1996 Dodge Ram Van 2500 7 Pass 138k!!!! on 2040-cars

Auto blog

Towing with the 2016 Ram lineup [w/video]

I do not tow things. Ever. Yet I recently found myself at the Fiat Chrysler Automobiles proving grounds in Chelsea, MI, where I'd be testing the hauling capabilities of Ram's current product range. This experience was not only a perfect education for a towing novice like me, but allowed me to tow far more weight than I'd ever consider hauling the real world, and all within the safe confines of the Chelsea Proving Grounds. There was an extremely diverse array of vehicles at my disposal, including Ram's gasoline- and diesel-powered offerings with trucks ranging from the 1500 on up through the 5500 Chassis Cab, as well ProMaster vans. Beyond that, FCA brought out a number of vintage Dodge pickups for me to play with, while also working with Case IH to provide a track-loader I could test. I put together a range of videos covering everything from the classics to the production trucks to the construction equipment. And despite some technical difficulties – you'll notice a distinct lack of in-car videos, with blame going to a corrupted micro SD card – I've assembled ten videos that give an up-close look at Ram's offerings. 2015 Ram ProMaster City Let's start small. The ProMaster City only has a towing capacity of 2,000 pounds. That's a reasonably impressive figure for a van that uses the same powertrain as a Chrysler 200. The 2.4-liter four-cylinder and nine-speed automatic weren't really bothered with the extra weight added by the trailer. Even when accelerating at freeway speeds, the ProMaster City didn't feel out of breath or hampered by its load. That said, the rear of the van was unloaded, which probably wouldn't be the case for most consumers. It's unclear how the City would feel if its driver were taking advantage of the max payload (1,883 pounds) and towing. 2015 Ram ProMaster 1500 To be polite, the Ram ProMaster is a difficult vehicle to like. Its awkward seating position is bus-like and lacks the visibility enjoyed by the Ford Transit or the utter driving comfort of the Mercedes-Benz Sprinter. Its 3.0-liter, four-cylinder turbodiesel engine, meanwhile, is something of an anomaly. While it's potent for a four-cylinder diesel, producing 295 pound-feet of torque and 174 horsepower, those numbers don't feel all that impressive when loaded down. The model I tested was barely using half of its 5,100-pound maximum towing weight and was loaded down with just 500 of its 3,620-pound payload. Yet it lacked the pluckiness of the smaller City.

2020 Dodge Charger Hellcat Widebody, Scat Pack Widebody get grip, go faster

You all knew this was coming. Dodge basically showed it to the public a few months ago. But it's finally official, the 2020 Dodge Charger Hellcat Widebody and naturally aspirated Scat Pack Widebody are going into production. Like the Challenger Widebody, the Charger version is defined by its, well, wide body, which is now standard on all Hellcats and an option on Scat Packs. The fender flares add a total of 3.5 inches of width. Dodge also tweaked the front and rear bumpers and added wider side skirts to help the flares blend into the body. The Hellcat gets a unique rear spoiler, whereas the Scat Pack sticks with the same one its scrawnier twin uses. 2020 Dodge Charger Scat Pack Widebody View 20 Photos But the big advantage to this wide body is the fact Dodge can stick way more tire under the Charger. All Charger Widebody models get 11-inch-wide wheels with 305-mm tires at all four corners. Each version gets revised suspension, too. The Hellcat gets stiffer front springs, thicker front and rear anti-roll bars and retuned shocks. The Scat Pack gets a similar update, but without the thicker front anti-roll bars. Both cars also get six-piston front brake calipers from Brembo with two-piece rotors. All these handling upgrades mean the Charger is an even more impressive track machine. Dodge says the Hellcat now pulls 0.96g on a skid pad, and the Scat Pack Widebody does a little better at 0.98g. The Hellcat has also improved its lap time of Chrysler's 2.1-mile test course by 2.1 seconds, and the Scat Pack improved by 1.3 seconds. Both cars are also still fast in a straight line, with Dodge saying the Hellcat will hit 60 mph in 3.6 seconds on the way to a 10.96 quarter-mile time. Which, Dodge proclaims, makes it the world's most powerful and fastest mass-produced sedan. The Scat Pack Widebody will hit 60 in 4.3 seconds on the way to a 12.4-second quarter-mile.

Fiat Chrysler halts European production as coronavirus hits demand

MILAN — Fiat Chrysler Automobiles (FCA) is halting production for two weeks at most of its European plants to help protect staff against the coronavirus pandemic and adjust to a slump in demand, the Italian-American carmaker said on Monday. Italy has been the European country worst hit by the crisis and the first to enforce a nationwide lockdown, which has now been replicated by Spain and, to a lesser extent, by France as the virus sweeps through the continent. With all non essential services closed, including car dealers, and people forced home except for strict working needs, many forecast a heavy fall in car sales in March. FCA — which according to analyst estimates produces around 25% of its vehicles in Europe — said the suspensions through March 27 would allow it "to effectively respond to the interruption in market demand by ensuring the optimization of supply." Ferrari, meanwhile, said it closed its two plants until March 27. Ferrari said it had so far ensured production continuity, and it already implemented all the health measures decided by the Italian government at the two sites, in hometown Maranello and in Modena. But it was "now experiencing the first serious supply chain issues, which no longer allow for continued production." Marco Opipari, an analyst at Fidentiis, said a few weeks of closures was not a big problem in an over-supplied European auto industry and lost production could be recovered later on. "The real problem is on the demand side, people are not buying cars now, and sales volumes are expected to be very bad in March, with a real impact on automakers' earnings," he said. FCA said in a statement that production for its FCA Italy and luxury Maserati units would stop for two weeks, extending a temporary closure period already planned for some Italian facilities. Affected plants are Melfi, Pomigliano, Cassino, Mirafiori, Grugliasco and Modena in Italy, Kragujevac in Serbia and Tychy in Poland. The FIOM union said FCA's decision was "necessary". The carmaker said the freeze would help it to resume activity promptly once market conditions allow it. "The group is working with its supply base and business partners to be ready to enable our manufacturing operations to deliver previously planned total levels of production despite the suspension when market demand returns," it said.