Cab And Chassis With Cw Skirted Bed 4x4 Cummins Diesel Crew Cab Only 13k Miles on 2040-cars

Auto blog

2015 Dodge Charger shows off its new look in New York [w/videos]

With a new look inspired largely by the Dart compact, the 2015 Dodge Charger made its New York Auto Show debut today. Along with the interior and exterior changes, an eight-speed automatic becomes standard across the range.
What hasn't changed is the choice of engines under the Charger's long hood. A 3.7-liter V6 serves as the base mill, and can be had in both rear- and all-wheel-drive varieties, while the 5.7-liter V8 is an optional item and can be had in rear-drive only. Outputs are also carried over from last year, with 292 horsepower and 260 pound-feet of torque for the six-pot, while the Hemi V8 delivers 370 hp and 395 lb-ft of torque.
The new exterior treatment is a fairly large departure from the styling tone set by the Charger since its reintroduction to the US market in 2006. The blacked-out, crosshair grille and new headlamps are the biggest changes for 2015, though there are other, less immediately noticeable updates, such as the more rounded "Racetrack" taillamps that, like the front fascia, draw some inspiration from the Dart.

Will Dodge limit 2015 Challenger SRT Hellcat to 1,200 units?

With over 700 horsepower on tap and a price tag barely over $60k, Dodge appears on paper to have a winner on its hands with the new Challenger SRT Hellcat. But if you want to get your hands on one, you may have to act quicker than this most powerful of muscle cars covers the quarter-mile.
That's because, according to our compatriots over at Edmunds, Dodge may limit production - in the first year, at least - to just 1,200 units. That would amount to barely a quarter of the Challengers that Dodge moves each month, and would also mean only one Hellcat for every two Dodge dealers in the US - which could lead to some serious contention over which stores and which customers can get their hands on the ultimate Challenger.
Reached for comment, SRT spokesman Dan Reid told Autoblog that "there is no plan to limit production of the Challenger Hellcat," echoing the words of Dodge CEO Tim Kuniskis who told Edmunds: "We don't know what the market demand is." Which doesn't mean that it won't restrict production, but doesn't mean that it will, either. It just hasn't decided yet - or announced any such decision, at any rate - over what will be the final allocation strategy for what could be a game-changing muscle car. That is, at least, until new versions of the Mustang and Camaro come along in pursuit of Dodge's bragging rights...

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.