1998 Dodge Viper Gts Coupe 2-door 8.0l on 2040-cars

Auto blog

NHTSA investigating power modules on Chrysler Group SUVs and minivans

The Center for Auto Safety is officially petitioning the National Highway Traffic Safety Administration to begin scrutinizing alleged problems with the totally integrated power module (TIPM) on about 24 Chrysler Group SUVs and minivans. The advocacy group claims that the part's failure can cause affected vehicles to stall or not start at all. NHTSA is still looking into the accusations and deciding whether a full investigation is actually warranted.
The CAS petition claims at least 70 TIPM failures, but according to NHTSA, six of the complaints are for models that don't have the modules. In 34 of the reported cases, the vehicles refused to start, and in 17 of them the engine stalled. There were also two allegations of smoke and one of a fire. However, none of these affected airbag deployment or resulted in a crash.
This petition isn't the first TIPM-related problem for Chrysler Group. A recent report in the New York Times alleged that it found 240 complaints potentially related to the issue on NHTSA's website alone. In September, the automaker also recalled 230,760 examples worldwide (188,723 in the US) of the 2011 Jeep Grand Cherokee and Dodge Durango replace the fuel pump relay circuit inside of the TIPM-7 with one external to the unit. The original part could allegedly cause the models to stall without warning. Even earlier, the company also recalled about 80,000 examples of the Jeep Wrangler and Dodge Nitro in 2007 to have the module reprogrammed.

Some dealers asking $100,000-plus for Daytona-edition Dodge Charger SRT Hellcats

If you thought the name of the 2020 Dodge Charger SRT Hellcat Widebody Daytona 50th Anniversary Edition was a lot to swallow, then you're definitely going to choke on what some dealers are asking for the privilege of owning one. The $4,495 package is commanding as much as $25,000 in "market adjustments" from stores looking to capitalize on the rarity of this extremely limited-edition model.  The folks over at Moparinsiders.com reported Friday that some dealers are asking Demon-level prices for their limited allocations of the commemorative package. Their assessment? Not worth it. We're inclined to agree.  The Daytona 50th Anniversary Edition package is, fundamentally at least, little more than a set of stickers, a dash plaque and a tiny bump in horsepower. What you really get for your money is exclusivity. Only 501 were built (to commemorate the number of production units required to homologate the original Charger Daytona for NASCAR racing); just 451 went to U.S. dealers. The other 50 were reserved for Canada.  To be fair, no variant of the 2020 Charger SRT Hellcat Widebody even approaches the definition of "inexpensive." Just to get behind the wheel of the newest edition to the Charger lineup will set you back at least $71,000. The Widebody package is more than just a set of custom fenders. The Hellcat also gets another 1.6 inches of track width and some extra rubber on the road. SRT engineers also increased the Hellcat’s front spring rate by 32% and beefed up its sway bars (from 19 mm to 21.7 mm in the front and from 32 mm to 34 mm in the rear). The adaptive suspension was firmed up a little bit across the board too for crisper response over road imperfections. Plus, you know, there's that 707-horsepower, supercharged, 6.2-liter engine. The Daytona gets an extra 10 ponies, right? Well, sort of, anyway. SRT rated its output at a slightly higher engine speed. Between us, it's the same thing.  So, there's a silver lining: You don't have to spend $100,000 for a 2020 Charger Widebody Hellcat if you don't want to, but somebody probably will.  Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.    

2018 Dodge Challenger Demon, 1970 Charger become Lego cars

As much as we all would have loved to buy one, Dodge made sure that it wouldn't be easy for everyone to own a 2018 Dodge Challenger SRT Demon. It was only built for one model year, with a total of 3,000 units, and the last one was built last summer. And even if they were still available, each one started at just under $85,000, a substantial chunk of change. But thanks to Lego, there's a comparatively cheap way to get a new Demon: in tiny brick form. The toy company has added another kit to its Speed Champions line featuring a yellow Challenger Demon. Since the Speed Champions cars are quite small, it's a somewhat rough facsimile of the car, but it's still instantly recognizable. It's blocky, it has a big hood scoop and fat fender flares. It also has two sets of wheel covers to customize it. This kit has an advantage over a real Demon, too: it comes with a second car. The other one is a 1970 Dodge Charger in black. This is an even more faithful rendition, thanks in part to the real car's ruler-straight lines. It doesn't have customizable wheels, but you can choose whether to leave it stock, or stick on a little replica of a supercharger and hood scoop that poke through the hood. It ends up looking like Dominic Toretto's Charger from The Fast and the Furious. Besides the second car, the kit features a drag strip starting tree. It doesn't light up, but it does have a slider on the back that lifts up each set of colored bricks as it's pressed down. So you can have little drag races with the two cars. In total, everything is built with 478 pieces, and it will cost you $29.99. The kit is available now wherever Lego kits are sold, and even at the Dodge merchandise website. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.