2006 Sxt Clean Car 2.7l V6 24v Fwd Sedan Ny Nj Pa Ct on 2040-cars

Auto blog

Dodge Grand Caravan to live in fleets through 2017

After a hard-working career of hauling around families for decades, the Dodge Grand Caravan name was set to retire in 2016 under FCA's five-year plan for the US. The decision would have put all of the automaker's focus behind the next-generation Chrysler Town & Country, but that original strategy might have changed. Now, Dodge's minivan may have to work just a few more years before it can finally shuffle off. There are set to be 2016 and 2017 model year examples of the current Grand Caravan, according to an internal FCA production document obtained by Automotive News. This report suggests no changes in the minivan between those two years, and there's no mention of the company's intentions deeper into the future. "While we've announced the Grand Caravan will eventually be the minivan that goes away, we're not going into more detail at this time," a Dodge spokesperson said to AN. For the next Town & Country, production would start in Windsor, Ontario, in late February 2016. This document also suggests a brief run of 2016 Chrysler minivans based on the current model from August 2015 until February 2016. Automotive News speculates that the reprieve for the Grand Caravan could allow that model to focus on fleets and the Canadian market while the new Town and Country gets up and running. The latest generation T&C will reportedly debut at the 2016 Detroit Auto Show and will possibly carry a higher price to befit a vehicle with a more modern platform and improved tech.

The Dodge Demon isn't the only way to a 10-second quarter mile

The Demon's rear tires smoke, the front tires lift – and in under ten seconds (after having spent $85,000) you've covered a quarter mile. In short, we fully get the attention shown Dodge's SRT Demonstrator. With disruption the operative word of the times, it's good to see a representative of the movement coming from Detroit. The SRT Demon delivers disruption in spades. There is, however, a viable alternative – and it doesn't require getting on the list at your Dodge dealer. If you want to do 0-60 in under three seconds or the quarter mile in around 10, the folks at Honda, Kawasaki, Suzuki and Yamaha – with any of their one-liter superbikes – have you covered. The gestation of what we now know as the superbike came roughly a decade after the debut of the muscle car. It was in the early '70s, as emission and safety regulations – along with rising insurance premiums – decimated the ranks of Detroit's fastest that motorcycle makers found their magical, almost mystical momentum. Honda's CB750 four was arguably the first, followed soon by Kawasaki's Mach III and Z-1. After that, it was Katie-bar-the-door, with more horsepower offered by Japanese OEMs until, invariably, insurance premiums went higher and, during the last recession, 20-somethings couldn't get affordable loans or insurance. Today, Japan's Big Four are once again engaged in a horsepower war, fueled by the rising interest in MotoGP, along with the rising profits available when selling a $20,000 motorcycle. And if that $20,000 - $10K per wheel – seems high, simple math tells you it's less than half of what you'll spend per corner if buying Dodge's Demon. The specs tell the tale. The Demon, fattened by both its flared fenders and a platform dating from the George Bush administration, supports its 4,200+ pounds on a wheelbase of 116 inches. That's in contrast to Suzuki's GSX-R1000 – redesigned for 2017 – which puts its 443 pounds atop a wheelbase of just 56 inches. To maximize its Hemi-supplied 800+ horsepower, Dodge diverts the air conditioning from the Demon's interior to the engine, which makes racing on a summer evening (you guessed it) devilishly hot. On Suzuki's GSX-R1000 – or similarly-equipped superbikes – almost all of the air at 100+ miles per hour is directed at you. To further underscore the differences, know that the GSX-R1000 and its like-minded competition can turn a quick corner, while the Demon is hard-pressed to execute a U-turn at the end of a quarter-mile straightaway.

That thing got a Hemi? Mopar engine kits make it easier to say yes

Thanks to a new kit from Mopar, classic car owners will have an easier time dropping Hemis into their muscle cars. The kit works with Mopar's 345 and 392 Hemi engines (5.7 and 6.4 liters respectively) and with cars built before 1975. The kit will run $1,795 and has everything needed to get one of the above engines running. The parts include a power distribution system, engine computer, engine and chassis wiring harnesses, O2 and intake air temperature sensors, ground wiring and a gas pedal. The kit is also designed to work with a manual transmission, but Mopar says a transmission such as the Torqueflite 727 and 904 can be made to work with the system. As for examples of the kit in action, take a look at the Jeep CJ66 and Dodge Challenger Shakedown that Mopar revealed this week at the SEMA show. Mopar also offers a few other parts to help complete the project, including various oil pans to clear subframes, a set of headers, and accessory drives for power steering and air conditioning. All of these parts are extra cost though. You'll also need an engine, and the 345 starts at $6,070, and the 392 runs $9,335. However, if you happen to already have one from 2014 or newer, that will work, too. Muscle car fans are getting more choices for their engine conversions. Chevrolet Performance already sells crate engines with "Connect and Cruise" kits to get its engines working in classic cars. The General also offers it with more engines. However, for people who want to keep a Mopar engine in their classic Chrysler, Dodge, Plymouth, or Jeep, this is a cool new option. Related Video: Featured Gallery Mopar Hemi V8 Engine Swap Kit Image Credit: FCA Aftermarket SEMA Show Chrysler Dodge Performance Classics FCA engine swap SEMA 2016