2006 Dodge Daimler Chrysler Sprinter Passenger Van 2500 Mercedes 140 Wb 2.7l on 2040-cars

Auto blog

Dodge Scat Packages add Mopar performance upgrades in three stages

Dodge has revealed what it calls Scat Package Stage Kits that enhance the performance of the Charger and the Challenger equipped with the 5.7-liter V8, and the Dart equipped with the turbocharged 2.4-liter inline four-cylinder engine. The Scat Packs use Mopar performance parts that also can be bought separately. Most of the upgrades increase engine output, but Dodge somehow manages to not specifically mention the power gains associated with each Scat Pack.
The three Scat Packs offered for the V8-powered cars focus on higher power ratings, and each stage comes complete with a unique engine-management calibration to optimize output. Stage one comes with a cold-air intake and a cat-back exhaust; stage two adds a performance camshaft; and stage three really gives you the goods, adding ported polished cylinder heads and performance headers.
For the Dart, the Scat Packs focus on engine, transmission, chassis and brake upgrades. Stage one will net you a cold-air intake, a short-throw shifter and slotted rotors with performance brake pads; stage two adds a cat-back exhaust system and an engine-management calibration to increase output by taking advantage of premium-octane gasoline; and stage three adds 13-inch vented brake discs up front clamped by four-piston calipers, suspension with adjustable springs and struts and performance front and rear antiroll bars.

Old vs. New: 2014 SRT Viper takes on upgraded 16-year-old Dodge Viper

It's easy to play the "Would you rather have a New X or an Old Y with a bunch of upgrades?" game more often than we care to admit, but the crew at Car and Driver have taken bench racing to the next level with their latest video. In it, the magazine pits a brand-new 2014 SRT Viper against a highly modified 1997 Dodge Viper GTS. There are 16 years between the time this particular GTS rolled off the production line and when the new car bowed, but that doesn't mean the old snake's owners have been sitting on their hands.
Thanks to a spate of modifications, the GTS offers up a better power to weight ratio than the new machine, but is that enough to overcome the technological leap forward represented by the 2014 Viper? We won't spoil it for you. You'll just have to check out the full clip below for yourself.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat