Dodge 3500 4x4 Manual Turbo Diesel 6 Speed Crew Cab Longbed We Finance Certified on 2040-cars

Auto blog

Junkyard Gem: 1987 Dodge Ram 50 with V8 swap

Chrysler did very well selling Mitsubishi Forte pickups with Plymouth and Dodge badging in the United States, even after Mitsubishi began moving the same trucks out of their own American dealerships in 1982. The 1987 Ram 50 2WD short bed weighed in at just over 2,500 pounds, so it was reasonably perky with its 2.0-liter G63B four-banger making 90 horsepower… but there's no replacement for displacement! At some point along the line, a Chrysler small-block V8 engine found its way into the engine compartment of this truck, now residing in a car graveyard in Sparks, Nevada. This was the cheapest new Dodge-branded pickup Americans could buy as a 1987 model, though it had to compete with its near-identical Mitsubishi Mighty Max twin for sales. The 1980s were great times for little pickups in the United States, but a desire for bigger cabs and more creature comforts doomed them by the dawn of the following decade. The most interesting thing about this engine swap is that it didn't involve a Chevrolet or Ford small-block V8. Both the Chevy small-block and Ford Windsor V8s are a few inches narrower than the Chrysler LA-series V8, which makes them easier to stuff into a small vehicle. It appears that engine length was the critical dimension in this case, since the Mopar seems to have had enough side-to-side clearance to avoid any slicing of Mitsubishi steel to make it fit. My guess is that whoever did the swap happened to have the engine handy and that's why it's here. Keeping it all Dodge might have been a factor in the decision as well, though the truck's Mitsubishi ancestry makes that unlikely. It was over 100°F out when I found this truck, so I wasn't motivated to check block casting numbers to determine exactly which LA engine we're dealing with here. The easiest LAs to get cheap for the last four or so decades have been the 318 (5.1-liter) and the 360 (5.8-liter), so one of those two is the most likely candidate here. Power levels for these engines got pretty dismal during the Malaise Era, but anyone with the wrenching skills to do this swap would have applied some basic power-enhancing wizardry before the engine went in. We can see there's an Edelbrock Performer intake manifold, and you might as well stab in a better camshaft if you're upgrading the intake. How much power? With a four-barrel carburetor on a dual-plane intake plus a meaner cam, 300 to 350 horsepower is easily achieved with one of these engines, even with stock exhaust manifolds.

2019 Dodge Challenger SRT Hellcat Redeye Widebody First Drive Review | Son of a beast

PORTLAND, Maine — They told us the Hellcat Redeye Widebody is a "Hellcat that's been possessed by a Demon." But what I'm telling myself is, Save it for the track. I hadn't even put the pedal all the way to the floor, and the world around me had warped in my peripheral vision. I peeled my skull from the headrest and contemplated the supercharger under the double-snorkel hood in front of me force-feeding air to the's 6.2-liter Hemi V8, producing a hair under 800 horsepower. With my stomach returning to its usual place, I tried to summon the patience not to roast the tires again. Relax, enjoy the drive, explore the car, and save the rest for the track. I tried to restrain myself from adding to the many strips of rubber already smeared across the hilly, meandering roads between Portland, Maine and Club Motorsports across the state line in New Hampshire. But then there's always another stop sign, and something possesses me to misbehave again as I pull away. The 2019 Dodge Challenger SRT Hellcat Redeye includes a number of borrowed features that helped the Dodge Challenger SRT Demon slap me in the back of the helmet back at Lucas Oil Raceway. It has the same displacement Hemi with a 2.7-liter supercharger providing 14.5 PSI of boost. That pressure is thanks in part to the "Power Chiller," which diverts the A/C refrigerant to cool the air intake. It offers the torque reserve system for explosive launches, as well as the strengthened driveshaft to handle it all. It won't do a wheelie, but it'll scream in your face as it hurls you straight to jail. Compared to the standard Hellcat, it gets a higher top speed of 203 miles per hour, and quarter mile times reduced by a precious tenth of a second (11.1 seconds at 131 mph for the standard Redeye, and 10.8 seconds at 131 mph for the Redeye Widebody). That said, Dodge has ensured that Demon reigns supreme in the Challenger hierarchy. For one thing, the Demon has 840 horsepower and 770 pound-feet of torque, compared to the Redeye's 797 horsepower and 707 pound-feet. The Demon's suspension is specifically tuned for the weight transfer characteristics of drag racing, and can lift its front wheels off the ground if you nail the launch with the narrow tires on it. Also, while the Redeye does have line lock to let the rear wheels spin while braking the front calipers, it doesn't get the Demon's transbrake to keep the car locked into position as throttle is applied for launch.

Towing with the 2016 Ram lineup [w/video]

I do not tow things. Ever. Yet I recently found myself at the Fiat Chrysler Automobiles proving grounds in Chelsea, MI, where I'd be testing the hauling capabilities of Ram's current product range. This experience was not only a perfect education for a towing novice like me, but allowed me to tow far more weight than I'd ever consider hauling the real world, and all within the safe confines of the Chelsea Proving Grounds. There was an extremely diverse array of vehicles at my disposal, including Ram's gasoline- and diesel-powered offerings with trucks ranging from the 1500 on up through the 5500 Chassis Cab, as well ProMaster vans. Beyond that, FCA brought out a number of vintage Dodge pickups for me to play with, while also working with Case IH to provide a track-loader I could test. I put together a range of videos covering everything from the classics to the production trucks to the construction equipment. And despite some technical difficulties – you'll notice a distinct lack of in-car videos, with blame going to a corrupted micro SD card – I've assembled ten videos that give an up-close look at Ram's offerings. 2015 Ram ProMaster City Let's start small. The ProMaster City only has a towing capacity of 2,000 pounds. That's a reasonably impressive figure for a van that uses the same powertrain as a Chrysler 200. The 2.4-liter four-cylinder and nine-speed automatic weren't really bothered with the extra weight added by the trailer. Even when accelerating at freeway speeds, the ProMaster City didn't feel out of breath or hampered by its load. That said, the rear of the van was unloaded, which probably wouldn't be the case for most consumers. It's unclear how the City would feel if its driver were taking advantage of the max payload (1,883 pounds) and towing. 2015 Ram ProMaster 1500 To be polite, the Ram ProMaster is a difficult vehicle to like. Its awkward seating position is bus-like and lacks the visibility enjoyed by the Ford Transit or the utter driving comfort of the Mercedes-Benz Sprinter. Its 3.0-liter, four-cylinder turbodiesel engine, meanwhile, is something of an anomaly. While it's potent for a four-cylinder diesel, producing 295 pound-feet of torque and 174 horsepower, those numbers don't feel all that impressive when loaded down. The model I tested was barely using half of its 5,100-pound maximum towing weight and was loaded down with just 500 of its 3,620-pound payload. Yet it lacked the pluckiness of the smaller City.