cars. The SRT Hellcat stripes are now available to order on the top-of-the-line, 707-horsepower versions of both the Charger and Challenger. The dual full-length stripes run all the way up from the front lip, over the grille, up the hood, accentuating the NACA duct, along the roof, down the trunklid, across the rear spoiler, and down the rear bumper. They feature a carbon-fiber texture, and can be ordered with any of eleven colors for an extra $995. Along with the stripes, Dodge has also announced that it is extending the availability of the exclusive Plum Crazy color – which was originally scheduled to expire at the end of December – for another month. The throwback hue can be ordered on Charger and Challenger models ranging from the SXT through the R/T models all the way up to the SRT 392 and Hellcat. 2016 CHALLENGER AND CHARGER SRT HELLCAT MODELS EARN EXCLUSIVE STRIPES, DODGE EXTENDS PLUM CRAZY PAINT - All-new SRT Hellcat dual exterior stripe design adds even more Dodge attitude to 2016 Challenger and Charger SRT Hellcat models - SRT Hellcat-exclusive dual full-length carbon-fiber pattern stripes provide a customized-from-the-factory look - Dealers will start taking orders for Hellcat stripes in January 2016 - SRT Hellcat dual stripes have a U.S. Manufacturer's Suggested Retail Price of $995 - Dodge is answering enthusiast demand for Plum Crazy exterior paint with an additional one-month run of the legendary and limited-edition high-impact hue January 8, 2016 , Auburn Hills, Mich. - For more than a year, Dodge Challenger and Charger SRT Hellcat models — the fastest and most powerful muscle cars ever with 707 supercharged HEMI® horsepower each — have stormed roadways and drag strips with acceleration blasts to 60 mph in the low 3-second range, generated more than 61 million sensational YouTube video views around the globe, enabled an entirely new generation of Dodge enthusiasts and now for 2016 have been rewarded with their very own Dodge performance stripes.