Dodge Ram 3500 Quad Dually 4x4 Auto Trans on 2040-cars

Auto blog

Junkyard Gem: 1986 Dodge Ram 50

After years of selling the Isuzu Faster with Chevrolet LUV badges here, GM replaced it with the S-10 in 1982. Ford sold Mazda Proceeds with Courier badges for even more years, but ditched the Courier once the Ranger became available as a 1983 model. Chrysler was able to put truck beds on Omnirizons at that time, but didn't have the deep pockets to develop its own rear-wheel-drive small pickup; for this reason, Dodge-badged Mitsubishi Forte pickups continued to be available in the United States all the way through the 1994 model year. Here's one of those trucks, found in a Colorado car graveyard. The first Chrysler-imported Mitsubishi Fortes showed up in the United States as 1979 models. The Dodge-badged version was known as the D-50, while Plymouth dealers got theirs with Arrow badges. The Dodge D-50 became the Ram 50 for the 1981 model year, while the final Plymouth Arrow trucks were sold as 1982 models. Just to make things more interesting, Mitsubishi started selling its own vehicles in the United States beginning with the 1983 model year. That meant that the Ram 50 had to compete for sales with a near-identical twin sporting Mitsubishi badges. Things in the Chrysler-Mitsubishi universe got even more exciting a bit later, when there were four marques selling essentially the same car here simultaneously: the Mitsubishi Mirage, Plymouth Colt, Dodge Colt and Eagle Summit. All of the Dodge D-50s and Ram 50s came with Mitsubishi power under their hoods. This one has a 2.0-liter SOHC straight-four rated at 88 horsepower and 108 pound-feet. For a while, a 2.3-liter Mitsubishi diesel was available in the Ram 50. It had been discontinued by 1986, however. This one has the base five-speed manual transmission. It appears that this truck was being used for long-term storage of many, many boxes of random household stuff when it was banished to this place. Much of the stuff was scattered on the ground nearby. Perhaps it was parked at a rent-a-storage facility and got evicted for lack of rent payments. Much of the contents consisted of stacks of newspapers and magazines from the 1960s and 1970s. Here's an Art Buchwald column about then-Vice President Spiro Agnew from February 23, 1971. Here's a Beetle Bailey strip from the same year. There's plenty of history in the junkyard, if you know where to look. There must have been a half-ton of paper in this truck when it arrived here. Sadly, some family's photo albums were here as well.

Stellantis is open to putting a gas engine in its EVs to meet demand

With the EV segment caught in a tug-of-war between market demand and government regulations, carmakers are having to adapt to avoid losing both money and sales. Stellantis is keeping every option on the table, including putting a gasoline engine in its electric models. Natalie Knight, the chief financial officer for Stellantis, made the announcement while presenting the carmaker's first-quarter shipment and revenues results. She cited the Jeep Wagoneer S as an example: Unveiled in January 2024, it will go on sale with an electric powertrain, but the brand hasn't ruled out expanding the lineup with a gasoline-powered model later on, according to Wards Auto. It could be a hybrid, or it might not get any type of electrification. The call will depend on whether there is "a clear demand for that in the market," the executive said. Compare that with comments from new Jeep CEO Antonio Filosa, who has said hybridizing the Wagoneer S isn't in the cards — but making a PHEV version of the all-electric upcoming Recon, however, might be. "I don't want to ignore the fact that we want to stay close to the consumer, and if we see there's an opportunity with those models that we introduced as BEVs first, we'll look into that," Knight said. Stellantis plans to launch 25 new models globally in 2024, and 18 of those will go on sale with electric power. However, that doesn't necessarily mean they'll remain electric-only throughout their production run. The brands that live under the Stellantis umbrella can build a gasoline-powered version of an EV with relative ease because many of the cars in the group's portfolio ride on a multi-energy platform. For example, the new Dodge Charger (pictured) will go on sale with an electric drivetrain later in 2024, but the range will grow with the addition of a 3.0-liter straight-six in 2025. Across the pond, the Jeep Avenger (a small, hatchback-like crossover not designed with our market in mind) was hyped as an all-electric model when it made its debut in 2023, but it quietly gained a gasoline-electric hybrid drivetrain in early 2024. The city-friendly Peugeot 208 is offered with piston or battery power, too. One of the next electric recipients of a gasoline engine might be the new-to-us Fiat 500e. The retro-styled hatchback has exclusively been available as an EV since it went on sale in Europe in 2020, but executives are reportedly looking at turning it into a hybrid due to slow sales.

SpeedKore carbon-fiber 1970 Dodge Charger packs a 996-hp Demon engine

SpeedKore Performance does some pretty neat things with carbon fiber. SEMA is always the place to show off new and interesting builds, and SpeedKore has a few new offerings on display. We talked about the lightweight carbon fiber 2018 Dodge Demon late last week, but now that SEMA 2018 is in full swing, we've got a look at something even cooler, an all-carbon, Demon-powered 1970 Dodge Charger "Evolution." SpeedKore Performance is based in Wisconsin and has been churning out SEMA showstoppers for years. In addition to the Demon, take a look at this Shelby GT350R the shop modified a few years back. The Charger Evolution is named so because it further modifies the SpeedKore Charger "Tantrum" that was used in the " Fast and Furious" films. That car used a carbon composite body and was fitted with a 9.0-liter Mercury Racing twin-turbo engine making an absurd 1,650 horsepower. The Evolution might be down on power — only 996 horses thanks to a modified Demon crate engine — but the goal was to create something a little more usable than the Tantrum. Upgrades include a smaller supercharger pulley, larger fuel injectors, a custom cold-air intake, stainless steel headers and a custom exhaust with SLP mufflers. There's also a Dailey Engineering dry sump, upgraded oil cooler, and Saldana radiator. It's also lighter, thanks to even more carbon fiber. SpeedKore had a goal to get the '70 Charger to about 3,200 pounds. To get there, the Evolution employs carbon-fiber bodywork, an aluminum floor, a steel roll cage and a new 2x3-inch steel box frame. SpeedKore's autoclave is large enough to bake a one-piece roof, hood and quarter panels. The bare bodywork has been finished with a clear coat to help prevent fading. The Evolution uses billet aluminum for the door handles, fuel cap and grille, all finished in a bronze-nickel coating to pair with the HRE wheels. In addition to the floor, aluminum was used for the firewall, transmission tunnel and radiator shroud. To slow the Charger down, it uses Brembo brakes with six-piston calipers up front and four-piston calipers in the rear. The suspension uses Penske adjustable coilovers while Michelin Pilot Sport 2 tires wrap 19x10-inch front wheels and 20x12-inch rear wheels. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.