1990 Dodge B250 Base Standard Passenger Van 3-door 5.9l on 2040-cars

Auto blog

FCA's shifter fiasco proves novel gear selectors are a bad idea

What's wrong with PRNDL? Why are automakers trying to overly complicate the simple task of selecting gears? If there's any lesson to learn from the recent news that NHTSA is investigating 853,000 Fiat Chrysler vehicles over its problematic gear selectors, it's that the trend of fancy shifters needs to stop. Now. Last year, NHTSA opened an investigation into Jeep Grand Cherokee models, and has now expanded this probe to include the 2012-14 Chrysler 300 and Dodge Charger. The problem? The shifter – assembled by ZF – is confusing for many drivers. "Testing ... indicates that operation of the (electronic) shifter is not intuitive and provides poor tactile and visual feedback to the driver, increasing the potential for unintended gear selection," a NHTSA document states. More than 100 crashes and over a dozen injuries are linked to this problem, according to The Detroit Free Press. To us, the problem isn't just limited to FCA. These unnecessarily novel gear selectors are spreading like wildfire across the industry. Honda and Acura use a weird pushbutton setup. Lincolns have buttons on the dashboard. Jaguar's shifter electronically raises out of the center console. Mercedes uses a stalk with up-for-Reverse, down-for-Drive, push-for-Neutral arrangement. And what the hell is BMW thinking with its M cars? FCA has since abandoned the confusing shifters in question. The 300, Charger, and Grand Cherokee now use the rotary shift dial that's quickly proliferating across the company's brands. Simplistic gear selectors might not be sexy, but no one ever complained about not being able to find the right gear in a Hyundai Sonata. What's most interesting is that this NHTSA investigation could push FCA – and possibly other automakers – to redesign vehicle functions that otherwise operate as designed. Just because most people will never have a problem putting a Dodge Charger in Reverse doesn't mean there isn't a flaw with the design. But perhaps a more simplistic solution – good ol' PRNDL – would have prevented these issues from the start. Related Video: News Source: The Detroit Free PressImage Credit: Copyright 2016 AOL Government/Legal Chrysler Dodge Jeep FCA shifters

The Dodge Demon's massive torque wrinkles its massive tires

Horsepower doesn't mean a damn thing if a car can't properly put the power down. That's why Dodge has fitted the upcoming Demon with some of the stickiest road-legal rubber available. Those Demon-branded Nitto NT05R drag radials skirt by regulations with just the smallest of margins, and in order to maximize the potential of the 315/40R 18 size tires Dodge increased the car's torque multiplication with a higher stall speed for the torque converter and a 3.09 rear axle. The 12.6-inch-wide tires are fitted to 18x11-inch wheels at all four corners, and they're fatter than those 305-section front tires on the Camaro Z/28 that we raved about years ago. Dodge says the combination of soft, gooey rubber and the new gear ratio gives the Demon about a 15 percent larger tire contact patch, more than twice as much grip, and roughly an 18 percent increase in both converter torque and rear-axle torque multiplication. Simply put, the Dodge Demon moves. You can see the results in the teaser video above, which is titles "Multiplication" and shows the crazy wrinkling of the sidewall that results from putting that torque to the road. We wouldn't be surprised if the inner rim of the wheel needs some grip to keep the tire seated, something Chevy had to do on the last Z/28. There is something wonderful about Dodge's approach to performance cars. While the Ford Mustang and Chevrolet Camaro have moved on from their muscle car upbringings with proper track-focused models, Dodge has stayed true to its roots by developing a machine that's sole intent is traveling a quarter-mile quicker than anything else on the road. Twisty roads may be fun, but there is something wholly and deeply satisfying about going deep into the accelerator with a comical amount of power at your disposal. We can't wait. Related Video: New York Auto Show Dodge Coupe Performance dodge demon dodge hellcat dodge challenger srt demon drag strip

Hellcat motor 'fits like a glove' in the Wrangler and Gladiator, says Jeep

Just like "technically correct" is the best kind of correct, "technically possible" is the best kind of possible. Specifically, it's technically possible to slot a Hellcat crate motor into the Jeep Wrangler and Gladiator, as confirmed by Jeep brand chief Tim Kuniskis. Speaking to Australian media last week, Kuniskis went on to say that "everybody" keeps asking him if the supercharged, 6.2-liter Hellcat V8 fits in the Wrangler and Gladiator, and that the answer is yes. "It fits like a glove," said Kuniskis. But — there is a but — the fitment is so close for comfort, it makes the combination one that Jeep can never produce. "There's no air space around the engine [...] so you have no crush space, you have nothing that can be used to absorb energy in a crash. It's not a problem to put it in — other than emissions and fuel economy — except it would never pass any crash tests, and that's a problem," as Kuniskis told Drive. However, since the Hellcat is now out of the bag, it's probably only a matter of time until hobbyists with access to these engines will start putting them into Wranglers and Gladiators. And with the time-honored piece of advice — just don't crash into anything — it'd be a combination worth seeing and hearing. Just to throw it out there, a "Hellcrate" engine costs less than $20,000 new. Kuniskis also said that Jeep is "gauging interest" for the J6 concept, one of the Easter Jeep Safari concepts that were just revealed. "[The J6] is just a concept at this stage. But that doesn't mean we're not going to gauge interest for it." However, he said justifying its production is apparently "tough."