Dodge Ram Van, page #14

Dodge Ram Van Price Analytics

About Dodge Ram Van

Auto blog

2018 Dodge Demon comes with a factory tune for race gas

We knew the Dodge Demon was going to make a lot of power, but the ongoing question has been how much. We've seen estimates of between 757 and 1,121, but those have simply been guesses based on the numbers found in promo photos. However, if we had to put our bets on a horsepower rating, we'll probably go with the higher estimates because the Demon can run on race gas. Yes, the latest teaser for the Demon reveals that it will come with a factory tune optimized for race gas, which is rated at 100 octane or higher. Running such high octane, in combination with its heavy-duty intake cooling, means the Demon can handle absurd amounts of boost and advanced timing without running the risk of dangerous pre-ignition or detonation. Of course this also means the Demon should be capable of astonishing power with the high-octane calibration. The tune will be included in the Demon crate on a separate engine computer that the owner can swap out when he or she is ready to race. In addition to the computer, the center stack also has a button to activate the high-octane mode. A pair of fuel pumps and larger injectors also ensure the engine gets plenty of that sweet racing fuel. When not running the high-octane tune, the Demon runs on your average premium gasoline. Also, in case you accidentally run premium gas with the high-octane mode activated, the car will automatically switch to the default tune if engine knock is detected. You can get a peek at the system in the video above, and be on the lookout for a bonus video tomorrow. The full reveal will be next week on April 11 at the New York auto show. Related Video:

Camel-power and Challengers | Autoblog Podcast #510

On this week's podcast, Mike Austin and David Gluckman are in a huddle room, because the studio was already taken. We talk about the Dodge Challenger GT all-wheel-drive and who would want one. (And a correction we'll mention in next week's podcast - the trunk lid on the Challenger does wrap around vertically for a decent-sized opening.) Then David has a new performance metric to introduce, proposed by Nissan. The episode wraps up with the traditional doling out of Spend My Money buying advice, with an update on the feasibility of the one-year Ferrari financial plan. The rundown is below. Remember, if you have a car-related question you'd like us to answer or you want buying advice of your very own, send a message or a voice memo to podcast at autoblog dot com. (If you record audio of a question with your phone and get it to us, you could hear your very own voice on the podcast. Neat, right?) And if you have other questions or comments, please send those too. Autoblog Podcast #510 Topics and stories we mention Dodge Challenger GT Long-term Mazda MX-5 Miata Mazda CX-5 Nissan Camelpower The Alchemist by Paolo Coelho Used cars! Rundown Intro - 00:00 What we're driving - 02:11 Camelpower - 17:28 Spend My Money - 24:39 Total Duration: 44:17 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Feedback Email – Podcast at Autoblog dot com Review the show on iTunes Podcasts Dodge Car Buying dodge challenger gt

Dodge Demon's A/C helps its supercharged Hemi make more power

Staying cool is one important key to performance. Simply, more air means more power, and cool, dense air is better than hot air. While forced induction might help make copious amounts of horsepower, turbos and superchargers produce heat. Intercoolers help, but the new Dodge Demon and its supercharged Hemi need a bit of an extra boost. In Drag Mode, the Demon's engine commandeers the car's air conditioning system to help chill things out. The Demon will have the first production application of a liquid-to-air charge air cooler chiller system. Literally, the car's air conditioning system is used to cool the air going into the engine, dropping temps by up to 45 degrees Fahrenheit. Dodge claims the system helps achieve "temperatures previously unattainable by pressure-charged street-legal production vehicles." As cool as this may sound, the technology isn't new. Ford had a prototype system in the early 2000s called SuperCooler, though that system never made it to production. While the Demon's system doesn't have a super cool name like the one from Ford, the pair essentially work in the same way. In theory, it should have the same effect as a bottle of nitrous. According to Autoweek, Ford's system bumped up the output of the F-150 Lightning by about 50 horsepower. Turns out that air conditioning isn't always a huge power suck. Related Video:

2017 Dodge Durango GT Brass Monkey: A funky winter drive

The 2017 Dodge Durango is one of our favorite sport utility vehicles. It has power and style and it stands out in a segment that is filled with vanilla-flavored people haulers. We recently had a Durango GT outfitted in Brass Monkey trim – highlighted by its 20-inch burnished bronze aluminum wheels - and took to the back roads of Michigan for an extended drive. The snow was flying. The temperatures dropped. It was muddy. The unpaved roads, pocked and rutted, were jarring, even though the forested setting was serene. The Durango had no trouble with any of it. Watch our video review for the complete experience.

Dodge Challenger SRT Demon TransBrake eliminates the need for brake torquing

Performing the perfect launch is key to drag racing. In order to get consistent starts, the engineers behind the Dodge Demon developed TransBrake, a system that holds the output shaft of the automatic transmission to keep the vehicle stationary until launch. Rather than the traditional method of two-foot brake torquing, the system is triggered by pulling the shift paddle for quick and consistent launches. According to Dodge, the main benefit of TransBrake versus a two-foot setup is a quicker power delivery and higher engine launch torque potential. The system gives brake-free launches up to 2,350 RPM, a 105-percent increase in launch boost pressures, and a 120-percent increase in engine launch torque. Dodge also claims that using the paddle provides a 30-percent better reaction when compared to using your feet. In addition to shifting duties from your feet to your hands, the Demon's TransBrake will preload the driveline. Torque is loaded at the wheels, not the transmission. That means full torque delivery 150 milliseconds after the shift paddle is released. It should also help reduce the driveline shock that occurs when those 315 section rear tires get near-instant grip. The reveal is coming near. Continue checking out Autoblog and ifyouknowyouknow.com every Thursday until the New York Auto Show. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. New York Auto Show Dodge Coupe Performance drag racing dodge demon dodge hellcat drag strip

The 2018 Dodge Demon sounds like nothing else on the road

The Dodge Demon seems to have a torque problem, if making too much to easily contain can be considered a problem. In order to keep all that twist under control, the Demon has a new torque reserve launch system that works all sorts of engineering black magic to build boost without overloading the rear tires and brakes. That system, combined with the sticky Nittos and the fancy new suspension, should lead to some pretty spectacular 60-foot and 1/4-mile times. The way the system works is relatively straightforward. A bypass valve on the supercharger closes, "prefilling" the blower. In order to balance revs and torque, the computer can adjust fuel flow and spark on individual cylinders. The torque reserve kicks in when Launch Mode is initiated and the engine is turning at least 1,000 rpm. The goal is to reach peak boost quicker while efficiently putting down power. The side effect is a distinct exhaust note, which Dodge admits may make it seem like the Demon is broken. That seems to be the root of the "If you know, you know" tagline that the automaker has been using since the first teaser. Those interested can even download a ringtone, which might make it seem like you have a blown-out speaker on your phone. You can get a brief taste in the latest teaser video. In addition to the new info on the Launch Mode, Dodge released a couple of new teaser images. We briefly glimpsed one of these last week. It's a shot of the Demon's performance pages. The number 757 has appeared before, and all the talk of torque leads us to conclude that this is the Demon's torque output. The number 815 was seen in a separate teaser (shown below), which we feel may be the horsepower rating. If those numbers are correct, that would mean an increase of 108 horsepower and 107 lb-ft of torque, totally reasonable numbers given all the Demon's modifications. The license plate photo is another equation or code. This one, 3.9+221=405, is just as cryptic as the others. Look for more news and hints at ifyouknowyouknow.com in the weeks leading to the Demon's reveal. Related Video: Related Gallery Dodge Demon Teasers View 17 Photos Dodge Coupe Performance supercharger dodge demon dodge hellcat

Dodge reveals a few of the goodies in the Demon crate

One of the teaser trailers for the eagerly anticipated Dodge Challenger Demon featured a big crate full of goodies for the car. As with the car, though, Dodge was a bit coy about what was inside, simply saying there were 18 items, consisting of tools and parts. Now we know what tools the car gets, and they're some very nice Snap-On pieces. All of the tools and accessories are branded with the Demon logo. And the tools included should be perfect for easy tire changes at the track. Specifically, the tools include a hydraulic jack, cordless impact wrench with charger, torque wrench, and a tire pressure gauge. There's also a fender cover to protect the paint when working under the hood, and a nice carrying bag with the Demon emblem on the side. And, naturally, all of the tools are limited-edition units made specifically to accompany the Demon. If you want to do anything more involved than wheel swaps, you'll need to supply a few tools of your own. But this should be good for the weekend drag racer or autocross driver who wants to drive down to the course on street tires, then throw on the sticky rubber at the track. Also, as you may have noted, these tools only constitute six items in Dodge's count, leaving 12 others that must be car parts. We know that among the parts are some factory Demon wheels, and items that Dodge describes as "Direct Connection Performance Parts" and the "Demon Track Pack System." Details on these remain scarce, but they will probably be revealed closer to the car's debut date of April 11. Related Video:

'Baby Driver' is a car chase movie set to music

The Fate of the Furious is certainly the 6,000-pound SUV in the garage of automotive movies, but that doesn't mean gearheads are starved for options. The upcoming film Baby Driver looks to be a winner for car guys, featuring exciting chases with cars including a "hawk-eye" Impreza WRX, a Dodge Challenger, and a 1980s Chevy Caprice. The movie is written and directed by Edgar Wright, whom you may know as the man behind movies such as Sean of the Dead, Hot Fuzz, and Scott Pilgrim vs. The World. And based on the two trailers released so far, seen above and below, it's about a young man by the name of Baby, who is a getaway driver for criminals. He's apparently the best in the business, and the secret to his success is the music he listens to while he's driving. He also wants out, but his boss, played by Kevin Spacey, has no intention of letting him go. Spacey is one of a number of major stars in the film, including Jamie Foxx and John Hamm. The driving action shown in the trailers definitely looks entertaining. The WRX is seen doing an array of drifts and J-turns. There is some driving precision on display here that wouldn't be out of place in a Gymkhana video. And it looks like Wright's attention to detail in his shots and transitions, as well as some solid comedy relief, are all going to be present. The film comes out this August. Related Video: News Source: Sony Pictures Entertainment / YouTube via Road & TrackImage Credit: Sony Pictures Entertainment / YouTube TV/Movies Chevrolet Dodge Subaru Videos baby driver

Everything is absurd in Fate of the Furious, including the car hacking

Truly ridiculous and absurd scenes and situations are a staple of the Fast and Furious series, And earlier trailers made it clear that Fate of the Furious wouldn't be any different as soon as the submarine appeared. However, it turns out the craziness has spread to the topic of car hacking. The hacker is Charlize Theron's character, Cipher, and she can apparently control any car in the world, and many of them at once. She uses this to great effect in creating giant rivers of rampaging automobiles through city streets, and waterfalls of cars flying off of parking structures. And if you look closely at these groups of vehicles, it is evident that she can even control older cars that have no automated steering or throttle capabilities whatsoever. We would ask how that works, but we know that's a silly question in the Fast and Furious universe. After all, this is the series that featured Dominic Toretto flying through the air over a freeway to catch Letty Ortiz and land on another car. And they survived. Your logic has no power here! We also noticed that Cipher seems to have a preference to hack vehicles from Fiat Chrysler. In the trailer, multiple Chrysler 300s, a Jeep Cherokee, a Jeep Grand Cherokee, and a Dodge Challenger all get some prominent screen time when they're being hacked. We're not so sure this is good product placement for the brand, particularly considering this is the same company that recalled over a million vehicles to fix a software issue that could lead to hacking. Maybe this is the trade-off for having the Dodge Challenger Demon as a hero car. There's more to this trailer than Chryslers and hacking though. It turns out that Cipher has been following Toretto for a few movies now. Also, characters fly with jet packs, and Dwayne "The Rock" Johnson's character shoves a torpedo out of the way, on ice, while hanging out of a truck. Check it all out in the video above. Related Video:

A look at the Dodge Demon's drag settings, modes, and go-fast tech

In the same video that gave us a peek at the 2018 Dodge Challenger SRT Demon's performance stats, there's a serious dump of info on the tech and tools that will likely help this muscle coupe slaughter drag strips. Dodge has outlined a few of them for us and we're using the power of inference to figure out the rest. Here's what we've gathered. A lot of these hints come from the Demon's version of Performance Pages, the infotainment screens that show what SRT models are doing and let the driver change the powertrain and chassis setup. There are a lot of Demon-only features, including line lock, a quick cooldown mode for the supercharged engine, and data recording. And of course there are pages to show a digital time slip with acceleration and braking figures, a g-load plot, and lots of gauges to track temps and levels. The engine output is shown in the video on a special Dyno page. It tracks horsepower and torque over time on the upper graph, and engine rpm and shift points on the lower graph. And we think it's still hiding something. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Any good drag car has a line lock, allowing the driver to lock the front brakes and leave the rears free to do a nice tire-warming (or tire-shredding, depending on length) burnout. Ford has it on the Mustang, Chevy puts it on the ZL1, and now Dodge is adding it to the Demon. It should help get the giant Nitto tires up to temp for a drag run. And once the tires are warm, there's launch control, just like on the SRT Hellcat, with selectable rpm to dial things in for the conditions. The Demon also has a shift light in the cluster, and the driver can set a shift point individually for each gear. After each drag run, you can activate Quick Cooldown, which Dodge says uses the first production application of After-Run Chiller – it runs the cooling fan and intercooler coolant pump with the engine off until the coolant reaches its target temp. It's shown in one of the slides above. The checklist on the left side of that page suggests it requires a set of conditions be met to work: engine off, hood open, and sufficient battery level. This further reinforces our theory that the supercharger is going to make big boost, beyond the Hellcat's 11.6 psi. And while you're waiting for the supercharger to cool off for another run, you can review the performance data the car records.