2008 Dodge Sprinter 2500 Base Standard Cargo Van 3-door 3.0l on 2040-cars

Auto blog

Dodge Durango Shaker concept: A 392 V8 in front of six Viper seats

When done right, a parts-bin special can be a beautiful thing. This Dodge Durango Shaker concept for the 2016 SEMA show is one such vehicle, and it's easily our favorite Mopar debuting in Vegas. The key, of course, is pulling from the right bins. Take a tour and you'll see Charger, Challenger, and Viper pieces grafted onto this slick crossover. The featured special part is the big, 6.4-liter 392 Hemi V8 that's been dropped under the hood; it's sourced from the SRT Challenger and Charger where it makes 485 horsepower and 475 pound-feet of torque. With that in place, the fabricators cut a big hole in that hood for the Challenger's awesome optional shaker scoop. It wasn't an easy installation; it required a custom spacer for the intake to make sure everything lined up with the hole properly. View 17 Photos Apparently there were some Viper seats lying around, so six of them were stuck into this Durango. Makes sense. It does lose a bit of people-carrying capability as a result, since only two seats fit in each row, and the seats don't fold for extra cargo room. A Dodge spokesperson attested to the fact that all three rows are usable, if not totally comfortable. But then stock third-row seats aren't always that comfortable anyway. Seriously, though, Viper seats. We don't care how comfortable or usable the result is. Although you might not give it a second thought, even the fuel filler needed some special attention. This piece was also lifted from a Dodge Challenger, and it was taken along with the surrounding sheet metal. Because of the different orientation of the filler cover on the Challenger, the builders decided the easiest way to get it to fit was to chop the fuel filler section out and weld it onto the Durango. The designers also put a little blue Stig on the cover. And those are just the cool parts that were hard to install. This Durango features plenty of other slick details, like the custom bumpers, fender flares, and side skirts. Everything is painted B5 Blue with matte black and carbon accents all around. Up front, the bumper hides a pair of fog lights stolen from a Challenger Hellcat – and yes, they're the ones with intakes in the middle. The grille is also a custom piece, losing the standard crosshair design for better airflow. The fender flares cover up some seriously wide, 305-section tires at all four corners, which are hauled down by Hellcat brakes. The rear bumper bumper contains a stylish center-exit exhaust with dual tips.

Values snowball for legendary Tucker Sno-Cats, latest toys of the super rich

Here's a fun-sounding vehicle perfect for the cold and snow that's currently gripping much of North America. Tucker — no, not that Tucker — just marked its 75th anniversary making the Sno-Cat, its orange-painted, four-tread snow vehicles that have inspired backcountry skiers, collectors — and increasingly, the super rich. Bloomberg in a recent story writes that demand for the Medford, Ore.-based company's products is soaring on demand from the wealthy, who need a way to get to their backcountry mountain retreats. They're also in demand from collectors and gearheads who also love snow, like two anonymous collectors who are believed to have amassed more than 200 vintage Sno-Cats. The value of vintage models has reportedly tripled in the past five years to well over $100,000 for a fully restored rig. Tucker Sno-Cat Corp. claims to be the world's oldest surviving snow vehicle manufacturer, launched by E.M. Tucker in 1942 out of a desire to design a vehicle for traveling over the kind of deep, soft snow found in the Rogue River Valley of his childhood. It was four Tucker Sno-Cat machines that helped English explorer Vivian Fuchs and his 12-man party make the first 2,158-mile overland crossing of Antarctica in 1957-58. While many of the company's competitors either shuttered or adapted to serving ski resorts with wider, heavier treads, Tucker has stuck to its formula of making lightweight vehicles to travel over deep snow. Many Tuckers use Chrysler's flat six-cylinder engine, or its Dodge Hemi V8 for larger Sno-Cats, mounted rear or centrally, with basic, no-frills aluminum cabins. Sno-Cats all have four articulating tracks that are independently sprung, powered and pivoted at the drive axle. Track options come in three different types: conventional steel grouser belt track, rubber-coated aluminum grouser belt track, and one-piece all-rubber track. Steering is hydraulically controlled by pivoting the front and rear axles for smooth movement over undulating terrain with minimal disturbance of the ground cover. The company today makes 75 to 100 Sno-Cats a year for customers including the U.S. military, oil-drilling crews in cold places like Alaska and North Dakota, and utilities. But demand is so high that it's launched a profitable service reselling and refurbishing old machines. E.M. Tucker's grandson, Jeff McNeil, now head of this division, scours Google Earth for abandoned Sno-Cats rusting in backyards that he might be able to acquire and fix up.

2018 Dodge Challenger SRT Hellcat Widebody First Drive | Same snarl, more bite

By now, you've read a lot about the Dodge Demon, including our driving impressions from the drag strip. You've also heard a lot about the Challenger Hellcat, which we've had the pleasure of driving at Portland International Raceway, Willow Springs, and on our home turf of Woodward Avenue, both during the Dream Cruise and for an episode of AutoblogVR. Last week, Dodge and SRT invited us out to Indianapolis to sample the Demon, as well as the Durango SRT. Sandwiched between those two launches, however, was another distillation of Dodge's retro-cool coupe, the 2018 Challenger SRT Hellcat Widebody. The Widebody shares most of the guts of the standard Charger Hellcat, but went to the same cosmetic surgeon as the Demon. The Hellcat 6.2-Liter V8 with 2.4-liter-per-rev supercharger, producing 707 horsepower and 650 pound-feet of torque, is unchanged. It comes standard with a six-speed manual transmission, but our tester had the optional eight-speed automatic with steering wheel-mounted paddle shifters. It's 3.5 inches wider (look at those fenders!) than the standard Hellcat, though, which allows it to accommodate 20-by-11-inch "Devil's Rim" wheels. It shares its front splitter with the Demon, but retains the Hellcat's rear spoiler. The Widebody also features an electronic power steering system with selectable drive modes. It just slightly outperforms the standard Hellcat, as well, with better cornering grip, improved acceleration, and better braking (even though it shares the same Brembo brake package as the standard Hellcat). Dodge claims that the Widebody does the quarter-mile 0.3 seconds quicker, dropping it just out of the 11s to 10.9 seconds. 0-60 miles per hour drops from 3.5 to 3.4 seconds. Lateral grip increases by 0.04 G to 0.97 G on the skid pad. On the company's 1.7-mile road course, Dodge says the Widebody drops two seconds off its lap time compared to the standard Hellcat, finishing about 13 car lengths ahead. We spent our time with the Hellcat Widebody on the infield road course at Indianapolis Motor Speedway. Sliding into the car, the seating position is cozy and comfortable even with a helmet on, and we have no trouble adjusting our chair and steering column to ideal placement. The infotainment display shows us our drive settings for the next few miles: the transmission and suspension are in Track Mode, steering is set to Sport, with traction set to Street. We fire up the car with an instructor in the right seat, and head out of the pit lane.