2006 Dodge Viper Srt10 on 2040-cars

Auto blog

2020 Dodge Charger Hellcat Widebody to race at Pikes Peak

The 2020 Dodge Charger Hellcat Widebody may be world's most badass Charger right now, but it won't be for long. This weekend, Dodge will unveil an even more serious Charger, a one-off racer that will run at Pikes Peak. Tim Kuniskis teased the race car during the Widebody reveal. It will have more power, more tire and more brakes than the road car. He didn't provide exact numbers for any of that, but we at least know it will have more than 707 horsepower, tires wider than 305 millimeters, and better brakes than the regular Hellcat. He said it will have an upgraded version of the Hellcat's 6.2-liter engine. We wouldn't rule out 797 horsepower like in the Hellcat Redeye and in the company's One Lap of America Dodge Durango. We suspect we'll have more concrete details and photos of the car very soon, since the Pikes Peak International Hill Climb takes place this Sunday. One other tidbit: Kuniskis said that we shouldn't expect any of the parts from the race car to show up as Mopar accessories. But we bet there will be plenty of aftermarket companies more than happy to help paying customers recreate it.

Help us decipher the cryptic license plate on the latest Dodge Demon teaser

If you've been following along, you know that the slow rollout of the Dodge Demon has been filled with hints and teasers of what's to come. Every release encourages fans to watch the videos over and over to try and catch any hidden info. Last week, brief a glimpse of the wheels in a video hinted at this week's reveal, 18x11 inch lightweight wheels wrapped in what the DOT barely considers street-legal rubber. Along with details on the custom Nitto tires, Dodge released an image of the Demon in all its wide-body glory. Planted on the back of the car is a cryptic Michigan license plate that reads #2567@35. It's obvious that this is another clue, but after a few hours of note taking, Google searches, and general discussion, we can't figure out what it means. We're throwing this out there in the hope that someone has better luck than we did. Here are some of the things we've ruled out: Address or coordinates 1/4 mile ET 1/4 mile trap speed Power Supercharger boost pressure Some event in 1982 A hint at gear or final drive ratio If you have some idea, post it in the comments. Related Video:

Dodge Durango Shaker concept: A 392 V8 in front of six Viper seats

When done right, a parts-bin special can be a beautiful thing. This Dodge Durango Shaker concept for the 2016 SEMA show is one such vehicle, and it's easily our favorite Mopar debuting in Vegas. The key, of course, is pulling from the right bins. Take a tour and you'll see Charger, Challenger, and Viper pieces grafted onto this slick crossover. The featured special part is the big, 6.4-liter 392 Hemi V8 that's been dropped under the hood; it's sourced from the SRT Challenger and Charger where it makes 485 horsepower and 475 pound-feet of torque. With that in place, the fabricators cut a big hole in that hood for the Challenger's awesome optional shaker scoop. It wasn't an easy installation; it required a custom spacer for the intake to make sure everything lined up with the hole properly. View 17 Photos Apparently there were some Viper seats lying around, so six of them were stuck into this Durango. Makes sense. It does lose a bit of people-carrying capability as a result, since only two seats fit in each row, and the seats don't fold for extra cargo room. A Dodge spokesperson attested to the fact that all three rows are usable, if not totally comfortable. But then stock third-row seats aren't always that comfortable anyway. Seriously, though, Viper seats. We don't care how comfortable or usable the result is. Although you might not give it a second thought, even the fuel filler needed some special attention. This piece was also lifted from a Dodge Challenger, and it was taken along with the surrounding sheet metal. Because of the different orientation of the filler cover on the Challenger, the builders decided the easiest way to get it to fit was to chop the fuel filler section out and weld it onto the Durango. The designers also put a little blue Stig on the cover. And those are just the cool parts that were hard to install. This Durango features plenty of other slick details, like the custom bumpers, fender flares, and side skirts. Everything is painted B5 Blue with matte black and carbon accents all around. Up front, the bumper hides a pair of fog lights stolen from a Challenger Hellcat – and yes, they're the ones with intakes in the middle. The grille is also a custom piece, losing the standard crosshair design for better airflow. The fender flares cover up some seriously wide, 305-section tires at all four corners, which are hauled down by Hellcat brakes. The rear bumper bumper contains a stylish center-exit exhaust with dual tips.