2000 Dodge Viper Gts on 2040-cars

Auto blog

2020 Dodge Challenger celebrates 50th anniversary with a golden special edition

Next year will mark the 50th anniversary of the original Dodge Challenger. And obviously Dodge wouldn't let that significant date go by without a special version of the 2020 Dodge Challenger. Meet the limited production Dodge Challenger 50th Anniversary Edition. The package is offered on the V6-powered GT with rear-wheel drive, as well as the R/T, R/T Scat Pack and R/T Scat Pack Widebody. The Hellcat and Hellcat Redeye are left out, but every 2020 example will get special 50th Anniversary badges to make up for that. On the outside, the package features a matte black hood, roof and trunk lid. V8 models get a body-color Shaker scoop. This marks the first time the Shaker scoop has been available on a Widebody Challenger. Despite having a Shaker scoop, the special edition cars also get the air intake headlights pioneered by the Hellcat, and they have a "50" printed on them to go with the other 50th Anniversary badging. All models get 20-inch wheels. These are finished in what Dodge calls "Gold School." These Challengers can be painted in one of seven colors: Frostbite, Hellraisin, Sinamon Stick, Go Mango, TorRed, F8 Green or the all-new Gold Rush. Inside the Challenger 50th Anniversary Edition are Nappa leather and Alcantara-covered seats and "Sepia" stitching and embroidery. It's all matched by carbon fiber trim with copper threads woven into it. The instrument cluster and the air vent badge are finished in the car's exterior color. Dodge will build only 70 of each model in each color as a tribute to the original car's 1970 model year. This means that there will be 490 GTs, 490 R/Ts, 490 R/T Scat Packs and 490 R/T Scat Pack Widebody models for a grand total of 1,960 cars. Each model has a different price for the 50th Anniversary package. It costs $4,995 for the GT, $5,495 for the R/T, and $5,995 for the Scat Pack models. The cars go on sale this coming spring.

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

2 men die in Dodge Challenger Hellcat crash at Colorado airport

Two friends died in the crash of a Dodge Challenger Hellcat over the weekend after they shot off the end of an airport runway, authorities said. That someone died in a 707-horsepower Hellcat is, sadly, not unexpected. But two aspects of the story are remarkable. First, the men's ages: The Denver Post reports the crash victims were Lynd Fitzgerald, 71, of Colorado Springs, and his passenger, Roger Lichtenberger, 76, of San Marcos, Calif. Second, their speed: The car was likely moving at over 100 miles per hour, authorities said. The men had permission to use the 8,300-foot runway at Central Colorado Regional Airport in Buena Vista. That's more than a mile and a half long. But when the car left the runway, it went 300 feet before flying over a ravine, hitting the ground, becoming airborne again, flipping end over end across a second ravine, and ultimately landing on its wheels 650 feet past the end of the pavement. Responding police officers tried to provide first aid, but the men were declared dead at the scene. "They were just test-driving this car. They went a little too fast. I don't want to surmise. ... They probably got to the end of the runway and, at that speed, didn't realize they were there so fast. And they lost control. It was just too high a speed and they got to the end of the runway," said Chaffee County Sheriff John Spezze. There were skid marks near the end of the runway, but the sheriff didn't know the length. "I've never seen anything like it," Spezze told the newspaper. "They had permission to be there. There were no laws broken." Related Video: