2006 Dodge Sprinter 2500 Base Standard Passenger Van 3-door 2.7l on 2040-cars

Auto blog

NHTSA investigates FCA for SUVs that roll out of Park

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2014 Dodge Durango and 2014-205 Jeep Grand Cherokee after 14 complaints of the SUVs rolling out of Park. An estimated 408,000 of them could be affected, if a recall is necessary. All of the current complaints submitted to NHTSA about the issue concern the Grand Cherokee, and the claims allege that the SUV can roll out of Park whether or not the engine is running. Some folks report that they check the indicator each time because the gear sometimes fails to engage. Among the 14 cases, there are five accounts of crashes and three injuries, including a situation with someone allegedly being rolled over. NHTSA's preliminary evaluations are meant to investigate "the scope, frequency, and safety-related consequence" of a reported problem. They don't necessarily lead to a recall. Related Video: INVESTIGATION Subject : Unattended vehicle rollaway Date Investigation Opened: AUG 20, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15030 Component(s): POWER TRAIN All Products Associated with this Investigation Vehicle Make Model Model Year(s) DODGE DURANGO 2014 JEEP GRAND CHEROKEE 2014-2015 Details Manufacturer: Chrysler (FCA US LLC) SUMMARY: The Office of Defects Investigation (ODI) has received 14 complaints (VOQs) alleging that after being placed in Park the subject vehicles have then rolled away from their parked position. The unintended motion has occurred with both the engine off and the engine running. ODI has also identified EWR field report data related to the alleged defect. The model year 2014 and 2015 Jeep Grand Cherokee vehicles are equipped with an electronic gear selector (shift-by-wire system). The gear selection is made by pressing the shifter-paddle forward or backwards; the shifter does not move along a gate path as with conventional gear selectors. A Preliminary Evaluation has been opened to asses the scope, frequency, and safety-related consequence of the alleged defect. The VOQs associated with the opening of this investigation are: 10733158, 10730952, 10683556, 10679497, 10583366, 10725429, 10715401, 10711893, 10676998, 10668651, 10662619, 10662308, 10605865, and 10567538.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

NHTSA probing Ram recall pace, communication

The National Highway Traffic Safety Administration has announced that it's looking into Chrysler Group's handling of a pair of recalls affecting roughly one million Ram pickup trucks. Reuters is reporting that the regulatory agency is focusing on the availability (or lack thereof) of parts and "poor communications" from the automaker in its investigation.
"Customers have been advised in accordance with the regulations governing recalls," Chrysler spokesman Eric Mayne told Reuters via email. "We are continually replenishing our supply of replacement parts. Chrysler Group regrets any inconvenience our customers may have experienced."
NHTSA disagrees, arguing that the recalls, which affect 972,000 trucks from 2003 to 2012, are being delayed by the lack of parts.