2007 Dodge Sprinter 2500 Base Standard Cargo Van 3-door 3.0l on 2040-cars

Auto blog

All hail the Hellephant, Mopar's 1,000-horsepower crate engine

It's shocking to say this, but the all-powerful Dodge Demon looks weak now that Mopar has unleashed the Hellephant. This crate motor makes 1,000 horsepower and 950 pound-feet of torque, and its name is a combination of the nickname for the old 426-cubic-inch Hemi V8 and, obviously, the Hellcat. This monster is a 426-cubic-inch version of the current third-generation Hemi V8 topped by a supercharger similar to what the Hellcat line packs. Everything is cranked up to — or perhaps, past — 11. The engine block is made of aluminum and weighs 100 pounds less than the equivalent iron block. All of the internals are forged. The stroke and bore have been increased. The supercharger produces 15 pounds of boost and displaces 3 liters; more than the 2.7-liter blower on the Demon and the 2.4-liter blower on the Hellcat. And as big and powerful as it is, it will still rev to 7,000 rpm. It's a thoroughly monstrous motor, but shockingly, it won't be that difficult to live with. For one thing, Mopar will offer a complete kit to get the engine up and running, including an engine computer, wiring harness and drive-by-wire throttle. It also runs on 93-octane pump gas. That's especially amazing considering the Demon engine "only" makes 840 horsepower, and that's on race gas with 100+ octane fuel. It also has us wondering what the Hellephant could make on racing fuel. The Mopar folks did say that there's room to add more power. Pricing wasn't announced for the Hellephant engine. The Hellcat crate engine retails at $19,350 directly from Mopar, so it's safe to assume that the Hellephant will go for more. The installation kit with the computer and harness will be an extra charge of likely over $2,000, based on the Hellcat kit. The engine and the kit will be available in the first quarter of 2019. Related Video: Featured Gallery Hellephant Crate Engine SEMA Show Chrysler Dodge Jeep RAM Performance dodge demon hellephant

Dodge Demon lightweight by SpeedKore Performance comes to SEMA

We already know that the Dodge Demon is crazy fast. We experienced that firsthand. But its more than ample amounts of built-in speed doesn't mean that owners won't be tinkering with it to make it faster. But if you don't want to add more power (or even if you do), you can always make the car lighter. That's what SpeedKore Performance Group has done, and it will bring its lightweight carbon fiber Dodge Challenger SRT Demon to the SEMA show in Las Vegas, where it will be introduced by none other than rock legend Sammy Hagar. Last year, SpeedKore brought its carbon fiber-bodied Dodge Challenger SRT Hellcat to SEMA, and now it has applied the same treatment to the 840-horsepower Demon. The body panels and spoilers will be manufactured using SpeedKore's autoclave in Grafton, Wisconsin. SpeedKore will also be one of many companies bringing a modified Ford Mustang to SEMA. A carbon-bodied Ford Shelby GT350R by SpeedKore was recently featured on "Jay Leno's Garage." Last year, Leno also drove SpeedKore's 1970 Dodge Charger Tantrum, which features a carbon fiber front end and a 1,650-horsepower Mercury Marine engine. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery Speedkore Dodge Challenger SRT Demon: SEMA 2017 View 13 Photos Related Gallery SpeedKore Performance 2018 Dodge Challenger SRT Demon News Source: SpeedKore Performance GroupImage Credit: Live photos copyright 2017 Drew Phillips / Autoblog.com Aftermarket Celebrities SEMA Show Dodge Coupe Lightweight Vehicles Performance dodge demon dodge challenger srt demon SEMA 2017 speedkore performance

2 men die in Dodge Challenger Hellcat crash at Colorado airport

Two friends died in the crash of a Dodge Challenger Hellcat over the weekend after they shot off the end of an airport runway, authorities said. That someone died in a 707-horsepower Hellcat is, sadly, not unexpected. But two aspects of the story are remarkable. First, the men's ages: The Denver Post reports the crash victims were Lynd Fitzgerald, 71, of Colorado Springs, and his passenger, Roger Lichtenberger, 76, of San Marcos, Calif. Second, their speed: The car was likely moving at over 100 miles per hour, authorities said. The men had permission to use the 8,300-foot runway at Central Colorado Regional Airport in Buena Vista. That's more than a mile and a half long. But when the car left the runway, it went 300 feet before flying over a ravine, hitting the ground, becoming airborne again, flipping end over end across a second ravine, and ultimately landing on its wheels 650 feet past the end of the pavement. Responding police officers tried to provide first aid, but the men were declared dead at the scene. "They were just test-driving this car. They went a little too fast. I don't want to surmise. ... They probably got to the end of the runway and, at that speed, didn't realize they were there so fast. And they lost control. It was just too high a speed and they got to the end of the runway," said Chaffee County Sheriff John Spezze. There were skid marks near the end of the runway, but the sheriff didn't know the length. "I've never seen anything like it," Spezze told the newspaper. "They had permission to be there. There were no laws broken." Related Video: