2008 Dodge Ram 5500 Flat Bed Welding Truck One Owner Fully Service on 2040-cars
Houston, Texas, United States
Dodge Ram 5500 for Sale
New 2014 crew cab ram 5500 service truck with 11ft service body(US $53,816.00)
New 2014 ram 5500 regular cab with 16ft flatbed(US $47,851.00)
2011 ram 5500 crew cab, flatbed with brushguard and front wench, diesel(US $42,500.00)
2008 dodge ram 5500 crew cab flat bed 11ft 4x4 6.7l cummins diesel(US $19,950.00)
2013 dodge ram 5500 regualr cab diesel hot shot(US $46,914.00)
2011 dodge ram 5500 4x4 crew cab slt flatbeb w/gooseball
Auto Services in Texas
Yale Auto ★★★★★
World Car Mazda Service ★★★★★
Wilson`s Automotive ★★★★★
Whitakers Auto Body & Paint ★★★★★
Wetzel`s Automotive ★★★★★
Wetmore Master Lube Exp Inc ★★★★★
Auto blog
Hero gets his truck back better than new thanks to community support [w/video]
Sun, 29 Jun 2014You ever hear a story and start cringing before you hear the end because you know how it's going to turn out? That could very well have been the case with the story from a few weeks ago in West Valley City, Utah, where a 14-year-old kid stole his grandfather's Hyundai Veloster and took it for a joyride - through a park full of children. But instead it turned into a heart-warming tale of heroism and a community banding together to do what's right... and then some.
Bryson Rowley was that hero who identified the danger and, rather than sit idly by and watch the joyrider potentially run over a child, got into his truck and drove it into the menacing runaway hatchback. The collision caused some $7,500 to his 2008 Dodge Ram 2500, but instead of getting stuck with the bill - one which his insurance may very well have refused to pay since the crash was, technically speaking, intentional - his community pitched in a helping hand.
Bryan Ellison, who owns West Valley Carstar with his brother, saw the news on television and wanted to help. So he brought Rowley a rental car, picked up his truck and brought it back to his auto repair shop. People from around the community donated parts, and when all was said and done, some $15,000 of work and upgrades were performed on the Ram that was returned to an overwhelmed Bryson Rowley better than new. Watch the video below for the full story.
How to update and secure a vulnerable Chrysler Uconnect system
Sat, Jul 25 2015If you own one of the 1.4 million vehicles affected by the recent Chrysler software recall, you may want to watch this video. In it, we explain how to get the latest infotainment software loaded onto the 8.4-inch Uconnect system. The recall was a response to the findings of researchers who were able to hack into and remotely control a 2014 Jeep Cherokee through its cellular connection. Although Fiat Chrysler has worked with Sprint to plug most of the holes on the carrier side, there are still some vulnerabilities that only this latest software version can patch. Owners have three options to get the update: download it now, wait for a USB stick in the mail, or take the vehicle to an FCA dealer. Chrysler will be sending USB sticks loaded with the software update to customers. Anyone with an internet connection and a USB stick of their own with at least 4 GB capacity can speed things up by downloading the patch from the Uconnect website. We cover that process from start to finish in the video, with the final portion still applicable to those using the FCA-supplied USB stick. If after watching this you still don't want to tackle the patch yourself, you can take your vehicle to the dealer to have it done. Also note that this process is the same for all Uconnect updates, not just the one patching the exploits. Our demonstrator vehicle is a 2015 Ram 1500 pickup. The procedure should be very similar on other products with the 8.4-inch Uconnect system, with only the location of the USB port varying. Once you have the USB stick with the software on it – either after having downloaded it yourself or receiving it in the mail from Chrysler – the installation process is relatively simple. It takes about 15 minutes to perform the update; we edited out the wait in the video. To check whether or not your car's 8.4-inch Uconnect system is running the latest software, go to System Information on the touch screen's Settings page and look at Software Version. The update related to the recall is version 15.17.5. Related Video: Recalls Chrysler Dodge Jeep RAM Safety Technology Infotainment Videos Original Video hacking
The Dodge Demon gets a Drag Mode and a lesson in Newtonian physics
Thu, Feb 23 2017It's Thursday morning, which means we have more news on the upcoming Dodge Demon, the pumped-up Challenger Hellcat variant that's looking to cause mayhem at a drag strip near you. This week's video, "Third Law," shows the Demon's revised suspension in action and displays another one of SRT's cryptic messages. Dodge claims that the 6.2-liter supercharged Hemi V8 in the Hellcat twins is compromised because it's fitted to a car that needs to be comfortable on the street in addition to a performer on the drag strip. Not so with the Demon, as Dodge says the car is "designed to be highly competent in all drive modes and configurations," including the all-new Drag Mode. Dodge says details about the new mode will trickle out over the next few weeks, but all the info this week focused on suspension. The "Third Law" in this week's title refers to Isaac Newton and motion: "When one body exerts a force on a second body, the second body simultaneously exerts a force equal in magnitude and opposite in direction on the first body." We're not sure what Newton would have thought seeing the sidewall wrinkling Nitto NT05R drag radials in action, but he'd probably have a reaction of some sort himself. An ideal suspension setup for the drag strip makes for a poor setup on the road. As Dodge puts it, the "old school" way to set up a drag car was to "get the quickest reacting springs upfront, the softest rebound front shocks that wouldn't restrict the springs' reaction, remove any restrictions (sway bar) and increase the compression of the rear shocks." This would give a car great front to rear weight transfer but made for very poor lateral direction control, meaning minor corrections were difficult. The Demon's Drag Mode will use electronics to give the car the best combination of launch and lateral stability. Dodge listed some of the parts to help aid in this goal. They also gave us a few equations that we can't make sense of. Let us know if you have any clues. Hardware: 35 percent lower rate front springs/28 percent lower rate rear springs 75 percent lower rate hollow front sway bar/44 percent lower rate rear sway bar Drag-tuned Bilstein Adaptive Damping Shocks Software: Rear = F/F and Front = F/S F/F – F/S maintained @ wide open throttle (WOT) F/F – F/F < WOT Traction control disabled/ESC maintained Result: 13.5=575@500 Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.
































































































