2007 Dodge Sprinter 2500 Base Standard Cargo Van 3-door 3.0l on 2040-cars

Auto blog

NHTSA closes investigation on 4.7M FCA power modules, no recall

FCA US hasn't had the best time with recalls as of late. Not only did the company recently agree to greater safety oversight and paid $105 million to the government, that came just days after hacking fears prompted a 1.4-million model recall campaign. However, a recent decision to close an investigation by the National Highway Traffic Safety Administration means that the automaker doesn't have to worry about another major recall possibly affecting 4.7 million vehicles, according to the agency's report (as a PDF). Last September, the Center for Auto Safety petitioned NHTSA to investigate an alleged problem with the totally integrated power module (TIPM) on these FCA US models. The group claimed that a fault with the component could cause a variety of maladies, including stalls, not starting, catching fire, unintended acceleration, and airbag non-deployment. At the time, it also submitted 70 cases where this had reportedly happened. According to NHTSA, "no valid evidence was presented in support of claims related to airbag non-deployment, unintended acceleration, or fire resulting from TIPM faults and these claims were found to be wholly without merit based on review of the field data and design of the relevant systems and components." The agency did find signs of an issue with the fuel pump relay in some Jeep Grand Cherokees and Dodge Durangos, but FCA US issued recalls for the problem in September 2014 and February 2015. Without anything else to go on, the Feds don't think it's worth investigating this topic any more.

Dodge Hornet supposedly snapped inside Alfa Romeo Tonale factory

It appears that someone in Stellantis' Pomigliano d’Arco Assembly Plant in Italy couldn't keep their cellphone to themselves. Video uploaded to the Alfa Romeo Club Italia Facebook page, then quickly removed, purports to show Dodge's brand-engineered version of the Alfa Romeo Tonale in the same factory where the Alfa will be built. The Dodge is expected to be called the Hornet, and there are a few differences between it and and Alfa Romeo, which is understandable. But if the screenshots on Twitter are accurate, then the Dodge looks a lot closer to the Alfa Romeo than perhaps anyone expected. The front fascia and hood fall in line with Dodge's design language. The Alfa grille is replaced by a narrow, stepped upper grille, and the hood is one of the vented units similar to those available for Dodge's R/T performance trims. And as Mopar Insiders noticed, the silhouette of this car's front end matches a vehicle silhouette Dodge showed during Stellantis' 2021 EV Day.   Inside, the Italian brand's crest in the steering wheel center cap is replaced by Dodge's twin slashes, and the steering wheel has been stripped of the large, curved paddle shifters the Tonale showed on its debut. There's still a start/stop button on the steering wheel, but where the Tonale has a driving mode dial on its dash, this supposed Hornet has another start/stop button. Dodge's push-to-start buttons are usually on the instrument panel, so our guess is that the wheel is a holdover for testing. On the center tunnel, the parking alert buttons and Italian Tricolore flag on the Alfa Romeo are replaced by three different buttons.   We've known Dodge has two electrified vehicles on the way, and the Hornet name has been low-key buzzing for two years. Fiat Chrysler applied to trademark the name in the U.S. in March 2020; at the time, it was thought a vehicle with that name could replace the Journey. In 2021, a July rumor out of Italy was the first whisper of the Hornet name being attached to the Alfa Romeo Tonale. In August, when Stellantis CEO Carlos Tavares said Dodge would get a PHEV in 2024, watchers pegged that model as the Hornet. That hybrid powertrain would show a year after the vehicle's launch, the Hornet anticipated as a 2023 model with the Tonale's turbocharged 2.0-liter four-cylinder. That engine could get the same 256 horsepower and 295 pound-feet of torque as the Tonale, or be boosted to satisfy Dodge's performance credentials.

Here's the last Dodge Viper

The last Dodge Viper has rolled off the line. Ralph Gilles, FCA's Head of Design since April 2015, posted a photo gallery on Instagram with the caption "So long... #Viper." The gallery includes multiple photos of the Conner Avenue Assembly Plant in Detroit, where the Dodge Viper has been built since 1995. In the gallery, we see a yellow unit with black stripes coming down the line, and Gilles is posing in front of it with Dodge/SRT Head of Design Mark Trostle. The yellow Viper is followed by a red car, with nothing else behind it on the line. That red Viper is "the ultimate last one," according to Gilles, adding that the automaker will be holding onto that unit for the company's heritage collection. You can click through the gallery here: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. When asked in the comments if the Viper was discontinued because of low sales, Gilles replied, "Not really as it sold well over the last couple of years at a great mix of mostly ACRs in the last 15 months. It has more to do with a new ejection mitigation regulation airbag that simply won't fit in our package." Despite the solemnity of the post, Gilles is upbeat about the Viper in general, saying "The Gen5 had a great 5 model year run and the Viper platform which has not changed that much over the years had a great 25 year run!" He says he has great memories with the car, and that "they are relatively robust so they will be around making memories for generations to come!" Still, we hope to see something that lives up to the Viper's wild, raw spirit come from FCA in the near future. Related Video: Related Gallery Roadkill Nights Dodge Vipers 2017 View 40 Photos News Source: Instagram: @ralphgilles Plants/Manufacturing Dodge Automotive History Coupe Performance Supercars FCA viper