Red Crew Cab 1owner Financing Warranty 6.7 Cummins Diesel Auto Cloth Extras Nice on 2040-cars

Auto blog

Dodge Challenger ADR prototypes spied with massive rubber

In an effort to give the Dodge Challenger one last hurrah before making the switch to the Giorgio platform in 2018, Automotive News reports that the automaker will come out with the Challenger ADR. The ADR, which stands for American Drag Racer, is expected to be a wide-body, Hellcat-powered variant that is closely based off of the current model. The report seems to have merit, as photographers have captured Challenger prototypes testing with massive tires. The prototypes look extremely similar to the current Challenger SRT Hellcat with the same hood scoop, front fascia design, rear spoiler construction, and rear end. The white and purple vehicles, though, are wearing extremely wide tires. The extra-wide rubber on the prototypes appear to have a similar tread design as the ones found on the Dodge Viper ACR, which features the grippy Kumho Ecsta V720. While the ACR wears 295 mm tires at the front, the car's rear tires are massive at 355 mm. The tires found on the prototype don't appear to be as large as the ones found on the ACR, but are expected to be larger than the current Challenger SRT Hellcat's, which are Pirelli P Zero Neros measuring 275 mm at all four corners. The Challenger ADR, with its wider, stickier tires is expected to cater to drivers that are looking to put all of the supercharged 6.2-liter V8's power to the ground. The rear-wheel-drive ADR is expected to come with a wide-body kit, which is missing from the prototypes. The Hellcat-powered, wide-body Challenger ADR is expected to make an appearance later in 2017, with an all-wheel-drive model (sans Hellcat engine) known as the GT AWD following closely thereafter. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery Dodge Challenger ADR Spy Shots View 16 Photos Spy Photos Dodge Coupe Performance prototype testing dodge challenger srt hellcat

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

2020 Dodge Charger Widebody Daytona wrecked with 296 miles on the clock

The Dodge Charger SRT Hellcat Widebody Daytona 50th Anniversary Edition can do 0-60 faster than you can say its name, and one new owner appears to have proven that it can all go wrong just as quickly. This one-of-501 sedan currently resting on a Copart lot in California has already met its end.  Dodge named the model after NASCAR's season-opening venue. The Daytona 500 gets the numerical part of its name from the length of the race — 500 miles. This poor White Knuckle example didn't even live long enough to put that much distance behind it; it shows just 296 miles on its odometer, says Motor1.com, who spotted the wreck on Copart.  This poor Widebody suffered a front-end accident severe enough to pop the airbags, which is never a good sign. Both front fenders took a beating, and the passenger-side panel was ripped off completely. The hood was badly buckled in several places, and the bumper covers appear pretty badly thrashed. It's difficult to tell from these photos whether the front crash structure was badly mangled, but we suspect it didn't come out unscathed. The passenger-side front suspension clearly took a beating, as the tire on that side was de-beaded from the wheel.  On the bright side, multiple images show that the car's electrical system is intact; whether it starts and runs is another matter.  The Daytona 50th Anniversary Edition package is, fundamentally at least, little more than a plaque, a sticker package, and a re-rated 717 peak horsepower. What you really get for your money is exclusivity, and thanks to this little "oops," there's more of that to be had. Only 501 were built (to commemorate the number of production units required to homologate the original Charger Daytona for NASCAR racing); just 451 went to U.S. dealers, and the other 50 were reserved for the Great White North where it's built. These models are so scarce that some dealers were already tacking on tens of thousands of dollars in additional markup. Back in December, at least one dealer had slapped a $25,000 market adjustment on a Daytona model (in the same "White Knuckle" finish as the wrecked car here), and others were being spotted with similar tacked-on premiums.  Related Video: