2012 Dodge Ram 3500 Hd Crew 4x4 Diesel Side Steps 8k Mi Texas Direct Auto on 2040-cars

Auto blog

2015 Dodge Challenger looks fresh, still plenty retro [w/video]

It was the Ford Mustang that kicked off the retro-styled muscle car renaissance back in 2005, but it was the Dodge Challenger that served as the movement's poster child, with its unabashedly retro looks. Over the years, though, as the Mustang and the Chevrolet Camaro were freshened and upgraded, the look of the big Dodge has remained largely consistent since its 2008 debut. For 2015, the Challenger has received a big freshening, boasting strongly revised front and rear ends and (finally, finally, finally) a redesigned interior.
Let's talk about that new cabin first. It's basically been plucked directly from the redesigned Charger, and boasts the same seven-inch IP display. The center stack's miserable, last-gen display has been replaced by an expansive, 8.4-inch UConnect system. Material quality should see a solid boost with the new cabin, as well.
The exterior, meanwhile, sees a revised front fascia with LED halo lights, as well as new grille inserts. A functional shaker hood scoop is a must-have extra on the V8 models, while the back of the car is highlighted by a new set of LED taillights that don't use the "Racetrack" design of Dodge's other models.

Junkyard Gem: 1987 Dodge Ram 50 with V8 swap

Chrysler did very well selling Mitsubishi Forte pickups with Plymouth and Dodge badging in the United States, even after Mitsubishi began moving the same trucks out of their own American dealerships in 1982. The 1987 Ram 50 2WD short bed weighed in at just over 2,500 pounds, so it was reasonably perky with its 2.0-liter G63B four-banger making 90 horsepower… but there's no replacement for displacement! At some point along the line, a Chrysler small-block V8 engine found its way into the engine compartment of this truck, now residing in a car graveyard in Sparks, Nevada. This was the cheapest new Dodge-branded pickup Americans could buy as a 1987 model, though it had to compete with its near-identical Mitsubishi Mighty Max twin for sales. The 1980s were great times for little pickups in the United States, but a desire for bigger cabs and more creature comforts doomed them by the dawn of the following decade. The most interesting thing about this engine swap is that it didn't involve a Chevrolet or Ford small-block V8. Both the Chevy small-block and Ford Windsor V8s are a few inches narrower than the Chrysler LA-series V8, which makes them easier to stuff into a small vehicle. It appears that engine length was the critical dimension in this case, since the Mopar seems to have had enough side-to-side clearance to avoid any slicing of Mitsubishi steel to make it fit. My guess is that whoever did the swap happened to have the engine handy and that's why it's here. Keeping it all Dodge might have been a factor in the decision as well, though the truck's Mitsubishi ancestry makes that unlikely. It was over 100°F out when I found this truck, so I wasn't motivated to check block casting numbers to determine exactly which LA engine we're dealing with here. The easiest LAs to get cheap for the last four or so decades have been the 318 (5.1-liter) and the 360 (5.8-liter), so one of those two is the most likely candidate here. Power levels for these engines got pretty dismal during the Malaise Era, but anyone with the wrenching skills to do this swap would have applied some basic power-enhancing wizardry before the engine went in. We can see there's an Edelbrock Performer intake manifold, and you might as well stab in a better camshaft if you're upgrading the intake. How much power? With a four-barrel carburetor on a dual-plane intake plus a meaner cam, 300 to 350 horsepower is easily achieved with one of these engines, even with stock exhaust manifolds.

2016 Dodge Viper ACR is ready to take a bite out of the Corvette Z06 [w/video]

The Dodge Viper ACR is back, and as Fiat Chrysler Automobiles tells it, it's the most venomous breed ever born. Before you get too excited, the 8.4-liter V10 produces 645 horsepower; five more than the standard Viper and five less than the supercharged Chevrolet Corvette Z06. It's unclear why Dodge didn't extract more from the huge engine, although we somehow imagine that certain people in Maranello, Italy had a say in the matter. Instead of blessing the ACR variant with bunches of extra output, Dodge instead turned to an aggressive aerodynamics package that it claims delivers nearly a ton of downforce at the Viper's maximum speed of 177 miles per hour. The total aero package includes an adjustable, twin-element, carbon-fiber rear wing, carbon-fiber diffuser, an extendable front splitter, and dive planes. Those big louvers on the hood? Yeah, they're removable, too. The "race-tuned" suspension uses coil-over Bilstein shocks that offer ten different settings and up to three inches of height adjustment. Kumho Ecsta V720 tires were built specifically for the Viper ACR, and come in 355/30 in back and 295/25 in front, with 19-inch wheels at all four corners. Along with the aero improvements, Dodge is claiming the Viper can pull a race-car-like 1.5Gs in higher-speed turns. Carbon-ceramic brakes with six-piston calipers add the stopping power that's greater or equal to the ACR's cornering performance. Dodge was also keen to reduce weight, taking some rather dramatic measures in the effort. The stereo has just three speakers, while the electric function was removed from the seats. Even the carpet has been replaced with a "lightweight" alternative. Finally, Dodge is offering up the innovative 1 of 1 customization it pioneered with the Viper GT earlier this year. That means that not only can you get the fastest Viper ever built, but it'll be entirely your own when you take delivery.