1997 Dodge Ram 3500 Utlity Van Generator Air Conditioning on 2040-cars

Auto blog

Chop the top of your new Dodge Viper for $35,000

We have good news, and we have bad news. First, the good: It's now possible to get a brand-new Dodge Viper roadster, which is nice, considering we're in the dead of summer and many of us like wind-in-the-hair motoring. Now, the bad: This is not a factory option from the automaker, instead coming courtesy of an aftermarket company called Prefix Performance, and that means it's going to cost you some serious coin.
Called Medusa, this drop-top Viper was created without the knowledge or consent of Dodge, but that's probably fine because Prefix works with the automaker already for the final preparation of the American supercar, including paint. According to the company, the current, fifth-gen Viper was built with a convertible version in mind, so no chassis strengthening is required. From the looks of the somewhat grainy photos available, the conversion appears of very high quality.
Want one? Well, that means you're going to need to procure a Viper - Prefix has 10 units ready for transformation as it stands - and that's going to cost at the very least $102,485. Then, you'll need to write a check for an additional $35,000 for Prefix to surgically remove the car's roof. Thing is, for that kind of cash, a prospective owner could buy, among other very nice options, a Viper hardtop and a loaded Miata, or a Corvette Stingray convertible and several pockets full of change. Or, perhaps a new Viper hardtop and a used, first-gen Viper convertible?

The Dodge Demon gets a Drag Mode and a lesson in Newtonian physics

It's Thursday morning, which means we have more news on the upcoming Dodge Demon, the pumped-up Challenger Hellcat variant that's looking to cause mayhem at a drag strip near you. This week's video, "Third Law," shows the Demon's revised suspension in action and displays another one of SRT's cryptic messages. Dodge claims that the 6.2-liter supercharged Hemi V8 in the Hellcat twins is compromised because it's fitted to a car that needs to be comfortable on the street in addition to a performer on the drag strip. Not so with the Demon, as Dodge says the car is "designed to be highly competent in all drive modes and configurations," including the all-new Drag Mode. Dodge says details about the new mode will trickle out over the next few weeks, but all the info this week focused on suspension. The "Third Law" in this week's title refers to Isaac Newton and motion: "When one body exerts a force on a second body, the second body simultaneously exerts a force equal in magnitude and opposite in direction on the first body." We're not sure what Newton would have thought seeing the sidewall wrinkling Nitto NT05R drag radials in action, but he'd probably have a reaction of some sort himself. An ideal suspension setup for the drag strip makes for a poor setup on the road. As Dodge puts it, the "old school" way to set up a drag car was to "get the quickest reacting springs upfront, the softest rebound front shocks that wouldn't restrict the springs' reaction, remove any restrictions (sway bar) and increase the compression of the rear shocks." This would give a car great front to rear weight transfer but made for very poor lateral direction control, meaning minor corrections were difficult. The Demon's Drag Mode will use electronics to give the car the best combination of launch and lateral stability. Dodge listed some of the parts to help aid in this goal. They also gave us a few equations that we can't make sense of. Let us know if you have any clues. Hardware: 35 percent lower rate front springs/28 percent lower rate rear springs 75 percent lower rate hollow front sway bar/44 percent lower rate rear sway bar Drag-tuned Bilstein Adaptive Damping Shocks Software: Rear = F/F and Front = F/S F/F – F/S maintained @ wide open throttle (WOT) F/F – F/F < WOT Traction control disabled/ESC maintained Result: 13.5=575@500 Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Junkyard Gem: 1992 Dodge Shadow America

A quarter-century ago, most Americans looking for a cheap transportation appliance went for cars like the miserably-stripped-down-but-bulletproof Toyota Tercel or the feature-laden-but-reliability-challenged Hyundai Excel. Chrysler, having just discontinued the elderly "Omnirizon" platform, took the Dodge Shadow and its Plymouth sibling, the Sundance and offered a car that was bigger, more powerful, and better-equipped than just about anything else for the price: the America! These cars depreciated hard and nearly all were crushed a decade ago, so sightings are extremely rare today. Here's one that I found in a Northern California self-service yard. This one still had windshield paperwork indicating that it was an insurance-company auction car (probably totaled in a fender-bender that caused $200 worth of damage) and that it was a runner at the time it got junked. Such is the fate of 24-year-old economy cars in rough shape. The Shadow was a member of the many-branched K-Car family tree, and the Shadow America came with the same 2.2-liter straight-4 engine that powered millions of Caravans, Daytonas, New Yorkers, and Lasers. You got more torque than the competition, plus a driver's-side airbag instead of the maddening automatic seat belts found in other low-priced cars of 1992. Of course, the paint tended to peel off within a few years and the build quality of the Shadow was hit-or-miss, but these cars were way nicer to drive than, say, a Tercel EZ or Subaru Justy. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. The perfect cars for an imperfect world! Related Video: Featured Gallery Junked 1992 Dodge Shadow America View 17 Photos Auto News Dodge Automotive History