2001 Dodge Stratus Rt 74248 Miles Leather Moonroof Automatic Chrome Rims on 2040-cars

Auto blog

Dodge recalls 173 Chargers and Challengers for front wheels that don't fit correctly

Dodge is recalling 173 Challengers and Chargers because they’re equipped with an incompatible front wheel and brake package. All the vehicles are 2019 model year cars built between May 28 and September 25 this year, according to the official NHTSA documents. The wheels donÂ’t provide enough clearance from suspension and brake components, Dodge says. ThereÂ’s a chance that the tireÂ’s inner sidewall will make contact with the steering knuckle. When the tire hits the steering knuckle, it could end up damaging the tire, causing a “sudden loss of tire air pressure.” This, of course, is not what you want out of a tire. Predictably, FCA says this could result in a crash without prior warning. To fix the problem, your local Dodge dealer will be installing the wheels that shouldÂ’ve been equipped on the car in the first place. FCA continues: “Also, for customer satisfaction, replace the rear wheels to match the front wheels.” We were wondering if the rear wheels would come into play here, and it looks like Dodge wonÂ’t be leaving anyone out to dry with mismatched front and rear wheels. The wheels in question are described as “Mid Gloss Black Wheel.” Check your window sticker (or wait for the official mailing) to see if you have those wheels on your Charger or Challenger. Unfortunately, FCA doesnÂ’t detail which trims of Charger and Challenger are affected in its recall notice. The company also makes it clear that this recall is due to “an engineering release error” and not a wheel defect. This particular wheel and brake package shouldÂ’ve never been offered as an option from the factory. Look out for a notice in early December, as FCA says it will begin notifying owners around December 13 this year. As of now, there are no reported injuries or accidents due to the issue.

2020 Dodge Challenger Drag Pak comes solely with supercharged power

The Dodge Challenger Drag Pak has returned for 2020, five years after the last one arrived, and two years after it began development. And while in many ways it looks like past Drag Paks, there are a number of tweaks that should make this the fastest and most capable factory drag car yet from Mopar. Unlike the last model, only a supercharged 354-cubic-inch (5.8-liter for the imperically challenged) V8 is available. Mopar says it's more powerful than its predecessor, though exact horsepower wasn't given. It did confirm that the previous car was capable of a stunning 1,200 horsepower. The engine is coupled solely to a three-speed automatic transmission with a manual shifter. 2020 Dodge Challenger Drag Pak View 17 Photos Supporting the massive engine are many chassis, suspension and driveline enhancements. The independent rear suspension and axles are gone in favor of a solid axle from Strange and a four-link suspension. The front remains stock except for double-adjustable Bilstein shocks. The engine is mounted to a subframe member that's beneficial both to weight distribution and center of gravity. The car gets high-performance brakes and custom Weld Racing wheels with "DRAGPAK" engraved on them. The interior features a welded-in roll cage certified for quarter-mile times as quick as 7.5 seconds. Helping keep the car planted without increasing drag too much are front and rear spoilers from the road-going Challenger, a new addition compared with the previous car. Every Drag Pak car also comes standard with a wheelie bar and parachute. Dodge will only build 50 of these cars, and they'll only be offered as race cars that aren't legal for the street. The cars will be eligible for competing in sportsman classes in NHRA and NMCA drag racing series. Pricing and availability hasn't been set yet, but will be revealed sometime next year.

Hennessey Dodge Demon sets hellishly fast quarter-mile time

The Dodge Demon doesn't strike us as a muscle car much in need of a performance makeover. After all, this 840-horsepower MoPar machine's voracious quest for straight-line speed means it trims weight by jettisoning everything from a front passenger seat and rear seat, to its stereo and all carpeting in the trunk. The folks at Hennessey apparently think that's not nearly extreme enough. So, the Texas-based tuning outfit has turned the Demon into a 1,035-horsepower mega beast that runs a quarter-mile in 9.14 seconds at 152 mph. That's fast, really fast. In fact, the HPE1000 is now the world's fastest Dodge Demon, having set its record-setting pace at Lonestar Motorsports Park on May 8. "The 2018 Demon is a street-legal rocket from Dodge, but we wanted to take the car's impressive track times to an industry leading level." said president and company founder, John Hennessey. For comparison, the stock Dodge Demon is credited with running the quarter-mile in 9.65 seconds at 140 mph. The main HPE1000 modification involves replacing the stock 2.7-liter supercharger with one that's a staggering 4.5-liters in capacity. Also included in the Hennessey toy-chest are stainless steel long tube headers, a high-flow air induction system, upgraded throttle body, upgraded fuel pump and fuel injectors, along with custom engine management calibration. When all is said and done, the HPE1000 Dodge Demon delivers a total of 1,035 horsepower at 6,500 rpm and 948 pound-feet of torque at 4,200 rpm. While the standard Demon accelerates from 0-60 mph in only 2.3 seconds, the Hennessey variant trims this down to only 1.9 seconds. That's quick enough to make a Bugatti Chiron blush. Hennessey hasn't stated what all this will cost, though the company did say production of these devilishly fast Demons will be limited to only 50 examples. Customers also receive a 1-year/12,000-mile warranty, which seems a nice touch for a car that's downright scary with its performance specs. Related Video: Featured Gallery Dodge Demon Hennessey HPE1000 View 30 Photos Aftermarket Dodge Coupe Performance supercharger Hennessey dodge demon quarter mile demon